793624
18
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
18 ENGLISH
NOTICE: Be sure to mount the wire reel in the
 If it is mounted the
other way around, the wire will be released and may
be twisted.
4. Unhook the wire tip from the hook of reel.
Fig.13: 1. Hook
5. Make the tip of the wire straight, and pass the wire
through the guide.
Fig.14: 1. Guide
NOTE: If the tip of the wire is bent when it is passed

the tool.
NOTE: If you force the wire when trying to pass it

6. Pull the wire out approximately 10 mm from the tip
of the arm.
Fig.15: 1. Arm 2. Approximately 10 mm
NOTICE: If the length of the pulled-out wire is
󰀩󰀨
or tying strength may be compromised due to
󰀩
7. Rewind the wire to eliminate its slack.
Fig.16
8. Release the lock lever. The release lever returns,
and the wire is held by the left and right gears.
Fig.17: 1. Lock lever 2. Release lever
Fig.18: 1. Gear 2. Path of the wire 3. Wire
NOTICE: When the lock lever is released and
when the left and right gears mesh with each
other, the grooves in the gears form a space. This
space becomes the path for the wire. Make sure
that the wire is passed through this path.
9. Close the reel cover.
Fig.19: 1. Reel cover
Replacing wire guide B
Optional accessory
The wire guide B (in silver color) in the arm can be
replaced with an optional wire guide B (EG) (in black
color) according to the type of tying wire to use.
Find the right combination in the following table. Then
replace the standard equipped wire guide B with an
optional wire guide B (EG) if necessary.
Standard
equipped wire
guide B complete
(silver)
Optional wire
guide B complete
(black)
Annealing iron tie wire
Poly coated tie wire -
Galvanized tie wire -
: The combination is not valid.
1. Loosen bolts A and B using the hex wrench
included in the tool package.
Fig.20: 1. Hex wrench
Fig.21: 1. Bolt A 2. Bolt B 3. Contact plate cover
4. Standard equipped wire guide B (silver)
NOTICE: Do not forcibly remove any bolts that
cannot be removed using the hex wrench.
2. Pull the contact plate cover up in the direction of
the arrow and remove it. Bolt B will be removed at the
same time.
Fig.22: 1. Contact plate cover 2. Bolt B
3. Remove bolt A, and remove the standard
equipped wire guide B (silver).
Fig.23: 1. Bolt A 2. Standard equipped wire guide
B (silver)
4. Replace the standard equipped wire guide B (in
silver color) with an optional wire guide B (EG) (in black
color).
Fig.24: 1. Optional wire guide B (EG) (in black
color).
5. Align the pipe of the tool with the groove inside the
optional wire guide B (EG) (black), and assemble them.
Fig.25: 1. Pipe 2. Groove 3. Optional wire guide B
(EG) (black).
6. Fix the optional wire guide B (EG) (black) by tem-
porarily tightening bolt A.
Fig.26: 1. Bolt A 2. Optional wire guide B (EG)
(black).
7. Install the contact plate cover in the direction of
the arrow.
Fig.27: 1. Contact plate cover
8. Fix the optional wire guide B (EG) (black) and con-
tact plate cover securely by tightening bolt A and bolt B.
Fig.28: 1. Optional wire guide B (EG) (black).
2. Contact plate cover 3. Bolt A 4. Bolt B
9. 

Fig.29: 1. Contact plate
NOTE: If the contact plate is caught, press it as

Fig.30
OPERATION
Checking before work
CAUTION: If the tool has a safety mecha-
nism-related problem, do not use it. If you continue
to use it, an accident may occur.
Before using the tool, make sure that the safety mecha-
nism operates normally. If the tool operates without the
safety mechanism operating, stop using the tool imme-
diately. Ask your local Makita Service Center for repairs.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita DTR181 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita DTR181 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens als bijlage per email.

De handleiding is 38.41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info