598434
7
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
7
Storage
- The brushcutter must be safely stored in a dry room. Use the
tool protection for metal cutting tools. Keep the brushcutter out
of reach of children.
- If the brushcutter is stored for a long period of time, it should be
given a thorough maintenance check and a complete inspection
at an authorized MAKITA service centre.
- If the brushcutter is stored for a long period of time, the fuel
tank should be completely emptied and the carburetor run dry.
Fuels may only be stored for a limited period of time and could
cause deposits to form in the tank or in the carburetor.
- Fuel remains in reserve canisters should be used for other
engines or disposed of.
Maintenance
- Always make sure the brushcutter is in good working order
before using it. This includes in particular the cutting tool,
guard, harness and fuel system (check for leaks). Particular
attention must be paid to the cutting blades, which must be
correctly sharpened.
CAUTION: Metal cutting tools must be sharpened only at an
authorized service centre!
A tool which has been improperly sharpened can cause
unbalance and thus considerable danger of injury. Apart from
this, the equipment may be damaged due to vibrations.
- When changing the cutting tool, cleaning the brushcutter and
the cutting tool etc., it is essential to switch off the engine
and pull the spark plug cap.
- Replace cracked, bent, warped, damaged or dull cutting
tools immediately. Never straighten or weld damaged cutting
tools.
- Operate the brushcutter with as little noise and pollution as pos-
sible. In particular check the correct setting of the carburetor.
- Clean the brushcutter at regular intervals and check that all
screws and nuts are well tightened.
- Never service or store the brushcutter near open ames (16)!
- Always store the brushcutter in a locked storage area, with the
fuel tank completely empty and the carburetor run dry.
Observe the accident prevention instructions issued by the
relevant trade associations and insurance companies. Do not
make any modi cations to the brushcutter - you will only be
putting your own safety at risk!
The performance of maintenance or repair work by the user is
limited to those activities described in this instruction manual. All
other work must be done by the MAKITA customer service (17).
Use only original MAKITA spares and accessories.
The use of non-MAKITA spares, accessories, or cutting tools in-
creases the risk of accident. MAKITA will not accept any liability for
accidents or damage caused by the use of non-approved cutting
tools and xing devices of cutting tools, or accessories.
First Aid
A rst-aid kit should always be nearby as a precaution in the
event of an accident.
Immediately replace any items taken from the rst aid kit.
When calling for help, give the following information:
Place of accident, what happened, number of persons injured,
nature of injuries, your name.
NOTE
Individuals with poor circulation who are exposed to excessive
vibration may experience injury to blood vessels or the nervous
system. Vibration may cause the following symptoms to occur in
the ngers, hands or wrists: ”Falling asleep” (numbness), tingling,
pain, stabbing sensation, alteration of skin colour or of the skin. If
any of these symptoms occur, see a physician!
18
16
19
17
SERVICE
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita BCM2610 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita BCM2610 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info