598434
5
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
5
- Ensure that no fuel or chain oil oozes into the soil (environmental
protection). Use an appropriate base.
- Refuelling is not allowed in closed rooms. Fuel vapors will
accumulate near the oor (explosion hazard).
- Carefully tighten the locking screw of the fuel tank and inspect
the fuel cap at regular intervals.
- Change the place before starting the engine (at least 3 meters
from the place of refuelling) (6).
- Fuel cannot be stored for an unlimited period of time. Buy
only as much as will be consumed in the near future.
- Use only approved and marked containers for the transport
and storage of fuel. Ensure children have no access to fuel.
Putting into operation
- Do not work alone. Another person must be nearby in case
of emergencies (within shouting distance).
- Children and other persons must remain more than 15 meters
(50 feet) from the working area. Keep an eye out for animals
as well (7).
- Before use always check that the brushcutter is safe for
operation:
Make sure the cutting tool is securely installed. The throttle
must automatically return to the off position when released,
and the throttle lever lock must work properly. The cutting tool
must not turn during idling. The handles should be clean and
dry. The on/off switch must function properly. The guard must
be undamaged and securely installed in the correct position.
Otherwise you are in danger of injury!
- Start the brushcutter only in accordance with the instructions. Do
not use any other methods for starting the engine (8)!
- Use this brushcutter and its cutting tools only for the uses they
are intended for as speci ed in the documentation.
- Start the brushcutter only after complete assembly and
inspection. Operation of the device is only permitted after
all the appropriate accessories are attached!
- The cutting tool must be equipped with its appropriate
guard. Never run the cutter without this guard!
- The cutting tool must not turn during idling. If necessary adjust
the idling speed.
- Before starting, make sure that the cutting tool has no contact
with hard objects such as branches, stones etc.
- The engine must be switched off immediately if there are any
noticeable changes in the behavior of the equipment.
- Should the cutting tool hit stones or other hard objects, im-
mediately switch off the engine and inspect the cutting tool.
- Inspect the cutting tool at frequent intervals for damage (de-
tect hairline cracks by means of tapping - noise test). Hairline
cracks can occur in the region of the base of the
teeth after long use. Damaged cutting tools and
cutting tools with hairline cracks must not be
used any longer under any circumstances.
- Operate the brushcutter only with the shoulder strap
attached, which is to be suitably adjusted before putting the
brushcutter into operation. It is essential to adjust the shoulder
strap according to the user’s size to prevent fatigue during use.
Never hold the cutter with one hand during use.
- When working with the brushcutter always hold it with both
hands (9). Keep proper footing and balance at all times.
- Operate the brushcutter in such a manner as to avoid inhalation
of the exhaust gases. Do not start or operate the brush cutter
in closed rooms (risk of gas poisoning). Carbon monoxide is
an odorless gas. Work only in well-ventilated places.
- When taking a break or leaving the brushcutter unattended,
turn off the engine (10) and set the brushcutter down in such
a way that there is no risk of injury to yourself or others.
- Never put the hot brushcutter onto dry grass or onto any com-
bustible materials.
- Shut off the engine during transport or when moving on to a
new location (10).
- Never operate the engine with a faulty exhaust muf er.
3 meters
(10 feet)
Schematic
drawing
Breaks
Transport
Refuelling
Maintenance
Tool Replacement
7
8
9
10
6
15 meters
(50 feet)
BCM2310
BCM2610
BCM3310
BCM2600
BCM3300
BCM4300
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita BCM2610 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita BCM2610 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info