672421
10
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
Operating manual English
7
Do not fill up with fuel
of specification E85!
Ejected objects and
rotating parts may
cause serious injuries!
Risk of injury from
rotating parts!
Keep hands and feet
away from rotating
parts.
Beware of hot sur
-
faces!
Keep fire away from
the fuel tank!
Petrol/Oil!
Always use clean and
fresh lead-free petrol
for mixing petrol.
Use only authorised
oil according to the
operating manual
for mixing petrol.
Maximum rpm.
Do not let the unit
run more quickly than
the maximum rpm.
Ignition switch
On /run/start
Ignition switch
Off/stop
Choke settings
Choke position
Operating position
Ensure that these symbols on the
unit are always in a legible state.
Replace damaged or illegible
symbols.
Symbols used in this manual
The following symbols are used
in this manual:
Danger
They refer to dangers which are
connected with the described
activity and which may result
in injury.
Caution
They refer to dangers which are
connected with the described
activity and which may result
in damage to property.
Note
Indicates important information and
application tips.
Operating and display
elements
Caution.
Damage to the appliance
This first describes the control and
display elements. Do not execute
any of the functions yet!
Fig. 1
1 Exhaust cover
2Spark plug
3 Starter handle
4 Tank cap
5 Intake pump/primer
6 Choke lever
7 Air filter cover
8 Hand grip
9 Upper drive shaft
10 Shaft coupling
11 Lower drive shaft
12 Cutting attachment cover
13 Line cutting blade
14 Line spool
15 Gearbox
16 Shoulder belt holder
17 Throttle lock
18 Throttle
19 Ignition switch
20 Throttle grip
21 Cutting blade with cutting
attachment cover *
22 Retaining bar *
23 Socket wrench *
* depending on model
Installation manual
Danger
Risk of injury from engine being
started unintentionally.
Protect yourself from injury.
Before working on the engine:
Switch off the engine.
Wait until all moving parts have
come to standstill; the engine
must have cooled down.
Remove spark-plug terminal.
Disposal instructions
Dispose of packaging remnants,
old units, etc., in accordance with
local regulations.
Installing and adjusting
the hand grip
Fig. 2a
Remove hand grip. To do this,
loosen the 4 screws.
Fit the anti-vibration rubber pad
on the shaft.
Place the hand grip from above
onto the anti-vibration pad.
Align the holes of the lower
retention plate with the screws in
the hand grip. Screw in the 4
screws. Do not tighten yet! Hold
the unit in the operating position
(Fig. 12) and move the hand grip
into the position which offers you
the best grip.
Tighten the 4 screws until the
hand grip is secure.
Installing/removing the lower
drive shaft
Fig. 2b
Installation
Remove protective cap (optional)
from the shaft coupling and lower
drive shaft.
Turn screw handle (1) on the shaft
coupling (2) anti-clockwise
to open the shaft coupling.
Press release button (3)
on the lower drive shaft and push
the shaft into the shaft coupling
until the release button engages
in the retaining hole (4).
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw MTD BC43 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van MTD BC43 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van MTD BC43

MTD BC43 Gebruiksaanwijzing - Nederlands - 17 pagina's

MTD BC43 Gebruiksaanwijzing - Deutsch - 18 pagina's

MTD BC43 Gebruiksaanwijzing - Français - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info