568561
10
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
GB
VDV-B90 | ENGLISH
1010
INTRODUCTION
VIDEO INTERCOM MODULE VDV-B90
AUDIO INTERCOM MODULE ADV-B40
Thank you for purchasing an m-e product. This add-on module allows
you to equip existing intercoms, which are fitted inside e.g. letter box
systems or pillars, with the VISTADOOR system or convert them to this.
Internal units of the VISTADOOR and VISTUS systems can be connected.
It is suitable for connecting up to six parties.
CONTENTS
Tech box
Loudspeaker module c/w 50 cm long connector cable
Microphone module c/w 50 cm long connector cable
Camera module c/w 50 cm long connector cable (only VDV B90)
Adhesive pads for securing in position
Light sensor c/w 50 cm long connector cable
Available as optional accessories
External camera mod. VDV 500 Xcam, Xcam Pro1, Xcam Pro2, Xcam Pro3
Cap rail power supply unit mod. DT 2000
Mains adapter mod. ST 1000
Requirements
A simple make contact for each apartment is all that is needed in terms
of bell push. If a loudspeaker and microphone are present, these must
meet the following specifications if they are to work properly with the
add-on module:
Loudspeaker
Impedance: 8 ohms
Power: minimum of 0.5 watts
Microphone
Electret microphone
Phantom power: 5 volts (ensure correct polarity)
If the technical data are not known, to prevent any problems with
voice transmission, you should replace the existing loudspeaker and
microphone with the loudspeaker and microphone supplied.
KEY
1. Tech box
1.1. Housing cover
2. Cable entry
3. Terminal (button, microphone, loudspeaker etc.)
4. Terminal (connection for internal units)
5. Terminal for door opener
6. DIP switch user code
7. DIP switch door opener time
8. Terminal for external camera
9. Volume potentiometer
10. Piezoelectric beeper
11. Mounting holes
12. For unlocking housing cover
13. Strain relief (2x)
14. Adhesive pad for microphone module
15. Adhesive pad for camera module (4x)
16. Adhesive pad for loudspeaker module
17. Camera module (only VDV B90)
18. Loudspeaker module
19. Microphone module
20. Power LED
21. CDS sensor
CONNECTION OPTIONS FOR THE TECH BOX
Top connection terminal (26-pole)
LED+ and LED-: This is for connecting an LED which lights up when
the door opener is operated to indicate to the visitor that the door is
being opened. Output: 5 V DC max. 50 mA
MIC+ and MIC-: This is for connecting the microphone, the white
cable to + and the black cable to -.
KEY1 to KEY6 (2 screw terminals each): This is for connecting the
relevant bell push. KEY1 activates the internal unit, which is connected
to VIDEO1 and AUDIO1, etc.
9_12Vcc, GND, VIDEO and IR: This is for connecting the camera
module. Red cable to 9_12Vcc, black cable to GND and yellow cable to
VIDEO. The fourth cable of the camera module is connected to IR.
SPK- and SPK+: This is for connecting the loudspeaker, the red cable
to + and the black cable to -.
CDS_L- and CDS_L+: This is for connecting the brightness sensor,
the red cable to + and the black cable to -.
VDV-B90+40_I-Manual_210x240_Fin3.indd 10 09.05.14 11:48
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ME ADV B40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ME ADV B40 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info