CAUTION:
Switch off the power to all equipment before making connections.
Read the instructions of each component you intend to use with
this unit.
Be sure to insert each plug securely. To prevent hum and noise,
avoid bundling the signal interconnection cables together with the
AC power cord or speaker cables.
Connection to audio components
DIGITAL OUT terminal
Connect one of the digital output terminals to the appropriate
digital input terminal of a digital device such as an AV digital
amplifier, CD recorder, MD deck, etc.
Use a commercially-available RCA coaxial cable or optical
digital cable.
When inserting the plug of the optical cable, the protective
shutter of the terminal will open and you should hear it click
into position when fully inserted. Be careful that you do not
force the plug, because this could result in damage to the
protective shutter, the cable, or the unit itself.
< Select the proper digital output setting in accordance with
your connection.
< With Super audio CDs, Digital audio signals cannot be output
from digital out terminals. Use analog connections.
A
Connection 1
6CH AUDIO OUT terminals
6 channel analog audio is output from these terminals.
If your amplifier has 6 channel analog inputs, connect them
with commercially-available RCA cables.
< Select Multi-Channel in the SETUP menu. (See page 32)
2CH AUDIO OUT terminals
2 channel analog audio is output from these terminals.
< Select Stereo in the SETUP menu. (See page 32)
Note:
< Match the cable colors to the jack colors.
Using the FRONT jacks will provide the best sound quality
when playing Audio CDs and SACDs.
C
B
