688764
22
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
22
Personal safety equipment
Your device at a glance
P.3, item1
1. Rollers
2. Blower nozzle
3. Suction tube
4. Grip for front hand
5. On/Off switch
6. Speed regulator
7. Grip for rear hand
8. Adjustment lever (blowing, vacuuming)
9. Catch-sack
Scope of delivery
Instructions for use
Leaf blower/vacuum
Catch-sack
Shoulder strap
Assembly
P.3, item2
1. Fit the two suction pipes sections together and
screw tightly.
2. Insert the suction pipe into the device and screw
into place.
3. Hook the shoulder strap onto the device as
shown.
Operation
Check before starting!
Check the safety equipment and the safe condition
of the device.
Check all parts to make sure they fit tightly.
Check whether there are visible defects: broken
parts, cracks, etc.
Attaching the cuttings bag
P.4, item3
Hook the collecting sack into the device as
shown with the front side and fold up at the han-
dle (10).
Ensure that the bag has slotted into place
securely.
Attaching the extension cable
P.4, item3
Plug the unit plug into the connector of the
extension cable.
Feed the extension cable through the strain relief
mechanism(12) as shown.
Selecting the operating mode
Set adjustment lever(8) to vacuum[ ] or
blow[ ].
When using as a leaf vacuum: Insert the collec-
tion bag (9) as shown into the device and ensure
that it clicks into place (P.4, item3).
Setting the blower or vacuum speed
Set the speed regulator (6) to the required blow-
ing or vacuuming speed.
Switching on and off
Set the On/Off switch to position [1] to switch
the appliance on.
Set the On/Off switch to position [0] to switch
the appliance off.
Cleaning and maintenance
Cleaning the device
Brush off coarse dirt.
Wipe down the device with a slightly damp cloth.
Clean the catch-sack regularly
Removing the collecting sack
P.4, item3
Push the unlocking button (11) and fold the han-
dle (10) downwards.
Rectify clogging
P.4, item4
Release the locking screw (13).
Fold up the housing cover (14) and remove any
blockage.
Unplug the mains plug before performing
any maintenance!
Risk of injury caused by rotating machine
parts!
Risk of injury caused by rotating machine
parts!
When working with the device, wear eye
and ear protection.
Wear sturdy shoes when working with the
device.
Wear protective gloves when working with
the device.
Wear tightly fitting clothing when working
with the device.
DANGER! Risk of injury! The device must
only be put into operation if no faults are
found. If any part of the device is defective,
it must be replaced before the next use.
Note: Work with leaf blowers/vacuums
may not be performed during normal quiet
hours.
DANGER! Risk of injury! Switch off the
product and disconnect the mains plug
before all cleaning and maintenance work.
Wait till all moving parts are completely
stopped.
GB
Laubsauger_Elektro_115158.book Seite 22 Donnerstag, 10. November 2016 2:03 14
22

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Lux-Tools-E-LS-2800-50-2

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lux Tools E-LS-2800-50 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lux Tools E-LS-2800-50 2 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 2,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info