688764
21
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
21
The vibration values specified in the technical data
represent the main uses of the device. The actual
existing vibrations during use may deviate from
these as a result of the following factors:
Incorrect use of the product;
Unsuitable tools inserted;
Unsuitable material;
Insufficient maintenance.
You can reduce the risks considerably by following
the tips below:
Maintain the device in accordance with the
instructions in the operating instructions.
Avoid working at low temperatures.
When it is cold, make sure your body and your
hands, in particular, are kept warm.
Take regular breaks and move your hands at the
same time to promote circulation.
Electrical safety
The device may only be connected to a socket
that is correctly installed and grounded.
The fuse must be a residual current circuit-
breaker with a measured residual current of no
more than 30mA.
Make sure that the power supply corresponds
with the connection specifications of the device
before it is connected.
The tool may only be used within the specified
limitations for voltage and power (see type
plate).
Do not touch the mains plug with wet hands!
Always pull out the mains plug at the plug and
not by the cable.
Do not bend, crush, pull or drive over the power
cable, protect from sharp edges, oil and heat.
Do not lift the device using the cable or use the
cable for purposes other than intended.
Check the plug and cable before each use.
If the power cable is damaged immediately dis-
connect the plug. Never use the device if the
power cable is damaged.
If the device is not in use make sure the plug is
pulled out.
Make sure that the device is switched off before
plugging in the mains cable.
Make sure that the device is switched off before
unplugging it.
Disconnect the power supply before transport-
ing the device.
Device-specific safety instructions
When working with the device, always maintain
a safe distance and natural body position.
Always hold the device firmly in both hands.
Before starting to work, check the working area
for animals and objects. Remove all objects that
may be slung away or become jammed in the
cutting tool.
Do not attempt to remove materials to be vacu-
umed or to hold material already vacuumed
when the motor is running. Only remove any
jammed material to be vacuumed when the
device is switched off.
No other persons or animals may be present
within an area of 15 m around the vacuuming
area, as they may otherwise by injured by
objects being slung away.
Only work in good light and vision conditions.
Do not work above head height! Do not lean for-
ward or back!
The operator must wear tightly fitting clothing.
Avoid wearing loose clothing. Wear sturdy shoes
and long trousers.
Take care when walking backwards. Danger of
stumbling!
Never work in the rain.
Vacuuming, blowing of heavy materials such as
metal, stones, branches, fir cones or broken
glass is expressly forbidden.
Keep all parts of your body away from the vac-
uum opening.
When working with the device, ensure that there
is sufficient lighting.
Always wear the required personal protective
equipment (Personal safety equipment–
p.22)
Be careful of the dust you have raised and flying
objects. Especially dangerous is the rebound
effect on walls or walls of houses.
Do not direct the device at people or animals
when vacuuming or blowing.
Before starting to blow, loosen foreign bodies
with a rake or broom.
The machine may only be operated during sen-
sible hours– not too early in the morning or too
late in the evening, as it may disturb other peo-
ple.
The times listed by the local authorities must be
adhered to.
The whole blower nozzle piece must be used so
that the airstream can work close to the ground.
Heed children, pets, open windows, and blow
the foreign bodies safely away.
Remember that moving parts may also be
located behind ventilation and venting slots.
Symbols which are on your device may not be
removed or covered. Notes on the device which
are no longer legible must be replaced immedi-
ately.
Be careful when handling the device! Ob-
serve all safety instructions in the instruc-
tions for use!
Read the instructions for use before use!
Do not subject the device to a humid envi-
ronment!
Maintain a safety distance!
Risk of injury due to flying parts!
GB
Laubsauger_Elektro_115158.book Seite 21 Donnerstag, 10. November 2016 2:03 14
21

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Lux-Tools-E-LS-2800-50-2

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lux Tools E-LS-2800-50 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lux Tools E-LS-2800-50 2 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 2,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info