BRAVO CHARCOAL GRILL
ASSEMBLY INSTRUCTIONS
STEP 10: ASSEMBLE THE CHARCOAL
PAN ASSEMBLIES
Assemble one assembly at a time to
avoid mixing up parts.
Identify the right charcoal pan assembly
[ T ]. See STEP 10A. Remove the push
plate rod from the right charcoal pan
assembly [ T ]. Using needle nose pliers
or pliers, pull the (2) locking pins from
the rod ends. Remove the push plate
rod from the (2) top support bars and
set aside. See STEP 10B.
Align the holes and assemble the
charcoal pan assembly to the cooking
chamber.
Start on the push plate side. Insert the
threaded sleeve bracket [ AF ] into the
hole and assemble the side with (2)
M5 x 15MM bolts [ AP ] as shown. See
STEP 10C.
Return the push plate rod to the
assembly inserting the ends of the rod
into the brackets and support bars.
Secure the rod with the locking pins.
See STEP 10D.
Finish by using (2) M6 x 10MM bolts
[ AQ ] to assemble the opposite side to
the cooking chamber. See STEP 10E.
Assemble the left charcoal pan [ U ]
assembly the same way.
LID NOT SHOWN IN DRAWINGS
FOR CLARITY
NOTE
PAGE 11
T
10A
STEP
AP
10B
STEP
AF
10E
STEP
T
LOCKING PIN
PUSH PLATE ROD
AQ
10C
STEP
AP
AF
PUSH PLATE ROD
LOCKING PIN
SUPPORT BAR
SUPPORT BAR
T
10D
STEP
LOCKING PIN
PUSH PLATE ROD
