785792
6
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
5

To turn on the camera, press the ON/OFF button on the bottom of the camera.
The camera turns on automatically when connected to the power source.
To turn off the camera, press and hold the ON/OFF button for about 3 seconds.
The camera will turn off automatically after a few seconds when it is unplugged. If you unplug the
dashcam whilst shooting, the dashcam will save the currently recorded video after a specified time and
turn off.

To access the settings menu, touch on the touch screen of the dashcam.
To scroll through the menu pages, use the arrows on the left side of the screen and touch the item to
activate its setting options. The currently selected item is displayed in orange.
To exit the settings menu, touch the arrow in the upper left corner of the display.

Recording starts when you touch . Press it again to stop recording.
Automatic recording – the automatic recording function is permanently enabled. Automatic recording
starts when the camera is plugged in. In a car with an ignition-dependent power supply, the camera turns
on and starts recording after starting the engine.
Photos are taken by touching the icon or using the voice command “LAMAX, PHOTO”.
Touch the icon to display the Video/Photo gallery. Videos are divided into folders:
Front camera videos
Rear camera videos
Protected front camera videos
Protected rear camera videos
Photo gallery
To switch from video back to gallery, press the arrow in the upper left corner. This also applies to returning
from the gallery to the main screen.

You can delete individual material directly on the camera in the gallery. After selecting the desired item, touch
the bin icon and press Yes to confirm.

When the memory card becomes full, it automatically starts overwriting the oldest captured videos with new
ones. To stop videos from being deleted, you must protect them.
Depending on the sensitivity set, in the event of an impact an activated G-sensor automatically protects
the video currently being recorded, thus preventing it from being overwritten.
The video currently being recorded can be protected with the voice command “LAMAX, PROTECT”.
You can also manually protect the video currently being recorded by pressing the lock icon on the screen
.
You can also protect recordings in the camera gallery: After selecting the desired item, touch the lock icon
located under the time and date on the right side of the screen. You can identify the protected entry by the
grey lock icon in the upper left corner. Press the lock icon again to unprotect the recording.

When the front and rear cameras are properly connected, the front camera image is displayed as the
main camera. Switching between the front and rear cameras is possible using the icon or the voice
command “LAMAX, FRONT” for the front camera, or “LAMAX, REAR” for the rear camera.
Another way to switch between viewing the front and rear cameras is to swipe your finger left or right
on the screen.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lamax S9 Dual bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lamax S9 Dual in de taal/talen: Duits, Engels, Pools als bijlage per email.

De handleiding is 7.64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info