753559
23
Verklein
Vergroot
Pagina terug
1/66
Pagina verder
23
EN
2. Set the machine start time with the timer: Press the SET button 3times, „88“ is
blinking in the hour display. Press the button to set the hour. Press the SET button
once again, „88“ is blinking in the minutes display. Press the button to set the
minutes.
3. Set the machine power off time: Press the SET button 5 times, „88“ is blinking in the
hour display. Press the button to set the hour. Press the SET button once again,
„88“ is blinking in the minutes display. Press the button to set the minutes.
4. Timer setting: Press the button to set the timer. You can choose between the
following function modes: Time to power on (ON) Time to power off (OFF)
Timer off. Power on default time is 08:00 and power off default time is 12:00.
CLEANING AND CARE
1. Unplug the appliance from the wall outlet before cleaning it or if it will not be used
for an extended period of time.
2. Use a damp cloth to clean both the interior and exterior of the appliance.
3. Do not use organic solvents, boiling water, cleaning agents, strong acid, alkaline
solvents, etc. for cleaning.
4. If the ice machine will be off use for a long time, you should unplug the appliance,
drain off the water and dry the appliance with a clean cloth. Store the ice cube
maker in a clean place.
Cleaning the water tank
First Phase:
Add equal parts of water and vinegar (1:1) into water storage box.
In standby mode, keep pressing the On/Off button at least 5 seconds to activate
self-cleaning mode. Please note self-cleaning mode will automatically start after
beep sound.
During the self-cleaning mode, pump will remain in continuous operation as it feeds
water to the bucket and evaporator coils. This cycle will continue for 5 times.
When self-cleaning is complete, the appliance automatically switches to standby
mode.
Second Phase:
Remove the rear drain cap and drain plug, and then drain off the water and grip
the nut.
Fill the water tank with fresh water up to the maximum permit water volume line.
In standby mode, keep pressing the On/Off button at least 5 seconds to activate
self-cleaning mode again which will now act as a rinse.
Upon completion of this nal stage of the self-clean process, the unit automatically
changes to standby mode. Proceed draining the water from the internal reservoir by
removing the rear drain cap and plug. Leave the upper lid open to allow the water
tank to dry.
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Klarstein 10033774 Clearcube LCD bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Klarstein 10033774 Clearcube LCD in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info