753559
22
Verklein
Vergroot
Pagina terug
1/66
Pagina verder
22
EN
4. Ice-Full reminder
When the drop ice testing panel is pressed down by ice cubes, the ICE-FULL indicator
will light up and the machine enters into ice-full reminder mode. If the ice cubes are
removed and the drop ice testing panel is raised again, the machine will go to ice-
making mode automatically.
5. Water leakage reminder
As the water level drops, the oat switch also lowers. When the oat switch is in low
level, the add water indicator will blink. When the pump is drawing water and the oat
switch is still in low level, the add water indicator will continue to blink. If the machine
has an automatically feed water function, the inlet valve will open automatically to add
water when the add water indicator blinking.
When the water leakage reminder appears, please add the appropriate volume of
water. Once the oat switch leaves the low level, the machine will enter into ice-making
mode automatically.
6. Malfunction reminder
If the ice maker machine can’t detect an ice drop signal for three times during ice
making process, it will show the fault icon and a buzzer sound will appear at the same
time. The machine goes into fault alert status. At this point, you need to check whether
there is ice or foreign bodies blocking the ice detection plate’s turning off. To end the
fault mode, tap lightly from above on the ice detection plate (the plate directly below the
evaporator grid) until a slight click is heard.
7. Self-clean mode
In standby mode, keep pressing the On/Off button for 5 seconds, the ice making, ice
full and add water indicators are blinking simultaneously, the machine enters into self-
clean mode. Press the On/Off button for 5 seconds to exit self-clean mode.
8. De-icing mode
In ice making mode, pressing the ice making button and the SELECT button (for ice
cube size selection) simultaneously for 5 seconds will interrupt ice cube production and
remove the ice (already produced ice is ejected into the ice cube storage box). Pressing
both buttons simultaneously again for 5 seconds will exit this mode and return you to
standby mode. If you want to continue with ice cube production, press the ice making
button again.
9. Clock and time setting function
1. Real time setting: Press the SET button one time, „88“ is blinking in the hour display.
Press the button to set the hour. Press the SET button once again, „88“ is blinking
in the minutes display. Press the button to set the minutes.
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Klarstein 10033774 Clearcube LCD bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Klarstein 10033774 Clearcube LCD in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info