1414
Instructions for use
Setting the timer value:
when a timer has been selected, you can change the timer value using the plus or minus keys. If a timer
value has not been set, pressing the minus key will set a value of 30 minutes, which can then be changed.
By holding down the plus or minus key longer, the set value will change faster. At a setting value of 99 or
01, the automatic repeat will automatically stop.
Turning off the timer early:
You can turn off the timer by setting the timer value to 00.
In the case of a cooking point timer, the corresponding cooking point will stay on.
Counting down the time set on the timer:
the time countdown starts as soon as a timer is set. If the value is changed using the plus or minus keys, the
timer starts on a full minute and any seconds that may have elapsed are cancelled.
Signal of a timer whose set time has run out:
If the timer value has reached 00, this will be indicated by an audible and visual signal. If a cooking point
timer has reached the set value, the corresponding cooking point will be turned off. Any cooking points or
timers selected will be deselected.
The timer value (00) is automatically displayed again and flashes. If it is a cooking point timer, the
corresponding decimal point will also flash. The signal lasts for 2 minutes, unless it is stopped earlier by
pressing any key.
After the signal, all the active cooking point displays will be visible again.
Control panel lock
Locking/activating control panel lock:
The control panel lock prevents accidental power-on. It can be activated when none of the cooking points
and on.
Locking:
You can activate the control panel lock after turning on the control.
To do this, you must simultaneously press the Front Right cooking point selection key and the MINUS key
and then press the Front Right cooking point selection key again. The “L”, for LOCKED, will appear on all
the displays. If a cooking point is “hot”, the display will flash with an alternating “L” and “H”. This
sequence of commands must be entered within 10 seconds and no other keys than those described must be
pressed, otherwise the activation will not be completed.
The control will remain locked until it is unlocked, even if it is turned off and on. A mains power failure
does not cancel the lock.
Temporary unlocking for cooking:
To unlock the control, you must simultaneously press the Front Right cooking point selection key and the
MINUS key. The letter “L”, for LOCKED, will disappear and all the displays will show “0” with a flashing
point. If one of the cooking points is “hot”, a flashing “0” and “H” will alternate with a flashing point.
After the control is turned off, the child lock will be active again.
Total deactivation of the lock:
You can disable the control panel lock after turning on the control. To do this, you must simultaneously
press the Front Right cooking point selection key and the MINUS key and then press the MINUS key
again. After you have entered the correct key sequence within 10 seconds, the lock will be deactivated and
the control will go into STANDBY, otherwise the entry will be considered incomplete and the control will
remain locked and will turn off after 20 seconds.
Booster
The boost function can be activated, for cooking points that have this option, when they have previously
been set to cooking level “9”, the respective cooking point has been selected and the plus key pressed
again.
It is only possible to activate the boost function if the induction module allows it (there are special
temperature limits in the generator for the boost function). If the booster function is allowed on the desired
cooking point, a “P” appears on the display.
