Wires Number x size
220-240 V ~ +
3 x 1.5 mm
2
Connection to the terminal block
For the electrical connection, use an H05RR-F or H05 VV–F cable as specified in the table below.
Electrical connection
Instructions for use
Operating principle
This is based on the electromagnetic properties of
most cooking containers.
The electronic circuit governs the operation of the
coil (inductor), creating a magnetic field.
The heat is transmitted by the container to the food.
Te cooking process takes place as follows:
• minimum dispersion (high performance);
• the removal of the pan (simply lifting it)
automatically stops the system;
• the electronic system allows maximum
flexibility and precision of regulation.
Installation
All installation operations (electrical connection)
must be carried out by people qualified in
compliance with the laws in force.
For specific instructions, see the installation
section.
Important: This apparatus is not suitable for use
by person (children included) with reduced mental
and physical capacity or with lack of experience
and knowledge unless having previously received
suitable training fot its use by persons responsable
for their safety.
It must be ensured that children do not play with
the apparatus.
Use
First of all, position the pan in the chosen cooking
area.
The absence of the pan display means the
system cannot start.
On/off of the Touch Control
The electronic Touch Control is activated by means
of the ON/OFF button and switches from the OFF
mode to the Standby mode.
To do so it is necessary to press the ON/OFF
button for 1 second. A short Beep will be heard.
When in standby, “0” is displayed on the display of
the cooking zone.
This display may go into background due to a
residual heat or error signal.
If a cooking zone is activated during the standby
time (10 sec.), the control switches over to the On
mode. If no introduction is made within the 10 sec.,
the control automatically switches to OFF with a
short beep.
The electronics can be switched to the OFF mode
at any time during the ON mode or the Standby
mode by pressing the ON/ OFF button. The Off
function has priority when operating, meaning that
the control switches off even by activating several
buttons at the same time.
1. On/off
2. Child safety (key lock)
3. Power increase
4. Power Decrease
5. Key Lock
6. Power Booster
Switching on a cooking zone
In standby or active mode, a cooking area can be
activated by using the Plus/Minus buttons.
If starting with the “+” button, the cooking level