7
Table of programs
Deter-
gent
Consumption
Drying
Phase
Programs
Available
options
Loading instructions
Litres kWh Minutes
1)
P1
Sensor Dynamic 40-70°C
Clean
Delay
Multizone
Dynamic
Clean
Use for normal soiled dishes with
dried-on food. Senses the level
of soiling on the dishes and
adjusts the program accordingly.
When the sensor is detecting the
soil level an animation appears
in the display and the cycle
duration is updated.
The Dynamic Clean
option is activated automatically
with this program.
To deactivate,
press the Dynamic Clean button
on the control panel.
X 7-14 1.00-1.65 80-165 Full
P2
Pre-Wash cold
Delay
Multizone
Crockery to be washed later. - 4.0 0.03 14 NO
P3
Fragile 40°C
Delay
Multizone
Light soiling, for example glasses
and cups.
X 10.0 0.85 100 Light
P4
Fast 45°C
Delay
Multizone
Lightly soiled crockery,
with no dried-on food.
X 11.0 0.80 30 NO
P5
Eco
2)
50°C
Delay
Multizone
Dynamic
Clean
Normally soiled crockery.
Energy-saving program.
X 7.0 0.92 250 Full
P6
Fast Daily 60°C
Delay
Multizone
Normally soiled crockery. X 10.0 1.30 80 Full
P7
Pro Steam
Delay
Multizone
Dynamic
Clean
Program including steam action
dedicated for heavily soiled
crockery, pots and pans. Soaking
or hand pretreatment is no
longer needed.
X 10.0 1.70 180 Full
P8
Hygiene
3)
Delay
Multizone
Dynamic
Clean
Normally or heavily soiled
crockery, with additional
antibacterial wash. Program
interruption (e.g. due to door
opening) can compromise
elimination of germs.
X 13.0 1.50 118 Full
1) Program data obtained in conformity with European standard EN 50242, obtained under normal conditions (without any options) and
may vary depending on conditions. Differences of up to 20 minutes are possible with sensor programs as a result of the appliance’s
automatic calibration system.
2) Reference program for energy label in compliance with EN 50242 regulations. - Note for Testing Institutes: for detailed information
on the EN/Standard loading comparison test and other tests, contact the following address: “nk_customer@whirlpool.com”.
3) The antibacterial action has been tested by the Institut Pasteur of Lille (France), based on the NF EN 13697 standard of November
2001.
Recycling Water System: these programs save water in a dedicated tank.
A Tank Cleaning Cycle (at least 45 min.) is automatically run every 30 cycles or after every power off, to assure the best product
conditions.
Quick reference guide
