6
Options and display description
Before using the appliance for the first time
carefully read this quick reference guide and
the assembly instructions!
The control panel of this dishwasher activates
pushing any button except cancel/off button.
For energy saving the control panel
deactivates automatically after 30 seconds if
no cycle has started.
Program selection button
Push “P” button (repeatedly) until selected
program number is shown on the display (P1...Px)
- see “Table of programs” - next page).
Start/resume button
Push this button to start the selected program: the
indicator lights up and goes off at the end of the
program.
When the door is opened during a washing cycle,
the cycle is temporarily paused: the Start indicator
blinks.
To resume the cycle push Start button and close
the door within 3 seconds.
Cancel/off button
Push this button to switch off the control panel.
If pressed when a program is running it cancels the
program ongoing draining water for 1 minute
(0:01 is shown into the display).
If pressed when the dishwasher is switched off, it
drains any possible liquids from dishwasher
(1 minute process).
Salt indicator
When lit (at the end of the cycle), the salt reservoir
needs to be refilled.
Rinse aid indicator
When lit (at the end of the cycle), the rinse aid
dispenser needs to be refilled.
Wash time display
Indicated the cycle duration and the remaining time
(h:min). With “Delayed start” selected it indicates
the time remaining until program start (h.00) -
below 1h (0:min).
If “Fx Ey” messages appears on the display, see
page 17 - chapter “What to do if...”.
Delayed start button
Push the button (repeatedly) to delay the start of
the program.
Adjustable from 1 to 24 hours. With each press of
the button, the delayed start indicator increases by
one hour and after 24 restarts from 0. Then press
the START button.
The dishwasher will start after the set time.
Tablet setting
This setting allows to optimize the cycle
performances according the type of detergent
used. Push the Tablet button for 3 seconds (until
the indicator lights up) if you are using the
combined detergents in tablet (rinse aid, salt and
deteregent in 1 dose).
If you are using powder detergent or liquid
detergent, the Tablet indicator on the control panel
has to be off.
Multizone
Allows you to choose the washing zones. Press this
button (repeatedly) to select the wash zones:
both racks
only lower rack
only upper rack (including cutlery rack)
- indicator lits
Dynamic clean
Thanks to the additional power jets this option
provides a more intensive and powerful wash in
the lower rack, in the specific area. This option is
recommended for washing pots and casseroles
(see page 14).
Press this button to activate Dynamic Clean (the
indicator lights up).
For non Dynamic Clean loading to achieve best
cleaning performances and resources optimization,
Dynamic Clean should be switched off.
