736638
13
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
13
Pulse hold during training (PULSEHOLD)
Press the PULSE key. The current pulse becomes the target pulse.
The PULSE LED is on. The target pulse is controlled and held by
adjusting the speed and incline (option).
Press the PULSE key or change the SPEED or INCLINE values to
end pulse control.
If pulse recording is interrupted during pulse control the speed
and incline are taken back to the minimum after 60 seconds and
the treadmill is stopped.
TRAINING
During training the SPEED/INCLINE display and
TIME/DISTANCE display alternate every 10 seconds. By selecting
the SPEED/DISTANCE key these can be changed within 10
seconds using the (-/+) keys. The speed can also be changed
directly using the (-/+) keys.
PAUSE IN TRAINING (display of average values)
If the STOP key is pressed during training, the program is inter-
rupted and the pause mode is activated.
If the START key is pressed during the pause mode, the treadmill
restarts and takes up the speed that was activated before the
pause. The training values are counted again and continued from
where they were interrupted.
If the STOP key is pressed again during the pause mode, the aver-
age SPEED and INCLINE values are displayed
DELETION OF DISPLAYS (RESET)
If the STOP key is pressed in the average values display, it is
RESET (deletion of displays).
If the STOP key is pressed for longer this also triggers a RESET.
STAND-BY
The treadmill switches to stand-by mode after 10 minutes of being
idle. The LED above START is on.
The power consumption is under 0.5 watts.
The treadmill can be reactivated by pressing the START key.
Settings (information and input)
Press the SETTINGS key after turning it on. The following infor-
mation is displayed using the - + - key.
Information:
Treadmill name XXXX XXX XXXX
Software version XXXX XXX XXXX
Motor controller version XXXX XXX XXXX
Total distance [km/mi] odo 0 0000
Total time [h] Hour 0 0000
INPUT
Press the INCLINE key
Setting for whether the incline also changes in pulse control in
addition to the speed.
Incl hrc OFF/ON
Press the INCLINE key to change the setting.
Press the SPEED key
Setting for whether the speed or 1000 m time (PACE) is display-
ed under SPEED.
SP.d / PACE
Press the SPEED key to change the setting.
P
ress the PULSE key
Setting for whether beeps are sounded or not.
bu.Z OFF/ON
Press the PULSE key to change the setting.
P
ress the TIME key
Delete the total kilometres and total time.
clr NO/YES
Press the TIME key to change the setting.
Press the DISTANCE key
Setting for whether kilometres or miles are displayed.
EN NO/YES
Press the DISTANCE key to change the setting.
The START key takes over the setting.
The STOP key exits the area.
BLUETOOTH (KETTLER S-FIT APP) Bluetooth
The treadmill can be controlled using the KETTLER S-FIT APP. A BT
connection to a smartphone or tablet is required for this. You can
obtain more information from the KETTLER S-FIT APP. It is availa-
ble for Android devices from "Google play" and for iOS devices
from "iTunes".
ESTABLISHING A CONNECTION (coupling/pairing)
Press the BLUETOOTH key after turning it on. The treadmill's BT
name is sent for 2 minutes. The flashing BT-LED and RUN1 in the
display shows this. If the pairing is successful the LED stays on per-
manently and display goes off. It is not necessary to enter any
codes on the treadmill.
Disconnect
Press the BLUETOOTH key or pull the safety switch. The motor is
stopped.
Operating instructions
You can find more up-to-date operating instructions on our websi-
te www.kettler.net under Sport > SERVICE-CENTER > Computer
instructions.
Errors and service reports
“lubr" is shown in the display after 100 operating hours. You
should lubricate the treadmill now.
GB
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kettler Run 1 - 07888-500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kettler Run 1 - 07888-500 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens als bijlage per email.

De handleiding is 3,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kettler Run 1 - 07888-500

Kettler Run 1 - 07888-500 Installatiehandleiding - Nederlands, Deutsch, English, Français, Italiano, Português, Espanõl, Polski, Dansk - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info