Training functions
Display switchover during the training
Setting: manual
With “PROGRAM”, the display changes in the
points field in the following order: Time / RPM /
Speed / Dist. / Power / Energy / Pulse / (Profile) /
Time ...
Setting: automatically (SCAN)
Setting: automatically (SCAN)
Press the “PROGRAM” key longer until the “SCAN”
symbol appears in the display. Change of the
displays every 5 seconds. The SCAN function is
terminated by renewed pressing of the “PROGRAM”
key, the recovery function or interruption of training.
Interruption or end of training
For less than 10 pedal revolutions/min or pressing
“RECOVERY”, the electronic equipment recognizes
an interruption of the training. The training data
achieved are displayed. Speed, power, revolutions
and pulse are represented as average values with
the Ø symbol.
With “Plus” or “Minus” you can change into the
current display.
E.g. remaining values. The training data are
displayed for 4 minutes. If during this period no key
is pressed and no training takes place, the
electronic equipment switches into the snooze mode
with room temperature display.
Resumption of training
When continuing the training within 4 minutes, the
last values are further counted or counted down.
RECOVERY – Function
Recovery pulse measurement
At the end of training press “RECOVERY”.
The electronic equipment measures your pulse
reversing for 60 seconds.
If you press “RECOVERY”, the current pulse value is
stored under “RPM”; under “SPEED”, the pulse value
after 60 seconds is stored. Under “Power”, the
difference of both values is displayed. From this, a
fitness grade is calculated (for example F 1.1). The
display is ended after 20 seconds.
“RECOVERY” or “RESET” interrupts the function. If at
the beginning or end of the time rewind no pulse is
recorded, an error message is displayed.
SD1B
27
GB
>>>
>>>
>>>
