Volume parameter is in use (F 1), and the 16 Parts
function is enabled (F 10) the Display will appear as
follows: Use key F 1 or F 6 to select the first 4 parts,
with F 2 or F 7 the parts from 5 to 8 and so on throu-
gh to 16.The Volume value is modified using the Value
+ / - keys. When a single part is selected, this beco-
mes black and it may be Muted by pressing key F 10.
To cut out the Mute on the part, simply press key F 10
again while the part is selected.
(The Mute mode is not enabled in the case of the GM
Filter function).
When one of the 16 Parts display is shown, the next
display may be pulled up or the previous display using
the PAGE < > keys.
REMOTE GM LEVEL. Global Volume control for all 16
GM parts of a Module connected to the Midi In 1 of
the instrument. To activate this control, use the two
Page + / - buttons with Volume values ranging from 0
to 16 and only intervene during Song Play with Start inserted.
HOW TO CALL-UP THE INSTRUMENT SOUNDS VIA MIDI
Voices Type Control Change 0 (Bank) Program Change
Voices Bank A Value: 0 1-128
Voices Bank B Value: 1 1-128
User Voices Value: 2 1-128
Flash Card Voices Value: 3 1-128
Grooves (Internal) Value: 4 1-36
Grooves (Flash Card o Simm) Value: 4 113-128
Drawbars Value: 5 1-16
Simm Voices Value: 6 1-128
MSP o Files.Wave Value: 7 1-8
Drum sets (Internal) 1-112
121-124
User Drum set 125-128
Drum sets (Card) Value: 3 113-120
Drum sets (Simm) Value: 6 113-120
Programs 1-128
One touch 1-48
Registrations Value: 0 1-128
Value: 1 1-70
Program: To call-up a Program via Midi, the relative Program change must be sent to the Right
midi channel. To perform this operation the Program key must be lit.
One touch :
To call-up a One touch selection via Midi, the relative Program change must be sent to the
midi channel of the Right section. To perform this operation the One touch key must be lit.
Registration: To call-up a Registration via Midi, the relative Program change must be sent to the
Registration midi channel. The Registration may be called-up even if the key is OFF.
59