683161
190
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
ID Message Description/Corrective Action
0049
The storage location cannot be changed while a PSK QSO log
recording. (ERR: 0049)
Appears when attempting to change the destination for saving the file
while PSK communication log recording is in progress.
004D
Audio files cannot be copied while an audio recording. (ERR:
004D)
Appears when attempting to copy files to a PC or USB while manual
recording is in progress.
004E
Communication log files (CW) cannot be copied while a CW QSO
log recording. (ERR: 004E)
Appears when attempting to copy files to a PC or USB while CW
communication log recording is in progress.
004F
Communication log files (RTTY) cannot be copied while a RTTY
QSO log recording. (ERR: 004F)
Appears when attempting to copy files to a PC or USB while RTTY
communication log recording is in progress.
0050
Communication log files (PSK) cannot be copied while a PSK
QSO log recording. (ERR: 0050)
Appears when attempting to copy files to a PC or USB while PSK
communication log recording is in progress.
0051
KNS log files cannot be copied while a KNS log recording. (ERR:
0051)
Appears when attempting to copy files to a PC or USB while KNS log
recording is in progress.
0055
Audio files cannot be deleted while an audio recording. (ERR:
0055)
Appears when attempting to delete files while manual recording is in
progress.
0056
Communication log files (CW) cannot be deleted while a CW QSO
log recording. (ERR: 0056)
Appears when attempting to delete files while CW communication log
recording is in progress.
0057
Communication log files (RTTY) cannot be deleted while a RTTY
QSO log recording. (ERR: 0057)
Appears when attempting to delete files while RTTY communication log
recording is in progress.
0058
Communication log files (PSK) cannot be deleted while a PSK
QSO log recording. (ERR: 0058)
Appears when attempting to delete files while PSK communication log
recording is in progress.
0059
KNS log file cannot be deleted while a KNS log recording. (ERR:
0059)
Appears when attempting to delete files while KNS log recording is in
progress.
005B
Copying was aborted due to the number of files exceeded 255 in
the destination folder. (ERR: 005B)
Reduce the number of files in UBS flash drive and then copy again.
Appears when the number of files at the copy destination has exceeded
the maximum limit of 255 files while copy is in progress.
005C
The selected file cannot be read because the market code is
different. (ERR: 005C)
The transceiver type does not match the transceiver type that created
the settings data file.
0103
The current sourced from the USB connector exceeds the upper
limit value. (ERR: 0103)
Remove the USB device and then restart the transceiver.
Appears when overcurrent is detected at the USB connector.
Disconnect unused USB devices.
0105
PLL unlock was detected. (ERR: 0105)
Refer to "Troubleshooting" in the instruction manual.
Perform Full Reset. If PLL unlock is still detected after Full Reset, note
down the error message number (ERR:0105) and send an inquiry to
KENWOOD service center.
0107
No reference signal has been detected. (ERR: 0107)
Ensure that the reference signal has been sourced to the REF IN
(10 MHz) connector.
Appears when there is no reference signal input from an external source.
Check whether there is signal input to the REF IN terminal and whether
the level of the signal is high enough.
0109
Corruption of the data was detected. (ERR: 0109)
Executing the Full Reset will initialize the transceiver to the
defaults.
Press [OK] (F) to start the Full Reset.
Appears when damage is found in the backup data.
Press F [OK] to perform Full Reset.
010A to
010F,
0110 to
0115
A DSP error was detected. (ERR: 010A to 010F, 0110 to 0115)
Refer to "Troubleshooting" in the instruction manual.
Perform Full Reset.
If the same error message appears again after Full Reset, note down
the error message number (ERR: 010A to 010F, 0110 to 0115) and send
an inquiry to KENWOOD service center.
0117
A hardware error was detected. (ERR: 0117)
Refer to "Troubleshooting" in the instruction manual.
Perform Full Reset.
If the same error message appears again after Full Reset, note down
the error message number (ERR:0117) and send an inquiry to
KENWOOD service center.
Turn off the power of the regulated DC power supply after “A system error has occurred.” message is displayed.
If error occurs frequently, try updating to the latest firmware. If the same problem persists, this transceiver could be faulty.
Please contact KENWOOD service center.
18 TROUBLESHOOTING
18-10
190

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info