683161
189
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Error Messages
The following error messages are displayed when an abnormality is detected on this transceiver. Follow the steps described for each
error message to resolve the problem.
ID Message Description/Corrective Action
0012
Configurations for the Local Clock have not been completed.
(ERR: 0012)
Associated functions cannot be used until the timer configurations
have been completed.
Appears when attempting to launch the program timer while a local clock
is not configured. Configure the local clock in Clock menus [00] to [03].
0015
Connection to an NTP server has failed. (ERR: 0015)
Ensure that the NTP server address and the network have been
correctly configured.
Appears when date/time data cannot be successfully acquired from the
NTP server.
Follow the instructions in the error message.
001B A file is invalid. (ERR: 001B)
Appears when a file error is detected while reading a file that contains
the RX equalizer, TX equalizer and settings data.
001C
An error occurred while a file was being read from a USB flash
drive. (ERR: 001C)
Appears when a file error is detected while reading a file stored in the
USB flash drive that contains the RX equalizer, TX equalizer and settings
data.
002F
A USB flash drive cannot be detected. (ERR: 002F)
Failure to detect the USB flash drive may be caused by the
following.
The USB flash drive is not correctly connected to a USB
connector.
The USB flash drive is not in the specified format. The USB
flash drive must be formatted in the "USB/File Management"
screen.
Appears when some unknown problem has occurred on the USB flash
drive.
Follow the instructions in the error message.
0030
An error occurred while a file is being written to an internal memory
area or a USB flash drive. (ERR: 0030)
Appears when the file name is duplicated or an unexpected error has
occurred. Follow the instructions in the error message.
003B Failure in Deleting of a File. (ERR: 003B)
Appears when the deletion of file failed. Make sure the USB flash drive
is not write-protected.
003C
Safe Removal of USB Flash Drive was failed. (ERR: 003C)
The data file may not be stored onto the USB flash drive.
Turn OFF the DC power supply, and then disconnect the USB
flash drive.
Appears when some problem has occurred while unmounting the USB
flash drive.
Follow the instructions in the error message.
003E
A failure in detecting the firmware file will terminate the firmware
updating process. (ERR: 003E)
The termination of the firmware update may be caused by the
following:
The firmware file is not stored in the specified folder.
The USB flash drive is not in the specified format.
The USB flash drive must be formatted in the "USB/File
Management" screen.
The newer version firmware has already been applied to the
transceiver.
The firmware file is not legitimate.
Restart the transceiver and then execute the firmware update
again from the beginning.
Appears when some unknown problem has occurred while reading the
firmware file.
Follow the instructions in the error message.
003F
The selected file cannot be read by this transceiver with the earlier
version firmware installed. (ERR: 003F)
Update the transceiver firmware using the latest version of the
firmware.
Appears when attempting to read a settings file written by a transceiver
installed with a new firmware using a transceiver with an old firmware.
Follow the instructions in the error message.
0040
A failure in updating the firmware terminates the firmware updating
process. (ERR: 0040)
Refer to "Troubleshooting" in the instruction manual.
Appears when some unknown problem has occurred while rewriting the
firmware file.
0046
The storage location cannot be changed while an audio recording.
(ERR: 0046)
Appears when attempting to change the destination for saving the file
while manual recording is in progress.
0047
The storage location cannot be changed while a CW QSO log
recording. (ERR: 0047)
Appears when attempting to change the destination for saving the file
while CW communication log recording is in progress.
0048
The storage location cannot be changed while a RTTY QSO log
recording. (ERR: 0048)
Appears when attempting to change the destination for saving the file
while RTTY communication log recording is in progress.
TROUBLESHOOTING 18
18-9
189

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info