683161
177
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Reset
Settings data that are stored on this transceiver can be saved
easily to another data storage media. Also, when overwriting
settings saved in the memory of this transceiver with new settings,
5 types of reset options are available which can be chosen freely
according to the user’s intentions.
Menu Reset:
Resets only the settings configured in the menu.
The settings for TX inhibit, clock menu, LAN menu, advanced
menu, linear amplifier menu, KNS menu, dimmer menu, timer
menu and auto mode are not reset.
Memory Channel Reset:
Resets the settings data of the memory channels and quick
memory channels.
VFO Reset:
Resets only the VFO information.
Standard Reset:
Resets the settings data while partially retaining the settings of this
transceiver.
Full Reset:
Resets all settings to the factory settings.
All image data that are stored in the built-in memory of the
transceiver will be erased after Full Reset.
Data of the memory channels and quick memory
channels, menu data, antenna tuner preset values, auto
mode frequency setting and the different level settings
will not be reset during VFO Reset.
When any of the reset options starts, all the past settings
data will be erased. Thus, make sure to perform reset
after saving the settings to another data storage media.
In Menu [1-06], the default setting for auto voice guide is
configured to OFF. When performing a reset other than
Memory Channel Reset and VFO Reset, the settings in
Menu [1-06] are reset and auto voice guide will not be
output.
The transceiver is reset as follows.
1 Press [MENU].
2 Press F [RESET] to display the Reset screen.
If F [RESET] is not displayed, press F [MORE] to display F
[RESET].
.
3
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select a reset type.
4 Press F4 [SELECT].
A message to confirm the start of the reset process is
displayed.
.
Pressing F7 [CANCEL] clears the reset confirmation
message without starting reset.
5 Press F4 [RESET].
Reset is performed and this transceiver reboots automatically.
When this transceiver cannot be operated properly or the
screen cannot be displayed properly when the power is
turned on, press [A/B] and [CLR] while turning on the
power to perform Full Reset. A “Full Reset in progress”
message is displayed and all settings are reset to the
factory settings.
Firmware Update
There are occasions when the firmware is updated following
additions or enhancements made to the functions.
The latest firmware version can be obtained from the following
website.
http://www.kenwood.com/i/products/info/amateur/
software_download.html
For more details on firmware update, please visit the website.
Firmware Version Check
Check the current firmware version before updating the firmware.
Check in Advanced Menu [27]
Firmware Version
.
If a “firmware update failed” screen constantly appears
while update is in progress, this could be due to system
failure. Please contact KENWOOD service center.
MAINTENANCE AND ADJUSTMENT 17
17 MAINTENANCE AND ADJUSTMENT
17-1
177

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info