683161
98
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Adjusting the Reference Level
Adjust the reference level of the bandscope to make it easier to
distinguish the target signal from the noise.
1 Press F5 [REF.LEV] to display the setting value of
the reference level at the center of the bandscope
screen.
If F5 [REF.LEV] is not displayed, press F1 [MORE] to
display F5 [REF.LEV].
2 Turn the [MULTI/CH] control to adjust the reference
level while observing the spectrum scope
waveform and waterfall color level on the
bandscope screen.
Setting Value -20 to 0 (default) to +10 dB (0.5 dB step)
3 Press F5 [REF.LEV] to end adjustment of the
reference level.
The reference level is slightly compensated for each
span internally on this transceiver so that the view of the
waterfall does not change even when the display
frequency span switches. For this reason, the height of
the waveform on the spectrum scope also changes
gradually when the span switches.
The adjustment value of the reference level is stored for
each amateur band.
Switching the Bandscope Attenuator
If the target signal cannot be identified on the bandscope screen
even after adjusting the reference level due to the excessively high
input signals, attenuate the input level to the bandscope by
switching to a different attenuator for the bandscope.
Press F6 [ATT] to switch to a different attenuator.
If F6 [ATT] is not displayed, press F1 [MORE] to display F6
[ATT].
Pressing F6 [ATT] each time switches the attenuator.
Setting Value Off (default)/ 10 dB/ 20 dB/ 30 dB
Pressing and holding F6 [ATT] each time switches the
options in the reverse sequence.
The current attenuator level setting is displayed at the top of
the bandscope.
“SCP OVF” (scope overflow) may be displayed in the
toolbar of the bandscope screen if the input to the
bandscope becomes excessive. In such cases, press
F6 [ATT] to configure the attenuator for the bandscope
to lower the input level to the bandscope.
Switching the attenuator for the bandscope does not
affect the RX sensitivity.
The setting value of the bandscope attenuator is stored
for each amateur band.
Configuring the Speed of Waterfall Drop
The speed at which the waterfall is flowing can be selected from
the options available.
Press F1 [MORE] followed by F4 [SPEED].
Pressing F4 [SPEED] each time switches the flow speed.
Setting Value Speed1/ Speed2/ Speed3/ Speed4 (default)
After altering the speed, “Speed n” is displayed in the
waterfall area for about 1 second.
Pressing and holding F4 [SPEED] switches the options in
the reverse sequence.
Waterfall Display during Tuning (Center Mode)
This is a function for switching the behavior of the waterfall display
when the frequency is altered in the center mode.
Configure in Menu [8-03] Waterfall when Tuning
(Center Mode)
Setting Value Straight (default)/ Follow
Straight: Pauses the target signal level traces displayed on the
waterfall and moves the traces horizontally across the screen
when the frequency is altered.
Follow: Tracks and displays the latest FFT level at the portion
where the waterfall starts flowing when the frequency is altered.
Reduced Bandscope Display
A small bandscope (with a waterfall display) can be displayed on
screens such as those for the different settings, RTTY
communication and PSK communication.
1
Display the menu, configuration modes except
equalizer configuration and the RTTY/PSK
communication screen.
2
Press [SCP].
A small bandscope is displayed.
.
While the reduced bandscope is displayed, the
horizontally arrayed F keys are switched to the function
keys of the configuration screen and thus the bandscope
settings cannot be changed.
7 SCOPE FUNCTIONS
7-2
98

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info