683161
19
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
.
ACC 2 Connector
Pin No. Pin Name Function Input/Output
NC No connection
2 RTTY RTTY control terminal (FSK key input) I
3 ANO
Audio output
Connect to the audio input of a PC or an external device such as a PC connection interface.
The audio output level is independent of the AF volume control knob on the front panel.
The audio output level can be adjusted in Menu [7-09]. Adjust it to an appropriate level.
When the audio output level is configured to the default value of “50” in Menu [7-09], the peak-to-
peak voltage is approximately 0.5 V p-p in the case of standard modulation signals. Altering the
audio output level between “0” and “100” changes the peak-to-peak voltage level between
approximately 0 Vp-p and 1.2 Vp-p. (Impedance 10 kΩ)
O
4 GND Signal ground
5 PSQ
Squelch control output
Connect to the squelch input of an external device such as a PC connection interface.
When squelch is open: Low impedance
When squelch is closed: High impedance
O
6 MET 1 Meter level output 1 O
7 NC No connection
8 GND Signal ground
9 PKS
PTT input for data communication (DATA SEND)
Connect to the PTT output of an external device such as a PC connection interface.
Signal can be transmitted by connecting the PKS terminal to GND.
The PKS terminal mutes unnecessary modulation input signals during transmission.
Refer to Configuration of the Input Path of TX Audio (8-1).
I
10 MET2 Meter level output 2 O
11 ANI
Audio input for data communication
Connect to the audio output of a PC or an external device such as a PC connection interface.
The audio input level is independent of MIC GAIN on the front panel.
The audio input level can be adjusted in Menu [7-07].
Standard modulation can be obtained with an input of approximately 10 mVrms in the default
setting of “50” in Menu [7-09]. Altering the audio input level between “0” and “100” changes the
standard modulation input level between approximately almost no modulation and approx. 1
mVrms. (Impedance 10 kΩ)
I
12 GND Signal ground
13 SS
PTT input
This is the same terminal as pin 2 (SS terminal) of the MIC connector on the front panel and pin 3
(SS terminal) of the REMOTE connector.
It has the same behavior as pressing [SEND] on the front panel.
Signal can be transmitted by connecting the SS terminal to GND.
The SS terminal mutes unnecessary modulation input signals during transmission.
Refer to Configuration of the Input Path of TX Audio (8-1).
I
INSTALLATION AND CONNECTION 1
1-7
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info