606707
61
Verklein
Vergroot
Pagina terug
1/77
Pagina verder
APRS-16
Note:
When the built-in data band is set to cross band, the Voice Alert function
does not operate.
Voice alert takes precedence even when TONE, CTCSS and DCS are set.
When Voice alert is ON, you cannot perform TONE or CTCSS frequency
selection and DCS code selection.
When the packet speed is 9600 bps, the TONE will disrupt the
demodulation of the packet. Set the packet speed to 1200 bps when using
Voice Alert.
WEATHER STATION DATA OUTPUT
Enter Menu mode and access Menu 615.
Transmit <TX>
This setting determines whether or not to transmit the
meteorological data obtained from the Weather Station, with
the APRS data communication.
Transmit Interval Time <TX INTERVAL>
Set the interval at which the meteorological data is
transmitted with the APRS data communication.
The interval can be set to 5, 10, 30, or 60 minutes.
The following meteorological data is transmitted:
Rainfall
Air temperature
Wind direction
Wind velocity
Atmospheric pressure
Humidity
This data is transmitted with the APRS standard format (latitude/
longitude and time information).
You can verify the meteorological data being output by viewing
MY WEATHER STATION. (Press [F], [WXi])
SETTING AS A DIGIPEATER
DIGIPEAT
Enter Menu mode and access Menu 616.
When using the TM-D710G as a digipeater, set whether or
not you digipeat a packet which includes your callsign in the
packet path.
In the received packet path, if you have set your callsign in
MY CALLSIGN (Menu No. 600), the digipeat completion fl ag
(
) is added to your callsign and will then process the relay.
(For example, “JA1YKX-1” > “JA1YKX-1
”.)
UICHECK
Enter Menu mode and access Menu 617.
This function will not relay a one-time received UI frame within the
set UICHECK time. This is effective for each of UIDIGI, UIFOOD, and
UITRACE.
UI frame (Unnumbered Information frame)
Data can be transferred and the APRS beacon, etc., can be used
without making a connection. UIDIGI, UIFLOOD, and UITRACE are
all specialized UI frame relay processing modes.
UIDIGI
Enter Menu mode and access Menu 618.
When using the TM-D710G as a digipeater, set whether or
not UI digipeat is run.
When receiving a UI frame that matches your entered
character string alias (RELAY, WIDE 1-1, etc.) of the
beginning part of the packet path that has not yet been
digipeated, the digipeat completion fl ag (
) is added to your
callsign (the callsign you set up in MY CALLSIGN) and
the relay will begin processing. (For example “WIDE 1-1” >
“JA1YKX-1
”, etc.)
1 Rotate the Tuning control to switch the function ON, then
press the Tuning control.
2 Rotate the Tuning control to select “ALIASES”, then press
the Tuning control.
The display for entering a path appears; the fi rst digit blinks.
You can enter 0 to 9, A to Z, , (comma), and –.
61

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TM-D710GA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TM-D710GA in de taal/talen: Engels als bijlage per email.

De handleiding is 7,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TM-D710GA

Kenwood TM-D710GA Gebruiksaanwijzing - Nederlands - 75 pagina's

Kenwood TM-D710GA Gebruiksaanwijzing - Nederlands - 55 pagina's

Kenwood TM-D710GA Gebruiksaanwijzing - Deutsch - 74 pagina's

Kenwood TM-D710GA Gebruiksaanwijzing - English - 55 pagina's

Kenwood TM-D710GA Gebruiksaanwijzing - Français - 77 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info