606707
48
Verklein
Vergroot
Pagina terug
1/77
Pagina verder
APRS-3
RECEIVING APRS DATA
Each time a new APRS packet is received, the frequency display
is interrupted to show information as below:
Status text
The received APRS packet may include information on an object
such as a hurricane or tornado. In this case, the name of the object
appears instead of a callsign.
Press [MSG] to send a message to the station.
Press [DETAIL] to access further information.
To restore the frequency display, press [ESC] or just wait for
approximately 10 seconds.
Note:
When you receive an APRS packet including an “EMERGENCY” comment,
a different format of display from the above will appear and a different beep
will sound.
When you receive an APRS position packet that you transmitted, the
frequency display is interrupted and “MY POSITION” will appear on the
display. This could happen when one or more digipeaters are used. (When
setting Menu No. 625 (DISPLAY AREA) to “ENTIRE”, “HALF”, or “OFF”, the
call sign of the digipeater station will not display.)
If you receive a message that you transmitted, “MY MESSAGE” will appear.
You can change the interrupt screen display setting through Menu
No. 625 (DISPLAY AREA). When set to “OFF”, the frequency display
is not interrupted. An indicator such as “dP” appears, depending on
the type of data. Refer to the table for details.
Indicator Meaning
dP Duplicate position comment
nP New position data
oP
Other station position
data (Navitra beacon)
>P Beyond position limit
>F Beyond fi lter type
aM ACK message
dM Duplicate message data
nM New message data
oM To other stations message data
rM Rejected Message
dS Duplicate status text
nS New status
Q?
1
Query
?? Packet that cannot be decoded
dD Duplicated DX cluster data
nD New DX cluster data
1
The transceiver automatically transmits the appropriate information in
approximately 2 minutes after receiving a request.
Note:
The APRS programs for PCs have entry fi elds for a position comment and
status text. The data entered to these two fi elds are transmitted as separate
packets. This transceiver, however, includes both of a position comment and
status text in one packet to transmit.
This transceiver beeps each time it receives any type of APRS packet. You
may access Menu 624 (AUDIO - RX BEEP) to change this setting. The
default is “ALL”.
ACCESSING RECEIVED APRS DATA
This transceiver is capable of receiving and storing APRS data
received from up to 100 stations in memory. You can easily recall
the information of the desired station.
1 Press [KEY], [LIST].
The list of stations appears.
The numbers beside the callsigns indicate the order in which data is
received. The data received last is assigned 1.
[TOP]: Displays the list of the fast 5 stations.
[5
]: Displays the list of the previous 5 stations.
[5
]: Displays the list of the next 5 stations.
[ESC]: Restores the frequency display.
[MSG]: Allows message entry to the current station.
[SORT]: To select the sort function.
[FILTER]: To select the fi lter function.
[TUNE]: Set the QSY frequency (APRS only).
[CLR]: Deletes the current station.
• Press [F].
[POS.RQ]: Request position.
[ALLCLR]: Deletes all stations.
When you press [ALLCLR], “CLEAR ALL?” appears with the
message. Press the Tuning Control to clear all.
2 Rotate the Tuning control to select the desired station using
the cursor (
).
3 Press the Tuning control.
The information of the selected station appears.
[BACK]: Restores the list of stations.
[MSG]: Allows message entry to the current station.
[]: Displays the previous page.
[]: Displays the next page.
[TUNE]: Set the QSY frequency (APRS only).
[CLR]: Deletes the entire information of the current
station.
Note:
When data from the 101st station is received, the oldest data in memory is
replaced by that data.
Each time a new APRS packet is received from the same station, the old
data from that station (in memory) is replaced by new data.
48

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TM-D710GA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TM-D710GA in de taal/talen: Engels als bijlage per email.

De handleiding is 7,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TM-D710GA

Kenwood TM-D710GA Gebruiksaanwijzing - Nederlands - 75 pagina's

Kenwood TM-D710GA Gebruiksaanwijzing - Nederlands - 55 pagina's

Kenwood TM-D710GA Gebruiksaanwijzing - Deutsch - 74 pagina's

Kenwood TM-D710GA Gebruiksaanwijzing - English - 55 pagina's

Kenwood TM-D710GA Gebruiksaanwijzing - Français - 77 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info