606707
47
Verklein
Vergroot
Pagina terug
1/77
Pagina verder
ADJUSTING THE INTERNAL CLOCK
When the internal GPS function is turned ON, the year, month,
day, and time are automatically set from the GPS satellite
information. If the GPS information cannot be received, you can
manually enter the date and time.
Note: The battery for the clock backup is built into the unit. When the power
source is connected, the battery begins to charge. It takes approximately 12
hours to become fully charged.
Setting Date
1 Enter Menu mode and access Menu 925.
The fi rst 2 digits blink.
2 Rotate the Tuning control to enter the current month (TM-
D710GA) or day, then press the Tuning control.
The next 2 digits blink.
3 Rotate the Tuning control to enter the current day (TM-
D710GA) or month, then press the Tuning control.
The last 2 digits blink.
4 Rotate the Tuning control to enter the current year, then
press the Tuning control.
5 Press [ESC] to exit Menu mode.
Note:
When used at room temperature (25°C), the error of the internal clock in a
month is within one minute.
The internal clock is effective until December 31, 2099.
Setting Time
1 Enter Menu mode and access Menu 926.
The fi rst 2 digits blink.
2 Rotate the Tuning control to enter the current hour, then
press the Tuning control.
To set 1 o'clock PM for example, select 13.
The next 2 digits blink.
3 Rotate the Tuning control to enter the current minute,
then press the Tuning control.
4 Press [ESC] to exit Menu mode.
Setting UTC Offset
1 Enter Menu mode and access Menu 927.
2 Rotate the Tuning control to select the appropriate UTC
offset, then press the Tuning control.
The selectable range is from +14:00 to –14:00 in steps of 15
minutes.
3 Press [ESC] to exit Menu mode.
APRS-2
CONNECTING WITH A EXTERNAL GPS RECEIVER OR
WEATHER STATION
The GPS jack on this transceiver accepts a 2.5 mm (1/10")
3-conductor plug. If necessary, use the supplied cable to modify
the cable end of external GPS receiver or Weather Station.
Use an external GPS receiver which conforms to the NMEA-0183
format and is compatible with RS-232C signal polarity output at the
below mentioned levels.
[Low level: –15.0V ~ +0.5 V / High level: +3.0V ~ +15.0V]
You cannot use GPS receivers with USB-type connections.
Set Menu No. 602 (GPS PORT-INPUT) to “GPS” (
external GPS
receiver), “WEATHER (Davis)” (Weather Station), or “WEATHER
(PeetBros.)” (Weather Station), depending on the equipment
connected to the GPS terminal.
When an
external GPS receiver is selected, the “GPS” indicator
appears. When a Weather Station is selected, the “WXI” indicator
appears.
External GPS receiver
To GPS jack
Shield
(to GND on GPS/ WX)
Red
(to DATA OUT on GPS/ WX)
White
(to DATA IN on GPS/ WX)
Weather Station
47

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TM-D710GA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TM-D710GA in de taal/talen: Engels als bijlage per email.

De handleiding is 7,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TM-D710GA

Kenwood TM-D710GA Gebruiksaanwijzing - Nederlands - 75 pagina's

Kenwood TM-D710GA Gebruiksaanwijzing - Nederlands - 55 pagina's

Kenwood TM-D710GA Gebruiksaanwijzing - Deutsch - 74 pagina's

Kenwood TM-D710GA Gebruiksaanwijzing - English - 55 pagina's

Kenwood TM-D710GA Gebruiksaanwijzing - Français - 77 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info