24
4 Permanent settings in programming mode
In the programme item RINSING you can make the following
settings:
U
MANUAL
U
The switch-on rinse must be started manually.
U
AUTOMATIC
U
The switch-on rinse is started automatically.
Example: Proceed as follows to specify that the switch-on rinse
should be started manually.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
RINSE
g T Turn the Rotary Switch until the programme item
RINSING is displayed.
k T Press the Rotary Switch.
AUTOMATIC
g T Turn the Rotary Switch until MANUAL is displayed.
k T Press the Rotary Switch.
OK appears briefly on the display.
RINSING
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
READY
In the programme item RESET you can reset various settings to
their factory settings:
U
PRODUCT
U
The settings (e.g. amount of water and temperature) for any
product can be reset individually to the factory settings.
U
ALL PROD.
U
The settings (e.g. amount of water and temperature) for all
products are reset to the factory settings.
U
RESET.ALL
U
All user settings (apart from the ‘filter’ and ‘water hardness’)
are reset to factory settings. Your IMPRESSA then switches
off.
Example:Proceed as follows to reset the values for 1 espresso to the
factory settings.
Precondition:
READY is displayed.
Rinses
Restore factory settings