22
4 Permanent settings in programming mode
E If you are using the CLARIS Pro Blue filter cartridge and have
activated it, it is not possible to set the water hardness.
The harder the water is, the more frequently the IMPRESSA needs to
be descaled. It is therefore important to set the water hardness accu-
rately.
The water hardness can be adjusted on a continuous scale between
1° dH and 30° dH.
Example: Proceed as follows to change the water hardness from
16°dH to 25°dH.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
RINSE
g T Turn the Rotary Switch until the programme item
HARDNESS is displayed.
k T Press the Rotary Switch.
16°dH
g T Turn the Rotary Switch until 25°dH is displayed.
k T Press the Rotary Switch.
OK appears briefly on the display.
HARDNESS
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
READY
In the programme item ENERGY you can permanently set an
energy-saving mode (Energy Save Mode, E.S.M.
©
):
U
SAVE w
U
Soon after the last preparation, the IMPRESSA stops heating
up. After about 5 minutes the message
ENERGY ON is dis-
played.
U
Before you can prepare a speciality coffee, hot water or
steam, the machine must heat up.
U
SAVE -
U
All speciality coffees as well as hot water and steam can be
prepared without having to wait.
Setting the water
hardness
Energy-saving mode