40
5 Permanent settings in programming mode
E Continue turning the Rotary Switch to switch to the per-
formed descaling and filter change operations.
k T Press the Rotary Switch to enter the programme item.
The number of performed cleaning operations appears on
the display.
E By turning the Rotary Switch, the maintenance status can also
be displayed in addition to the number of performed mainte-
nance programmes. The filled out fields show the mainte-
nance status. Once all fields are filled out, your IMPRESSA will
request the respective maintenance programme.
k T Press the Rotary Switch to exit the programme item.
CLEAN
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit the programme item.
INFO
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
READY
You can change the unit for the amount of water from ‘ml’ to ‘oz’.
Example: Proceed as follows to change the unit for the amount of
water from
ML to OZ.
k T Keep the Rotary Switch pressed until
RINSE appears.
g T Turn the Rotary Switch until
DISPLAY is displayed.
k T Press the Rotary Switch to enter the programme item.
ML
g T Turn the Rotary Switch until OZ is displayed.
k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
DISPLAY
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
READY
Unit for amount of
water
