39
5 Permanent settings in programming mode
i T Touch the Espresso symbol.
OK appears briefly on the display, the settings for ‘Espresso’
are restored to the factory settings.
PRODUCT
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit the programme item.
RESET
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
READY
In the programme item INFO you can query the following infor-
mation:
Z Number of prepared speciality coffees, hot water and steam
Z Maintenance status and number of maintenance programmes
performed (cleaning, descaling, changing the filter)
Z Software version
k T Keep the Rotary Switch pressed until
RINSE appears.
g T Turn the Rotary Switch until
INFO is displayed.
k T Press the Rotary Switch to enter the programme item.
BUTTONS
k T Press the Rotary Switch to enter the programme item.
The total number of the prepared speciality coffees is dis-
played.
E By touching the individual symbols for the speciality coffees,
hot water and steam, the respective number of prepared
products is displayed.
E To query the number of double products prepared, touch the
corresponding symbol for the speciality coffee twice.
E Open the cover of the filler funnel for pre-ground coffee to
query this number.
k T Press the Rotary Switch to exit the programme item.
BUTTONS
g T Turn the Rotary Switch until CLEAN is displayed.
Viewing information
and maintenance
status
