614555
32
Verklein
Vergroot
Pagina terug
1/51
Pagina verder
– 30 –
No. Item Description Setting range Default
Ref.
page
64 Change-over speed of
condensation stitch or
EBT (end back tack)
Initial speed when starting condensation stitch or EBT
0 to 250
(sti/min)
1 7 0
70 Function of soft-down of
presser foot
Presser foot is slowly lowered.
0 : Presser foot is rapidly lowered.
1 : Presser foot is slowly lowered.
0/1
0
39
71 Double reverse feed
stitching function
Effective/ineffective of double reverse feed stitching is changed over.
(Only used when the CP-18 is used.)
0 : Ineffective
1 : Effective
0/1
1
72 Sewing machine startup
selecting function
Current limit at the startup of sewing machine is specied.
0 : Normal (Current limit is applied during startup.)
1 : Rapid (Current limit is not applied during startup.)
0/1
0
73 Retry function This function is used when needle cannot pierce materials .
0 : Retry function is not provided.
1 to 10 : Retry function is provided. (Setting of the needle bar returning
force)
0 to 10
1
39
* 76 One-shot function One-shot operation up to the material end is specied.
0 : One-shot operation is not performed.
1 : One-shot operation is performed.
0/1
0
84 Initial motion suction
time of presser foot
lifting solenoid
Suction motion time of presser foot lifting solenoid
50 to 500
(ms)
2 5 0
39
87 Function of pedal curve
selection
Pedal curve is selected. (Improving pedal inching operation)
Sewing speed
Pedal stroke
2
0
1
0 to 2
0
40
90 Initial motion up stop
function
Automatic UP stop function is set immediately after turning ON the
power.
0 : OFF
1 : ON
0/1
1
40
91 Function of prohibiting
compensation operation
after turning handwheel
by hand
It is effective in combination with the machine head provided with tension
release function.
0 : Tension release function is ineffective.
1 : Tension release function is effective.
0/1
1
92 Function of reducing
speed of reverse feed
stitching at the start of
sewing
Function to reduce speed at the time of completion of reverse feed stitch-
ing at the start of sewing.
0 : Speed is not reduced.
1 : Speed is reduced.
0/1
0
39
93 Function added to nee-
dle up/down compensat-
ing switch
Operation of needle up/down compensating switch is changed after
turning ON the power or thread trimming.
0 : Normal (Needle up/down compensating stitching only)
1 : One stitch compensating stitching is performed only when aforemen-
tioned changeover is made. (Upper stop / upper stop)
0/1
0
40
95 Head selection function Machine head to be used is selected.
(When the machine head is changed, each setting item is changed to the
initial value of the machine head.)
96 Max. sewing speed Max. sewing speed of the sewing machine head can be set. (The MAX
value differs by machine head.)
150 to MAX
(sti/min)
The setting
differs with the
machine head.
40
* 103 Needle cooler output
OFF delay time
Delay time from the stop of sewing machine to the output OFF is speci-
ed using the needle cooler output function.
100 to 2000
(ms)
5 0 0
120 Main shaft reference
angle compensation
Main shaft reference angle is compensated.
–50 to 50
- 1 3
40
121 Up position starting
angle compensation
Angle to detect UP position starting is compensated.
–15 to 15
5
40
122 DOWN position starting
angle compensation
Angle to detect DOWN position starting is compensated.
–15 to 15
0
40
* 150 Correction of the thread
clamp speed at the start
of sewing
Speed correction coefcient for the function of the thread clamp at the
start of sewing is set. 10 to 200
1 0
* 151 Thread clamp ON angle The angle at which the thread clamp is turned ON at the start of sewing
is set.
0 to 359 (°)
2 1 0
* 152 Thread clamp OFF
angle
The angle at which the thread clamp is turned OFF at the start of sewing
is set.
0 to 359 (°)
2 9 0
* 177 Thread clamp AK oper-
ating time
Function for setting the time for turning ON the AK which operates when
the thread clamp is used.
0 to 1000
(ms)
4 2
181 Setting of a target value
for the production sup-
port function
A target value for the sewing counter of the production support function
is set. 0 to 9999
0
* Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the time of
delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated. If it is necessary to
change the set value, please purchase the Engineers Manual and follow the instructions.
32

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Juki DDL8700B-7 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Juki DDL8700B-7 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info