658632
23
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
—23—
C
Change code for VCR
Press any key on the Remote. The VCR now responds to B code
control signals.
To set the Remote and the VCR to transmit and respond to A
code control signals, repeat above procedure as shown above
except press the Number key1” in step
B
of
1
11
1
.
To control two VCRs with the same Remote
You can control two JVC VCRs by switching the remote control
code for the Remote between A and B (
step
A
AA
A
), keeping two
VCRs to different control codes.
To change only the remote control code for the Remote, DO
NOT perform steps
B
BB
B and C
CC
C.
Editing from Camcorder
You can use a camcorder as the playback unit and your VCR as the
recording VCR. Refer also to the camcorder’s instruction manual
for connection and its operations.
A
Make connections
When the JVC camcorder is equipped with the Master Edit
Control, you can control the VCR from the camcorder. Connect
the mini-plug cable (not supplied with this VCR) as illustrated.
If camcorder is monaural, connect the audio output connector
on the camcorder to the left audio input connector on this VCR.
B
Load cassettes
Insert the playback cassette into the camcorder and the cassette to
be recorded on into this VCR.
C
Select input location on this VCR
Select the correct external input location on this VCR.
Select “L-1” —when connecting the camcorder to the audio/video
(or S-video) input connectors on the rear panel.
Select “F-1” —when connecting the camcorder to the audio/video
(or S-video) input connectors on the front panel.
On the VCR
Press CH+/– or push the ADVANCED JOG dial, then turn it to the
left or right until “L-1” or “F-1” appears on the display panel.
On the Remote
Press AUX and/or CH+/– until “L-1” or “F-1” appears on the
display panel.
D
Select video input connector
Select the appropriate mode depending on the connector being
used (
pg. 21).
When using S-VIDEO input connector on the front panel, set
“FRONT AUX INPUT” to “S-VIDEO”.
When using S-VIDEO IN connector on the rear panel, set “REAR
AUX INPUT” to “S-VIDEO”.
When using VIDEO input connector on the front panel, set
“FRONT AUX INPUT” to “VIDEO”.
When using VIDEO IN connector on the rear panel, set “REAR
AUX INPUT” to “VIDEO”.
E
Select edit mode
Set “PICTURE CONTROL” to “EDIT” (
pg. 20).
F
Set AV COMPU-LINK mode
If your JVC camcorder is equipped with a Master Edit Control, set
AV COMPU-LINK” to “OFF” (
pg. 21). The REMOTE PAUSE/
AV COMPULINK connector works as a Remote Pause connector.
G
Start playback
Set the camcorder to its play mode.
NOTE:
If the camcorder is equipped with a superimpose/OSD disable
feature, set it to “OFF” before starting playback.
H
Start recording
On the VCR
Press REC (
7
).
On the Remote
While holding REC (
7
), press PLAY (
4
).
If you are using a Master Edit Control-equipped JVC camcorder,
recording starts automatically on this VCR. (Refer to camcorder’s
instruction manual.)
NOTE:
Be sure to select “AUTO” for “PICTURE CONTROL” (or “NORM”
when “VIDEO CALIBRATION” is set to “OFF”) after you finish
dubbing the tapes. (
pg. 20)
Editing
Various connection for editing tapes
The following three methods can be used for editing tapes.
VHS to S-VHS editing (VIDEO-VIDEO connection):
Although the picture quality is inherently limited by the original
VHS quality, the edited tape has better picture quality than
those made by VHS-to-VHS editing.
S-VHS to VHS editing (VIDEO-VIDEO connection):
Since the original source is recorded in S-VHS mode, the edited
tape has better picture quality than those made by VHS-to-VHS
editing.
S-VHS to S-VHS (S-VIDEO connection):
Original picture quality of S-VHS made can be duplicated with
minimal picture degradation. This is the best editing method
you can use on S-VHS VCRs.
To S-video output
This VCR (for recording)
Camcorder
(for playback)
S-video cable
(supplied)
To AUDIO/VIDEO
input
To S-VIDEO input
Audio/video cable
(supplied)
To audio/video
output
To EDI T
To rear panel
REMOTE PAUSE/
AV COMPULINK
Mini-plug cable
(not supplied)
(JVC camcorder only)
HR-S9911U-EN.fm Page 23 Monday, April 22, 2002 1:34 PM
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC HR-S9911U bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC HR-S9911U in de taal/talen: Engels als bijlage per email.

De handleiding is 3,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info