658632
21
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
—21—
AV COMPU-LINKON/OFF
The REMOTE PAUSE/AV COMPULINK terminal on the rear panel
can be used as either the REMOTE PAUSE terminal or the AV
COMPULINK terminal.
When this function is set to “ON”, you can use this terminal as
the AV COMPULINK terminal. By connecting other JVC’s AV
COMPULINK components, including amplifiers (or receivers)
and televisions, one touch control of the audio and video
components linked via their AV COMPULINK connectors
becomes possible.
When this function is set to “OFF”, you can use this terminal as
the REMOTE PAUSE terminal. If your JVC camcorder is
equipped with the Master Edit Control, you can control the VCR
from the camcorder. Connect the mini-plug cable (not supplied
with this VCR) between the REMOTE PAUSE terminal and the
EDIT connector on the camcorder.
NOTE:
Refer to the other components’ instruction manuals for connection
and its operations.
FRONT AUX INPUT VIDEO/S-VIDEO
You have to select which terminal — either VIDEO (composite) or
S VIDEO (Y/C separate signals) to use as the video input terminal
on the front panel.
Make sure to select the correct terminal; otherwise, you may fail
in recording (editing) on this VCR.
REAR AUX INPUT VIDEO/S-VIDEO
You have to select which terminal — either VIDEO (composite) or
S VIDEO (Y/C separate signals) to use as the video input terminal
on the rear panel.
Make sure you select the correct terminal; otherwise, you may fail
in recording (editing) on this VCR.
Satellite Auto Recording
You can automatically record a satellite program which is timer-
programed on your DBS receiver.
A Connect a DBS receiver to the AUDIO/VIDEO IN or S VIDEO IN
connectors* on the rear panel. You can also connect the cable
box if it has a timer.
* To use these connectors, you have to select which one to use.
(
See above, “REAR AUX INPUT”.)
B Set timer program on DBS receiver using its instruction
manual.
C Load a cassette with the record safety tab intact.
D Press SP/EP (p) to set the tape speed. The selected tape
speed will appear on the TV screen.
E Press REC LINK for more than 2 seconds. The VCR turns off
automatically and enters the Satellite Auto Recording standby
mode and the REC LINK lamp lights. When the DBS receiver
outputs a signal, the VCR starts recording and the REC LINK
lamp blinks. The VCR stops recording and powers off when the
DBS receiver stops outputting a signal.
NOTES:
Be sure not to turn on the DBS receiver before the program starts
broadcasting; otherwise, the VCR will start recording when the
DBS receiver is turned on.
To disengage the Satellite Auto Recording standby mode, press
REC LINK (the REC LINK lamp goes off).
Depending on the type of DBS receiver, Satellite Auto Recording
may not be compatible.
Child Lock
You can disable the VCR operations. While
the VCR is turned on, press and hold
POWER on the Remote
for more than
10 seconds. The VCR turns off, “CL
appears for about 5 seconds on the display
panel.
To release the child lock, press and hold POWER on the Remote
until the VCR turns on.
NOTES:
Pressing TIMER (#) during timer recording, unplugging the AC
power cord or a power outage also releases the child lock.
Even if the child lock function is in use, it is possible to engage
and disengage the timer mode with TIMER (#) on the Remote.
Keep the Remote out of the children’s reach.
Timer recording programs will be performed even if the child
lock function is activated.
JLIP ID Number Setting
The JLIP (Joint Level Interface Protocol) terminal is used to connect
the VCR to a personal computer or similar device. By connecting
through the JLIP terminals, you can control the VCR during editing
and certain other operations, from the connected personal
computer or similar device.
When connecting this VCR to another device using the JLIP
terminals, each device must have a different JLIP ID number.
The JLIP ID number of this VCR is preset to “1” when shipped
from the factory. You can change this number to any other number
between 1 to 99.
NOTE:
For further details on the JLIP system or devices, consult your
nearest JVC dealer.
A Access Main Menu screen, then Initial Set screen
Press MENU on the Remote. Press rt to move the highlight bar
(arrow) to “INITIAL SET”, then press OK or
e.
B Access JLIP ID Number Set screen
Press rt to move the highlight bar
(arrow) to “JLIP ID NO. SET”, then press
OK or
e.
C Set JLIP ID number
Press the appropriate Number keys on the
Remote to enter the desired ID number,
then press OK.
Press MENU to return to normal screen.
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
Set the VCR/TV/CABLE/DBS selector on the Remote to
“VCR”.
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
Set the VCR/TV/CABLE/DBS selector on the Remote to
“VCR”.
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
Set the VCR/TV/CABLE/DBS selector on the Remote to
“VCR”.
Child lock
indicator
HR-S9911U-EN.fm Page 21 Friday, April 26, 2002 11:37 AM
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC HR-S9911U bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC HR-S9911U in de taal/talen: Engels als bijlage per email.

De handleiding is 3,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info