HELI 89
Programmable Mix #3
Programmable Mix #3 is similar to the previous mixes, with the
exception that there are only 3 positions where output values
can be adjusted.
As in the previous mixes, the first channel is considered the
master channel, with the second channel selected as the slave
channel.
This mix can be set in the computer and remain on at all times,
or it can be switched on and off in flight using a number of
different switches.
Programmable Mix #3 uses a high and low mixing value
adjustment, as well as a mixing offset value to redefine the
neutral position of the slave channel.
Programmable Mix #1 & #2
Point number (L, 1, 2, 3, H)
Master channel
Control stick input value
Mix point to be adusted
Slave channel
Channel display
THRO: Throttle
AILE: Aileron
ELEV: Elevator
RUDD: Rudder
GEAR: Channel 5
PIT: Pitch/Aux 1
AUX 2: Aux 2
AUX 3: Aux 3
Mixing value (max
±
100)
Mixing switch type selected (ON, F-NR, F-S12, F-S2)
Mixing value of existing stick postition
4.13 Programmable Mixing 1-3 (Function Mode), cont.
Press the UP and DN keys
simultaneously to enter/exit
the Function Mode
Press the DN and Select keys
simultaneously to access the
Function Mode List Display
Press either + or - key
to select the
Master/Slave channels,
to turn exponential On
or Off, and to select
the Mixing Switch type
Press either CH
key to program the
Master/Slave
channels, or to
move the cursor to
any of the 5 points
(L, 1, 2, 3,H)
Press to reset the
value to the factory
preset at the cursor
