611561
21
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
The bread has run over
- If your bread rises more then normal, you have used too
much yeast. Check if you used the right amount and the right
type of yeast.
- Too much sugar can over-activate the yeast. Use less sugar
and also be careful with dried fruits or honey. Try to add less
water, 10 to 20 ml. Remember that a too small amount of fluid
restrains the yeast.
- The use of very fine grinded flour can also cause the bread
to rise too much. These flours do not need as much yeast as
other types of flours.
The bread is too dry
- Use less flour or add 1 tablespoon of liquid. When the
breadmaker is mixing heavy dough or when it uses
longer kneadingtimes, it is possible that the breadmaker
slightly shakes on the kitchencounter. Make sure that the
breadmaker is placed on a stable surface, not to close near
the edge.
Flat breads
- When you use flour grinded by a mill or whole wheat flour, it is
possible that the top of bread is flat.
- If the bread did not rise at all, check the use by date of the
yeast. Did you forget to add the yeast? If the bread has only
risen a little, check the use by date of the yeast.
- The activation of the yeast is restrained by too cold or too
warm water.
- Checked the used amount of salt. Make sure you did not add
too much.
frequently asked questions
14
Question: Why does the shape and height of the bread differ?
Answer: The shape and height of the bread depend on the
room temperature, the quality and amount of the
ingredients.
Question: Why did the bread not rise?
Answer: Forgot to add the yeast, too small amount of yeast or
old yeast cause the bread not to rise and stay “flat“.
Question: How does the timer work?
Answer: The timer can not be set under 1:23 hours or over
13 hours. The timer needs a minimum off 1 hour
and 23 minutes to finish all necessary processes.
The ingredients can perish when they stay in the
breadmaker over 13 hours without being cooked. For
further explanations, see chapter “How to use the
preset timer“.
Question: Why can I not add extra ingredients to the basic
ingredients?
Answer: To give the dough and/or the bread the right shape
and to let it rise properly, the dried currants and
others should be added later. There is a chance
that the ingredients are being squashed during the
kneading-process. They can stick together and then
they will not be evenly divided in the dough. Add the
extra ingredients only after the first “beep”. You may
not add extra ingredients when you use one of the
fast programs.
Question: Can water be replaced by fresh milk?
Answer: Yes - but not when using the preset timer and use the
same amount of liquids that the recipe states.
Question: I can not get the bread out of the breadpan, what can
I do?
Answer: This can be caused by two problems. The non-
stickcoating of your breadpan is worn out or
the bread has not yet cooled down. If the non-
stickcoating is worn out, we advise you to buy a new
breadpan. To find out what the exact problem is, we
advise the following: as soon as the breadmaker has
finished, take out the breadpan with the bread and let
it cool down for 15 to 20 minutes. Turn the breadpan
upside down and slowly shake out the bread. Leave
the bread to cool for another 15 minutes on a wire
rack before you cut it.
Question: There is a margin on the kneadingblade. What causes
this and how can I prevent this?
Answer: The non-stickcoating at the inside on the kneading
blade is thick, soft and not completely hardened.
The final hardening happens at first operation of
the machine. Because of the pressure, which is
being put on the kneadingblade during kneading, the
non-stickcoating will become thinner and harder,
which causes more space to become between the
kneadingblade and the driveshaft in thebreadpan.
This process will happen in the first few weeks of
operation. This is fully normal.
Question: The kneadingblade remains in the bread after
removing the bread out of the breadpan.Is this
normal?
Answer: It is perfectly normal that the kneadingblade sticks
in the bread. If this would not be the case, there
would be a large hole in the bread after removing it
out of the breadpan. Now the bread will first cool
down and therefore become more solid, before the
kneadingblade is removed. The hole in the bread
will in this case be much smaller. During the first few
operations, it could happen that the kneadingblade
remains in the breadpan, this is because of the
question above.
Question: How can I clean the inside of the breadmaker when
the dough has run over?
Answer: You can clean the inside of the breadmaker with a
ovencleaner. Make sure that you protect the heating
element. You can clean the heating element by letting
the breadmaker, without content, finish a complete
program, once or twice. The heating element will burn
clean.
Question: Because of a diet I am not allowed to eat bread with
sugar. Is it possible to make a sugarfree bread in this
machine?
Answer: Yes, this is possible. You can leave out the sugar from
the basic-recipe. When doing this, you should leave
out the salt from the recipe also.
Question: My bread collapses, when changing from rising to
baking. What is the problem?
Answer: This could be caused by two problems. Either you
have used too much yeast or too much water. In most
cases the problem is caused by too much water. The
recipes in the instruction manual are basic-recipes.
It could happen for example that the flour needs less
water then stated. We advise you to use 10 to 20 ml.
less water. The problem should now be solved.
Question: When I bake a bread with raisins, all the raisins are at
the bottom. What can I do to solve this?
Answer: The dough is probably to compact and cannot divide
the raisins properly. Add 10 to 20 ml of water to the
basic-recipe, causing the dough to be more flexible
and the raisins to divide better amongst the dough.
Please make sure that the raisins themselves are not
English 21
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Inventum BM121 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Inventum BM121 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info