686592
17
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
342
GS
(342GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/22/2019
English
Model SF80220RC-2
220-240 V~, 50 HZ, 250 W, Hmax 5 m Hmin 0.19 m IPX4
Model SF70220RC-2
220-240 V~, 50 HZ, 450 W, Hmax 7.5 m Hmin 0.19 m IPX4
Model SF60220RC-2
220-240 V~, 50 HZ, 550 W, Hmax 7.5 m Hmin 0.19 m IPX4
MAX. WATER TEMPERATURE 35°C
IMPORTANT
SAFETY RULES
Please read, understand, and follow all
instructions carefully before installing
and using this product. Keep for future
reference.
Don’t forget to try these other fine Intex products: pools, pool
accessories, inflatable pools and in-home toys, airbeds and boats
available at fine retailers or visit our website.
Due to a policy of continuous product improvement, Intex reserves
the right to change specifications and appearance, which may
result in updates to the instruction manual without notice.
©2019 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle
Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt
in China.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous
licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen
Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Development Co. Ltd., G.P.O Box 28829, Hong
Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European Union by/Distribué
dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading
B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands
www.intexcorp.com
For illustrative purposes only.
OWNER’S MANUAL
342-*GS-R0-2008
342
GS
SAVE THESE INSTRUCTIONS
(342GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/22/2019
English
Page 2
Warnings.......................................................................... 3
Parts References............................................................. 4-5
Setup Instructions ......................................................... 6-13
Product Specifications................................................... 8
Operating Instructions ................................................... 14-16
Intex Pools Operating Time Table.................................. 17
Non-Intex Pools Operating Time Table..........................
18
Maintenance.................................................................... 19
Long Term Storage.......................................................... 20
Troubleshooting Guide................................................... 21
Common Pool Problems................................................. 22
General Aquatic Safety................................................... 22
Limited Warranty............................................................. 23
TABLE OF CONTENTS
RCD OPERATING INSTRUCTIONS
Plug RCD into power outlet. Press RESET button on the RCD plug.
Indicator should be "ON".
Press TEST button on the RCD plug. Indicator should be "OFF".
Press RESET button for use. Do not use if test fails. Contact a qualified
electrician to determine cause of failure.
RESET
RESET
TEST
TEST RESET
RESET
RESET
TEST
TEST
TEST
342
GS
SAVE THESE INSTRUCTIONS
(342GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/22/2019
English
Page 3
IMPORTANT SAFETY RULES
Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.
READ AND FOLLOW ALL INSTRUCTIONS
WARNING
Always supervise children and those with disabilities.
Children must stay away from this product and electrical cord(s).
• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without
supervision.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved.
Assembly and disassembly by adults only. Cleaning and user maintenance must be performed by an adult above 18
years old who is familiar with the risk of electric shock.
Risk of electric shock. Connect this product only to a grounding type receptacle protected by a ground-fault circuit
interrupter (GFCI) or residual current device (RCD). Contact a qualified electrician if you cannot verify that the
receptacle is protected by a GFCI/RCD. Use a qualified electrician to install the GFCI/RCD, which has a maximum
rate of 30mA.
Always unplug this product from the electrical outlet before removing, cleaning, servicing or making any adjustment to
the product.
• Always unplug the appliance on raining days or if leave it for long time (such as going out for holidays).
• The plug must be accessible after produc t is installed.
Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn mowers, hedge trimmers and
other equipment.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
To reduce the risk of electric shock, do not use extension cords, timers, plug adaptors or converter plugs to connect
unit to electric supply; provide a properly located outlet.
Do not attempt to plug in or unplug this product while standing in water or when your hands are wet.
Keep this product more than 3.5m away from the pool.
Keep the plug of this product more than 4m away from the pool and at a height of 1.2m at least.
Position this product away from the pool, so as to prevent children from climbing on it and accessing the pool.
Do not operate this product when pool is occupied.
This product is for use with storable pools only. Do not use with permanently installed pools. A storable pool is
constructed so that it may be readily disassembled for storage and reassembled to its original configuration.
To reduce the risk of entrapment hazard, never enter the pool if suction strainer component is loose, broken, cracked,
damaged or missing. Replace loose, broken, damaged, cracked or missing suction strainer components immediately.
Never play or swim near suction fittings. Your body or hair may be trapped causing permanent injury or drowning.
To prevent equipment damage and risk of injury, always turn pump off before changing the filter control valve position.
Never operate this product above the maximum working pressure stated on the filter tank.
Hazardous Pressure. Improper tank valve cover assembly could cause the valve cover to blow off and cause serious
injury, property damage or death.
This product is intended to be used only for the purposes described in the manual!
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN PROPERTY DAMAGE, ELECTRIC SHOCK,
ENTANGLEMENT OR OTHER SERIOUS INJURY OR DEATH.
These product warnings, instructions and safety rules provided with the product represent some common risks of water
recreation devices and do not cover all instances of risk and danger. Please use common sense and good judgement
when enjoying any water activity.
342
GS
SAVE THESE INSTRUCTIONS
(342GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/22/2019
English
Page 4
PARTS REFERENCE
Before assembling your product, please take a few minutes to check the contents
and become familiar with all the parts.
NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.
" * ": These parts are not included if this pump was not purchased as part of a pool set. Contact
our Authorized Service Centers to order these parts if needed.
1
5
9
11
2
13
35
20
32
33 34 19
3
6
7
4
12
15
16
17
18
8
10
14
3637
38
19
20
39
21
23 24 25 27
22
23 28 30
21
23 28
21
22
29 31
*
**
23 24
21
22
25 26
*40
22
41
44
42
41
43
342
GS
SAVE THESE INSTRUCTIONS
(342GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/22/2019
English
Page 5
REF. NO. DESCRIPTION QTY. SPARE PART NO.
SF80220RC-2 SF70220RC-2 SF60220RC-2
1 PRESSURE GAUGE 1 11411 11224 11224
2 6-WAY VALVE 1 11378 11496 11496
3 DRAIN OUTLET COVER 1 11131 11131 11131
4 CLAMP 1 11380 11380 11380
5 TANK O-RING 1 11379 11379 11379
6 SAND SHIELD 1 11382 11382 11382
7 CENTER PIPE HUB 1 11815 11813 11814
8 LATERAL 10 11484 --
12 - 11384 11384
9 DRAIN VALVE CAP 1 11456 11456 11456
10 DRAIN VALVE O-RING 1 11385 11385 11385
11 L-SHAPE O-RING 4 11228 11228 11228
12 HOSE WITH NUTS 2 11010 11010 11010
13 SAND FILTER INTERCONNECTING HOSE 1 11820 11388 11535
14 LEAF TRAP NUT 1 11822 11479 11479
15 LEAF TRAP O-RING 1 11824 11232 11232
16 BASKET 1 11821 11260 11260
17 FILTER HOUSING NUT 1 11261 11261 11261
18 L-SHAPE O-RING 1 11412 11412 11412
19
AIR RELEASE VALVE/SEDIMENT RELEASE VALVE
2 10460 10460 10460
20 VALVE O-RING 2 10264 10264 10264
21*
PLUNGER VALVE (HOSE O-RING & STEP WASHER INCLUDED)
2 10747 10747 10747
22* HOSE O-RING 2 10262 10262 10262
23* STEP WASHER 2 10745 10745 10745
24* STRAINER NUT 2 10256 10256 10256
25* FLAT STRAINER RUBBER WASHER 2 10255 10255 10255
26* THREADED STRAINER CONNECTOR 1 10744 10744 10744
27* ADJUSTABLE POOL INLET JET NOZZLE 1 12369 12369 12369
28* ADAPTOR B 2 10722 10722 10722
29* STRAINER CONNECTOR 1 11070 11070 11070
30* POOL INLET JET NOZZLE 1 12364 12364 12364
31* STRAINER GRID 112197 12197 12197
32 SCREW 2 11381 11381 11381
33 PUMP MOTOR & CONTROL 112706GS 12708GS 12710GS
34 PRE-FILTER ASSEMBLY 1 11826 11371 11371
35 LEAF TRAP COVER 1 11823 11480 11480
36 SAND FILTER PUMP MOTOR INLET O-RING 2 11457 11457 11457
37 SAND FILTER PUMP TANK 1 12712 12713 12714
38 SAND FILTER PUMP TANK BASE 1 12716 12717 12718
39 PRE-FILTER HOUSING 1 12100 12099 12099
40* STRAINER GRID 1 12198 12198 12198
41* AIR JET VALVE 1 12363 12363 12363
42* INLET THREADED AIR CONNECTOR 1 12371 12372 12372
43* POOL INLET AIR ADAPTOR 1 12368 12368 12368
44* INLET STRAINER CONNECTOR 1 12365 12365 12365
45* AIR JET VALVE CAP (NOT SHOWN) 1 12373 12373 12373
" * ": These parts are not included if this pump was not purchased as part of a pool set. Contact our
Authorized Service Centers to order these parts if needed.
When ordering parts, be sure to quote the model number and part numbers.
342
GS
SAVE THESE INSTRUCTIONS
(342GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/22/2019
English
Page 6
The strainer grid prevents large objects from jamming and/or damaging the filter pump. If
your pool has an inflatable top ring, install the strainer, nozzle and plunger valve before
inflating the pool liner top ring. The part numbers here onward refer to the parts depicted
in the Parts List section of this manual. To install, do the following:
1. In a counter-clockwise motion unscrew
plunger valve union from the threaded
strainer connector
(26) (see drawing 1).
Be careful not to lose the step rubber
washer
(23). Place the plunger valve on
the ground in a safe place.
2. In a counter-clockwise motion unscrew the
strainer nut
(24) from the threaded
connector
(26). Leave the flat washer (25)
on the connector (26).
3. Install the strainer and plunger valve at the
lower position of pool outlet (marked "+").
From the inside of the pool liner insert the
connector
(26) into one of the pre-cut holes
with the washer remaining on the connector
to be placed against the inside of the liner
wall.
4. Before assembly, lubricate the threads with
a petroleum jelly. With the flat side of the
strainer nut
(24) facing the outside wall of
the liner in a clockwise motion screw the
strainer nut
(24) back onto the threaded
connector
(26) (see drawing 2).
5. Finger tighten the strainer nut (24) onto the
threaded connector
(26).
6. Grasp the plunger valve assembly. Make
sure the step washer (23) is in place.
7. In a clockwise motion screw the plunger
valve union back onto the threaded
connector
(26) (see drawing 3).
8. In a clockwise motion turn the plunger
valve handle to close position. Ensure the
plunger valve is securely closed. This will
prevent water from flowing out during filling
of the pool (see drawing 4).
POOL OUTLET - STRAINER & PLUNGER VALVE SETUP (optional)
2
25 26
INSIDE
LINER WALL
24
1
23
2
1
3
1
2
4
INSIDE
LINER WALL
40
342
GS
SAVE THESE INSTRUCTIONS
(342GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/22/2019
English
Page 7
POOL INLET - NOZZLE & PLUNGER VALVE SETUP (optional)
5
2
1
7
1
2
8
INSIDE
LINER WALL
9
WATER
FLOW
POOL
6
25 42 27
INSIDE LINER
WALL
24
41
1. In a counter-clockwise motion unscrew plunger valve
union from the inlet threaded air connector (42) (see
drawing 5). Be careful not to lose the step rubber
washer
(23). Place the plunger valve on the ground in
a safe place.
2. In a counter-clockwise motion unscrew the strainer
nut
(24) from the inlet threaded air connector (42).
Leave the flat washer (25) on the connector (42).
3. Install the nozzle and plunger valve at the upper
position of pool inlet. From the inside of the pool liner
insert the nozzle union (27 & 42) into one of the
pre-cut holes with the washer remaining on the
connector to be placed against the inside of the liner
wall.
4. Before assembly, lubricate the threads with a
petroleum jelly. Then, with the flat side of the
strainer nut
(24) facing the outside wall of the liner
in a clockwise motion screw the strainer nut (24)
back onto the inlet threaded air connector (42) (see
drawing 6).
5. Finger tighten the adjustable pool inlet jet nozzle (27)
and the strainer nut (24) onto the inlet threaded air
connector (42).
6. Grasp the plunger valve assembly. Make sure the
step washer
(23) is in place.
7. Screw the air jet valve (41) over the inlet threaded air
connector
(42). NOTE: Make sure the air jet valve
is securely tighten and facing up. In a clockwise
motion screw the plunger valve union back onto the
inlet threaded air connector (42) (see drawing 7).
8. In a clockwise motion turn the plunger valve handle
to close position. Ensure the plunger valve is securely
closed. This will prevent water from flowing out during
filling of the pool (see drawing 8).
9. Adjust the direction of nozzle head pointing away
from the pool outlet for a better circulation result
(see drawing 9).
10. The pool liner is now ready to fill with water. Consult
the above-ground-pool owner’s manual for filling
instructions.
342
GS
SAVE THESE INSTRUCTIONS
(342GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/22/2019
English
Page 8
PRODUCT SPECIFICATIONS
SETUP INSTRUCTIONS
The sand filter removes suspended particles but does not sanitize your pool. Pool chemistry
is a specialized area and you should consult your local pool service specialist for details
.
TOOLS REQUIRED: One (1) Phillips screwdriver
Pump location and mounting:
The system must be installed on a solid level and vibration-free base.
Provide a location protected from the weather, moisture, flooding and freezing
temperature.
Provide adequate access, space and lighting for routine maintenance.
Pump motor requires free circulation of air for cooling. Do not install the pump in a
damp or non-ventilated location.
A team of 2 or more people is recommended for setting up this product.
The appliance is intended only for household use.
Motor pre-filtering assembly setup:
1. Remove the sand filter and its accessories from the packaging carefully and inspect for any
visible damage.
2. In a counter-clockwise motion unscrew the leaf trap cover (35) from the pre-filter housing.
Take out the basket (16) and filter housing nut (17) (see drawing 10).
3. Connect the pre-filter housing to the motor water inlet. Note: Align the connector in the
pre-filter housing with the water inlet on the motor (see drawing 11).
11
10
35
17
16
14
Model: SF80220RC-2 SF70220RC-2 SF60220RC-2
Power: 220-240 Volt AC 220-240 Volt AC 220-240 Volt AC
Wattage: 250 W 450 W 550 W
Maximum working pressure:
2 bar (30 psi) 2 bar (30 psi) 2 bar (30 psi)
Effective filtering area: 0.07 m2 (0.79 ft2) 0.1 m2 (1.07 ft2) 0.13 m2 (1.44 ft2)
Pump flow rate (at pump
outlet): 7.9 m3/h (2100 GPH) 10.5 m3/h (2800 GPH) 12 m3/h (3200 GPH)
Recommended filtering
media quantity:
No. 20 silica sand
23 Kg (50 Lbs) or glass
sand 16 Kg (35 Lbs).
No. 20 silica sand
35 Kg (77 Lbs) or glass
sand 25 Kg (55 Lbs).
No. 20 silica sand
55 Kg (120 Lbs) or glass
sand 38 Kg (85 Lbs).
Recommended filtering
media (Not included): No. 20 silica sand or glass sand. Particle size range 0.45 to 0.85
mm (0.018 to 0.033 inches). Uniformity Coefficient less than 1.75.
Limited Warranty: see “Limited Warranty”
342
GS
SAVE THESE INSTRUCTIONS
(342GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/22/2019
English
Page 9
4. In a clockwise motion screw filter housing nut (17) onto the motor water inlet (see
drawings 12.1 & 12.2).
5. Replace the basket (16) and leaf trap cover (35) back to the pre-filter housing (see
drawings 13.1 & 13.2).
SETUP INSTRUCTIONS (continued)
Sand tank installation:
1. Place the tank support base at the selected location.
2. Place the tank on the tank support base (see drawing 14.1).
3. Connect the motor pre-filtering assembly unit to the tank support base (see drawing 14.2).
NOTE: Ensure the pre-filter housing water inlet hose connection is facing towards the pool.
IMPORTANT: Some countries, especially in the European community, require the
product to be secured to the ground or to a base in a permanent upright position.
Check your local authorities to determine if there is a regulation in your area
regarding above-the-ground swimming pool filter-pumps. If yes, then the product
can be mounted to a platform using the two holes located in the base.
See drawing 14.3.
The product can be mounted on a cement base or onto a wooden platform to
prevent accidental falling over.
The mounting holes are 6.4 mm in diameter and spaced 210 mm for model
SF80220RC-2 (spaced 224 mm for model SF70220RC-2 & SF60220RC-2) apart.
Use two bolts and lock nuts with a maximum of 6.4 mm in diameter.
13.1 13.2
12.1
17
12.2
17
14
16
35
19
14.1 14.2 14.3
Model SF80220RC-2: 210 mm
Model SF70220RC-2 & 60220RC-2: 224 mm
342
GS
SAVE THESE INSTRUCTIONS
(342GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/22/2019
English
Page 10
SETUP INSTRUCTIONS (continued)
Sand loading:
IMPORTANT: Use No. 20 silica sand or glass sand with particle size range 0.45 to 0.85 mm
(0.018 to 0.033 inches) and a Uniformity Coefficient less than 1.75.
Only use the filter media specified by the manufacturer.
NOTE: Before loading the tank with sand, ensure the center pipe hub assembly is
securely in place at the bottom of the tank, and vertically centered inside the tank.
1. Place the sand shield (6) over the top of the center pipe. Pour the sand into the tank at
a slow rate (see drawing 15).
2. Fill the tank approximately half way, remove the sand shield (6) from the top (see
drawing 16).
3. Evenly distribute the sand inside the tank, then fill the tank with some water to provide a
cushioning effect when the remaining sand is poured in. This prevents the center pipe
hub
(7) from excessive shock (see drawing 17). Place the sand shield (6) back and
continue to pour the sand into the tank.
4. Sand shall be filled between the “MAX” and “MIN” marked gauge on the center pipe (see
drawings18).
5. Remove the sand shield (6) (see drawing 16) and evenly spread and level out the sand by
hand
(see drawing 17).
6. Wash away all sand around the top edge of the tank.
15
6
16
6
MAX
MIN
17
7
MAX
MAX
MIN
MIN
MAX
MIN
18
7
342
GS
SAVE THESE INSTRUCTIONS
(342GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/22/2019
English
Page 17
INTEX POOLS OPERATING TIME TABLE (WITHOUT INTEX SALTWATER SYSTEM)
This table shows the required operating time for average use of the sand filter pump with above
ground pools.
If the system is attached to an “Intex Saltwater System” unit, the filter pump running time
should be longer than the required operating time of the Intex Saltwater System unit.
Pool Size
Water Capacity (Calculated at
90% for Frame Pool and 80% for
Easy Set & Oval Pool)
Sand filter pump operating
time (For one cycle) /
(Hours)
(Gals) (Liters)
SF80220RC-2 SF70220RC-2 SF60220RC-2
INTEX ABOVE GROUND POOLS (AGP’s)
EASY SET®
POOL
457cmx84cm (15'x33") 2587 9792 2 - -
457cmx91cm (15'x36") 2822 10681 2 - -
457cmx107cm (15'x42") 3284 12430 2 - -
457cmx122cm (15'x48") 3736 14141 3 - -
488cmx107cm (16'x42") 3754 14209 3--
488cmx122cm (16'x48") 4273 16173 3 - -
488cmx132cm (16'x52") 4614 17464 3--
549cmx107cm (18'x42") 4786 18115 3 3 2
549cmx122cm (18'x48") 5455 20647 4 3 3
ROUND
METAL
FRAME POOL
457cmx91cm (15'x36") 3282 12422 2 - -
457cmx107cm (15'x42") 3861 14614 3--
457cmx122cm (15'x48") 4440 16805 3--
488cmx122cm (16'x48") 5061 19156 4 - -
549cmx122cm (18'x48") 6423 24311 5 3 3
640cmx132cm (21'x52") 9533 36082 6 5 4
732cmx132cm (24'x52") 12481 47241 8 6 6
ULTRA FRAME
POOL
488cmx122cm (16'x48") 5061 19156 4 - -
549cmx122cm (18'x48") 6423 24311 5 3 3
549cmx132cm (18'x52") 6981 26423 543
610cmx122cm (20'x48") 7947 30079 544
671cmx132cm (22'x52") 10472 39637 7 5 5
732cmx132cm (24'x52") 12481 47241 8 6 6
792cmx132cm (26'x52") 14667 55515 10 7 7
GRAPHITE GRAY
PANEL POOL
SET™
478cmx124cm (15'8"x49") 4440 16805 3--
508cmx124cm (16'8"x49") 5061 19156 4 3 3
569cmx135cm (18'8"x53") 6981 26423 5 4 3
OVAL FRAME
POOL
305cmx549cmx107cm (10'x18'x42")
2885 10920 2 - -
366cmx610cmx122cm (12'x20'x48")
4393 16628 3 2 2
RECT. ULTRA
FRAME POOL
274cmx457cmx122cm (9'x15'x48")
3484 13187 3 2 2
274cmx549cmx132cm (9'x18'x52")
4545 17203 332
305cmx610cmx132cm (10'x20'x52")
5835 22085 4 3 3
366cmx732cmx132cm (12'x24'x52")
8403 31805 6 4 4
488cmx975cmx132cm (16'x32'x52")
14364 54368 976
NOTE: The timer setting has an additional 10 minutes over the actual setting.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Intex-SF80220RC-2
  • Mijn pomp start niet. Er komt 8.8.op
    Weet iemand het probleem? Gesteld op 4-3-2025 om 17:50

    Reageer op deze vraag Misbruik melden
  • als ik de pomp aansluit krijg ik wel pieptonen te horen maar de led licht niet op, en de pomp werkt niet? Gesteld op 8-8-2020 om 12:25

    Reageer op deze vraag Misbruik melden
  • Hier vandaag ook het zelfde en nergens iets te vinden om het te resetten.
    Geantwoord op 28-7-2024 om 17:05

    Waardeer dit antwoord Misbruik melden
  • Hallo, ik heb filterpomp sf80220rc-2 en heb die ingesteld op 12 uur pompen. Na 12 uur schakelt hij zelf uit. Gaat hij dan automatisch weer aan na 12 uur of moet je hem handmatig weer aanzetten? Achter de pomp heb ik een zoutwatersysteem staan en deze schakelt na 7 uur uit. Gaat deze ook weer automatisch aan of moet dit ook handmatig? Ik kom er niet goed uit met de handleiding. Ik hoor graag iets Gesteld op 27-6-2020 om 15:11

    Reageer op deze vraag Misbruik melden
    • De pomp hervat op hetzelfde tijdstip een dag later.
      Je kan de activiteitsduur veranderen ...
      PS. In de gebruikershandleiding (nederlands) betekent "pijltje links" en "pijltje rechts", druktoets links en druktoets rechts. Geantwoord op 27-6-2020 om 20:18

      Waardeer dit antwoord (3) Misbruik melden
  • Ik bezit een filterpomp SF80220RC-2. De duur van het filteren staat op 1 uur (geactiveerd bij de installatie).
    Ik zou de duur willen wijzigen, doch dit lukt niet met gebruik van de handleiding. Er wordt daarin gesproken over een "pijltje links" of een "pijltje rechts", wat ik niet vind.
    Wie kan helpen? Gesteld op 8-5-2020 om 17:18

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Intex SF80220RC-2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Intex SF80220RC-2 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Intex SF80220RC-2

Intex SF80220RC-2 Gebruiksaanwijzing - Nederlands - 24 pagina's

Intex SF80220RC-2 Gebruiksaanwijzing - Deutsch - 23 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info