738437
14
Verklein
Vergroot
Pagina terug
1/33
Pagina verder
TABLE OF CONTENTS
BEFORE YOU BEGIN 1
IMPORTANT SAFETY NOTICE 2
CONTENTS OF PACKAGING 3
LABEL PLACEMENT 4
HARDWARE PACK 5
ASSEMBLY INSTRUCTIONS 6-15
PRODUCT FEATURES 16-17
COMPUTER OPERATION GUIDELINE 18-22
PARTS LIST 23-25
ALTERNATE PLUG PART NUMBERS 26
EXPLODED DIAGRAMS 27-29
WARRANTY 30-31
BEFORE YOU BEGIN
Thank you for selecting the INSPIRE CS2 CARDIOSTRIDER. For your safety and
benefit, read this manual carefully before using the machine. As a manufacturer, we are
committed to providing you complete customer satisfaction. If you have any questions, or
find there are missing or damaged parts, please call our TOLL-FREE customer service
number. Our Customer Service Agents will provide immediate assistance to you.
1
HEALTH IN MOTION, LLC.
255 AIRPORT CIRCLE, SUITE 101
CORONA, CA 92880
Toll-Free Customer Service Number
1-877-738-1729
Mon. - Fri. 8 a.m. - 5 p.m. PST
www.inspirefitness.com
PRECAUTIONS
IMPORTANT SAFETY NOTICE
This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a
piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine.
In particular, note the following safety precautions:
Keep children and pets away from the machine at all times. DO NOT leave
children unattended in the same room with the machine. The linkages on
this machine can cause serious injury or death if used improperly.
Engage Child Safety Lock, detailed in this manual, after each use.
Never place your hands or feet in the path of the linkages because injury may
occur to you or damage may occur to the equipment. Never allow children to
come near or approach the moving linkages while in use.
If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms, STOP the workout at once. CONSULT A PHYSICIAN
IMMEDIATELY.
Position the machine on a clear, leveled surface.
DO NOT use the machine near water or outdoors.
Keep hands away from all moving parts.
Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the machine. Running or
aerobic shoes are also required when using the machine.
Use the machine only for its intended use as described in this manual. DO NOT
use attachments not recommended by the manufacturer.
Do not place any sharp object around the machine.
Disabled persons should not use the machine without a qualified person or
physician in attendance.
Before using the machine to exercise, always do stretching exercises to properly
warm up.
Never operate the machine if the machine is not functioning properly.
Maximum user weight 300 lbs.
Allow 24” (61 cm) of space on each side of the unit. Never place body parts
under pivot area (directly behind pedal).
Ensure that all pull pins, locks, and safety latches are fully engaged before use.
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR
PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE
OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL
INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. NEITHER HEALTH IN
MOTION, LLC. NOR FG1, LLC. ASSUMES ANY RESPONSIBILITY FOR PERSONAL
INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS
PRODUCT.
2
CARE AND MAINTENANCE
1. Keep seat slider clean
2. Inspect and tighten all parts before using the machine.
3. The Frame and Seat Pad of the machine can be cleaned using a damp cloth and mild
non-abrasive detergent. DO NOT USE SOLVENTS.
CONTENTS OF PACKAGING
3
WARNING/PATENT LABEL PLACEMENT
The warning and patent labels have been placed on the unit in location shown. If the labels are missing or
illegible, please call customer service at 1-877-738-1729 for replacements. Apply the labels in location
shown.
4
HARDWARE PACK
NOTE: The following parts are not drawn to scale. Please use your own ruler or scale to measure the size.
5
STEP 1: FRAME STABILIZER ASSEMBLY (See Step 1 Figure)
Installing Stabilizers
A.) Carefully unpack contents of box leaving the 3 large styrofoam frame support blocks
in place.
B.) Remove large styrofoam support from REAR portion of frame.
The Rear Stabilizer mounting bracket should now be exposed.
C.) Place (#28) Rear Stabilizer underneath the Rear Mounting Bracket.
Ensure that the transport wheels are facing away from the unit.
D.) Attach the (#28) Rear Stabilizer to the frame as shown in FIGURE 1 with:
2 x (#27) M8x 70 Carriage Bolts 2x (#29) Curved Washers
2 x (#30) Acorn Nuts
E.) Remove large styrofoam support from FRONT portion of frame.
The Front Stabilizer mounting bracket should now be exposed.
F.) Place (#62) Front Stabilizer underneath the Front Mounting Bracket.
G.) Attach (#62) Front Stabilizer to the frame as shown in FIGURE 1 with:
2 x (#27) M8x 70 Carriage Bolts 2x (#29) Curved Washers
1 x (#30) Acorn Nuts 1x (#36) Child Safety Lock
NOTE:
(#36) Child Safety Lock is used instead of a
nut on USER left side of the Front Stabilizer.
Required Hardware: STEP 1
4x (#27) M8x 70 Carriage Bolts
3x (#30) Acorn Nut
4x (#29) Curved Washer
1x (#36) Child Safety Lock
Required Parts:
(#28) Rear Stabilizer Tube
(#62) Front Stabilizer Tube
STEP 2: SWING ARM ASSEMBLY (See Step 2 Figure)
A.) Slide (#47) Swing Arm Assembly R over the pivot shaft of main frame,
as shown in Step 2. NOTE: Lift spacer between bearings to allow insertion.
B.) Secure using:
1x (#20) Aluminum End Cap 1x (#26) Flat Head Socket Screw
As seen in Step 2 Figure
C.) Place the (#47) Swing Arm Assembly R on top of a styrofoam support block, so
the swing arm doesn’t touch the floor.
D.) Slide the (#85) Pedal Arm that is already attached to unit, into the (#47) Swing
Arm Assembly R
E.) Secure using:
6x (#29) Curved Washers 6x (#31) M8 * 17 Hex Screw
6x (# 32) Spring Washer
As seen in Step 2 Figure
F.) Slide (#54) Swing Arm Assembly L over the pivot shaft of main frame as shown in Figure 2.
G.) Secure using:
1x (#20) Aluminum End Cap 1x (#26) Flat Head Socket Screw
As seen in Figure 2
H.) Place the (#54) Swing Arm Assembly L on top of the styrofoam support block
with the red dot, so the swing arm doesn’t touch the floor.
I.) Slide the (#85) Pedal Arm that is already attached to unit, into the (#54) Swing
Arm Assembly L
J.) Secure using:
6x (#29) Curved Washers 6x (#31) M8 * 17 Hex Screw
6x (# 32) Spring Washer
Required Hardware: STEP 2
2x
12x
12x
(#20) Aluminum End Cap
(#29) Curved Washer
(#32) Spring Washer
2x (#26) Flat Head Socket Screw
12x (#31) M8 * 17 Hex Screw
Required Parts
(#47) Swing Arm Assembly R
(#54) Swing Arm Assembly L
HANDLE ASSEMBLY (See Step 2 Figure)
A) Loosen handle adjustment knob 2-3 turns. This will allow the arm to slide in.
B.) Slide the Right Handle Assembly (#21) into the (#47) Swing Arm Assembly R.
Adjust to desired position and tighten.
WARNING: Check to make sure the Right Handle Assembly has an “R” Sticker on
it. Accidental switching of the Right and Left Handle Assemblies can result in
serious injury.
C.) Loosen handle adjustment knob 2-3 turns. This will allow the arm to slide in.
D.) Slide the Left Handle Assembly (#42) into the Left Swing Arm Sleeve (#54). Adjust to
desired position and tighten.
WARNING: Check to make sure the Left Handle Assembly has an “L” Sticker on it.
Accidental switching of the Right and Left Handle Assemblies can result in serious
injury.
STEP 3: ASSEMBLING THE SEAT BACK & SEAT (See FIGURE 3)
Required Hardware: Step 3
1x (# 86) Hex Bolt 5x (#33) Flat Washer
1x (#24) Lock Nut 4x (#31) M8 * 17 Hex Screw
4x (#32) Spring Washers
Required Parts:
(# 50) Seat Back Assembly (#35) Seat Pad, Charcoal
Installing Seat Back Assembly
A.) Assemble Seatback Assembly (#50) onto Seat Slider Assembly.
Align lower hole and secure using:
1x (#24) Lock Nut 1x (#33) Flat Washer
1x (#86) Hex Bolt
Installing Seat
B.) Secure (#35) Seat to Seat Slider Assembly using:
4x (#31) M8 * 17 Hex Screw 4x (#33) Flat Washer
4x (#32) Spring Washers
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Inspire CS2.5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Inspire CS2.5 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info