768080
22
Verklein
Vergroot
Pagina terug
1/108
Pagina verder
2222
EN
HUGGY ISOFIX BASE
Install the Huggy Isox base on board of the car referring to
the dedicated manual.
g. 25 Install the Huggy Multix car seat on the Huggy
Isox base until hearing on both sides the CLICK signalling
the occurred hooking.
g. 26 The correct hooking of the Huggy Multix car seat
occurs when the proper indicators (I1) from RED become
GREEN. Make sure that the seat is properly hooked, trying to
lift it.
CAUTION: if the base Isox connectors (I2) are not duly
hooked, the Inglesina Huggy car system does not allow
the correct installation of the Huggy Multix car seat on
the base, as a consequence do not force the hooking.
g. 27 After having hooked the Huggy Multix car seat
on the base, press the two buttons (H2) simultaneously and
rotate the handle of the seat to the most forward position.
Make sure that the two buttons (H2) completely come out,
after having arranged the handle to the proper position.
g. 28 Act on the release lever (I3) to release the rst
blocking device of the car base. Then, push the base with
the seat against the car seat until it leans completely on the
same.
g. 29 Verify once again that the Inglesina Huggy car
system is properly hooked.
REMOVAL OF THE HUGGY ISOFIX BASE
g. 30 Rotate the seat handle to the vertical position and,
by acting on the rear lever (H7), lift it from the Huggy Isox
base by holding it from the handle.
USE WITH INGLESINA EASY CLIP FRAMES
g. 31 (COMFORT / OTUTTO / DOMINO frames).
For the correct use of the Inglesina Easy Clip frames, refer to
the dedicated manuals.
g. 32 Properly open the frame, following the suitable
instructions. Holding the Huggy Multix car seat by the
handle, place it on the frame on the central pin making sure
that the brakes are always properly engaged and that there
is not any carrycot or seat unit installed. Then, push the seat
unit downwards until hearing both CLICK sounds indicating
the occurred hooking.
CAUTION: always make sure that the seat unit is properly
hooked before use.
g. 33 To remove the seat unit, act on the rear lever (H7)
and simultaneously lift it holding it by the handle.
USE WITH INGLESINA EASY CLIP STROLLERS
g. 34 (ZIPPY STRIPTEASE/FREE – AVIO Strollers).
For the correct use of the Inglesina Easy Clip strollers, refer to
the dedicated manuals.
In the versions with removable seat unit, it is possible to hook
the seat unit directly on the frame, after having removed the
backrest properly.
Zippy ST/Free: remove the stabilizing supports and/or
armrest top covers, if any, following the suitable instructions.
Avio: hook the dedicated adapters, following the suitable
instructions.
g. 35 Make sure that the brakes are properly engaged.
Holding the Huggy Multix car seat by the handle, hook it
to the stroller on the central pin. Then, push the seat unit
downwards until hearing both CLICK sounds indicating the
occurred hooking.
CAUTION: always make sure that the seat unit is properly
hooked before use. Place the seat unit always facing the
mum.
g. 36 To remove the seat unit, act on the rear lever (H7)
and simultaneously lift it holding it by the handle.
T
T
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Inglesina Huggy Multifix bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Inglesina Huggy Multifix in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks als bijlage per email.

De handleiding is 2,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info