768080
21
Verklein
Vergroot
Pagina terug
1/108
Pagina verder
2121
EN
f
HUGGY MULTIFIX CAR SEAT
g. 1
H1 Handle
H2 Handle adjustment buttons
H3 Belt release red button
H4 Reducer
H5 Hood
H6 Rear belt guide
H7 Rear release lever
HUGGY SHP BASE
g. 2
HUGGY ISOFIX BASE
g. 3
I1 Red/green indicators for base hooking on the car seat
I2 Isox connectors
I3 Release lever
HANDLE ADJUSTMENT
g. 4 To adjust the seat unit handle (H1), press
simultaneously the two buttons (H2) and rotate it to the
wished position. Make sure that the two buttons (H2)
completely come out, after having arranged the handle to
the proper position.
g. 5 The handle of the seat unit can be adjusted to 4
dierent positions:
a) transport
b) intermediate
c) stability
d) car
To obtain the ”car conguration, rotate the handle to the
most forward position.
ADJUSTMENT OF THE SAFETY BELTS
g. 6 Loosen the safety belts by pressing on the regulator
(A) and simultaneously pull them towards the internal side of
the seat unit. Place the child in the seat unit with the back
and legs completely in contact with the seat unit.
g. 7 Verify that the safety belts are inserted in the
eyelets at the height of the shoulders (B) or immediately
above.
g. 8 If the position is not correct, extract the belts from
the rear side of the seat unit and reinsert them in the second
pair of eyelets; always use eyelets at the same height.
g. 9 Overlap the two ending parts (C) and insert them
in the buckle (D) until hearing the blocking CLICK. Verify the
correct closing by pulling the ends of the belts.
g. 10 Let the belts adhere to the child’s body, by pulling
its end on the regulator (A). A nger should not pass between
the belts and the child’s body. To loosen the same, see Fig. 6.
g. 11 To release the belts, press the red button (H3).
USE OF THE REDUCER
g. 12 The seat unit is equipped with a reducer (H4) to
be used for children up to about 3 months of age. When the
reducer is used, make sure that the belts are positioned in the
lowest eyelets of the backrest.
USE OF THE HOOD
g. 13 The seat unit is equipped with an adjustable hood
(H5). To hook it, insert the end (E) in the proper opening (F)
and let the fabric rear side adhere to the seat unit backrest. To
adjust it, simply accompany it to the wished position.
To remove the hood (H5), extract it rmly from the structure.
CAUTION: the hood shall not be used to lift the seat unit:
hazard of detachment.
CARE AND MAINTENANCE
It is recommended to remove the lining periodically to
provide for its correct maintenance.
g. 14 Bring the handle (H1) to the most rear position;
detach the lining from the structure by releasing the upper
(G) and lower (H) hooks from their seats.
g. 15 Extract the protections from the belts.
g. 16 Extract the belts from the suitable eyelets and,
then, remove the entire lining.
INSTALLATION ON BOARD WITHOUT BASE
Verify that on the seat of the car there are not any items that
may hinder the correct leaning of the Huggy Multix car seat.
Verify that the backrest is in vertical position and the seat
where the seat unit has to be installed is NOT EQUIPPED
WITH FRONT AIRBAG.
Install the Inglesina car system only IN THE OPPOSITE
DIRECTION TO THE DRIVING ONE.
g. 17 Rotate the handle (H1) to the most forward
position. Make sure that the two buttons (H2) completely
come out, after having arranged the handle to the proper
position.
g. 18 Pass the lower segment (K) of the car safety belt
through the lateral seats (I).
g. 19 Hook the car safety belt properly.
g. 20 Pass the diagonal segment (L) of the car safety belt
through the rear guide (H6).
CAUTION: make sure that the safety belts are well
stretched and not twisted. Only in this way it is possible
to obtain the perfect anchoring of the Inglesina Huggy
car system.
INSTALLATION ON BOARD WITH BASE
Verify that on the seat of the car there are not any items that
may hinder the correct leaning of the car base to the seat.
Verify that the backrest is in vertical position and the seat
where the car base has to be installed is NOT EQUIPPED
WITH FRONT AIRBAG.
HUGGY SHP BASE
Install the Huggy SHP base on board of the car referring to
the dedicated manual.
g. 21 Hook the Huggy Multix car seat to the Huggy SHP
base only IN THE OPPOSITE DIRECTION TO THE DRIVING
ONE, until hearing both CLICK sounds indicating the
occurred hooking.
CAUTION: make sure that the seat unit is properly hooked
on both sides.
g. 22 Rotate the seat unit handle (H1) to the most
forward position. Make sure that the two buttons (H2)
completely come out, after having arranged the handle to
the proper position.
g. 23 Pass the diagonal segment (L) of the car safety belt
through the rear guide (H6).
CAUTION: make sure that the safety belts are well
stretched and not twisted. Only in this way it is possible
to obtain the perfect anchoring of the Inglesina Huggy
car system.
REMOVAL OF THE HUGGY SHP BASE
g. 24 Rotate the seat unit handle (H1) to the vertical
position. After having removed the diagonal segment of the
safety belt from the rear guide (H6), act on the seat unit lever
(H7) and simultaneously lift it from the Huggy SHP base by
holding it by the handle.
INSTRUCTIONS
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Inglesina Huggy Multifix bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Inglesina Huggy Multifix in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks als bijlage per email.

De handleiding is 2,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info