749835

Ikea Rengora 404.755.72 Handleiding

13
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
ENGLISH 13
What to do if ...
In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the
following list. For other errors or issues please contact authorized After-sales Service which contact details can
be found in the warranty booklet. The manufacturer ensures the availability of spare parts for at least 10 years
after production date of this appliance.
Problems... Possible causes... Solutions...
What to do if ...What to do if ...
In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list.
For other errors or issues please contact authorized After-sales Service which contact details can be found in the warranty
booklet. The manufacturer ensures the availability of spare parts for at least 10 years after production date of this appliance.
PROBLEMS POSSIBLE CAUSES SOLUTIONS
Salt indicator is lit
Salt reservoir is empty. (After refill
the salt indicator may remain lit
for several wash cycles).
Refill reservoir with sal (for more information - see page 8).
Adjust water hardness - see table, page 8.
Rinse aid indicator is lit
Rinse aid dispenser is empty.
(After refill the rinse aid indicator
may remain lit for several wash
cycles).
Refill dispenser with rinse aid (for more information - see page 8).
The dishwasher won’t start
or does not respond to
commands.
The appliance has not been
plugged in properly. Insert the plug into the socket.
Power outage. The dishwasher starts automatically when the power returns.
The dishwasher door is not closed. Vigorously push the door until you hear the “click”.
It does not respond to commands.
Display shows: 9 or 12 and
On/Off LED is blinking rapidly.
Switch off the appliance by pressing the ON/OFF button, switch it
back on after approximately one minute and reset the program.
If problem persists, unplug the appliance for 1 minute, then plug it
back in.
The dishwasher won’t drain.
Display shows: 3 and
On/Off LED is blinking
rapidly
The wash cycle has not finished yet Wait until the wash cycle finishes
The drain hose is bent. Check that the drain hose is not bent (see INSTALLATION).
The sink drain pipe is blocked. Clean the sink drain pipe.
The filter is clogged up with food
residues. Clean the filter (see CLEANING THE FILTER ASSEMBLY).
The dishwasher makes
excessive noise.
The dishes are rattling against
each. Arrange the crockery correctly (see LOADING THE RACKS).
An excessive amount of foam has
been produced.
The detergent has not been measured out correctly or it is not
suitable for use in dishwashers (see FILLING THE DETERGENT
DISPENSER). Reset the current cycle by switching OFF the
dishwasher, then switch it on again, select a new program, press
START/Pause and close the door within 4 seconds. Please do not
add any detergent.
The dishes are not clean.
The crockery has not been
arranged properly. Arrange the crockery correctly (see LOADING THE RACKS).
The spray arms cannot rotate freely,
being hindered by the dishes. Arrange the crockery correctly (see LOADING THE RACKS).
The wash cycle is too gentle
and/or detergent efficiency is lo . Select an appropriate wash cycle (see PROGRAMS TABLE).
An excessive amount of foam has
been produced.
The detergent has not been measured out correctly or it is not suitable
for use in dishwashers (see FILLING THE DETERGENT DISPENSER).
The cap on the rinse aid compart-
ment has not been shut correctly. Make sure the cap of the rinse aid dispenser is closed.
The filter is soiled or clogged Clean the filter assembly (see CARE AND MAINTENANCE).
There is no salt. Fill the salt reservoir (see FILLING THE SALT RESERVOIR).
The dishwasher does not fill
the water.
Display shows: H
6
and On/Off LED is blin-
king
rapidly
No water in the water supply or
the tap is closed. Make sure there is water in the water supply or the tap running.
The inlet hose is bent. Make sure the inlet hose is not bent (see INSTALLATION) repro-
gram the dishwasher and reboot.
The sieve in the water inlet hose
is clogged; it is necessary to
clean it.
After having carried out the verification and cleaning, turn o f and
turn on the dishwasher and restart a new program.
Salt indicator is lit
Salt reservoir is empty. (After
rell the salt indicator may
remain lit for several wash
cycles).
Rell reservoir with sal (for more information - see page 8).
Adjust water hardness - see table, page 8.
What to do if ...What to do if ...
In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list.
For other errors or issues please contact authorized After-sales Service which contact details can be found in the warranty
booklet. The manufacturer ensures the availability of spare parts for at least 10 years after production date of this appliance.
PROBLEMS POSSIBLE CAUSES SOLUTIONS
Salt indicator is lit
Salt reservoir is empty. (After refill
the salt indicator may remain lit
for several wash cycles).
Refill reservoir with sal (for more information - see page 8).
Adjust water hardness - see table, page 8.
Rinse aid indicator is lit
Rinse aid dispenser is empty.
(After refill the rinse aid indicator
may remain lit for several wash
cycles).
Refill dispenser with rinse aid (for more information - see page 8).
The dishwasher won’t start
or does not respond to
commands.
The appliance has not been
plugged in properly. Insert the plug into the socket.
Power outage. The dishwasher starts automatically when the power returns.
The dishwasher door is not closed. Vigorously push the door until you hear the “click”.
It does not respond to commands.
Display shows: 9 or 12 and
On/Off LED is blinking rapidly.
Switch off the appliance by pressing the ON/OFF button, switch it
back on after approximately one minute and reset the program.
If problem persists, unplug the appliance for 1 minute, then plug it
back in.
The dishwasher won’t drain.
Display shows: 3 and
On/Off LED is blinking
rapidly
The wash cycle has not finished yet Wait until the wash cycle finishes
The drain hose is bent. Check that the drain hose is not bent (see INSTALLATION).
The sink drain pipe is blocked. Clean the sink drain pipe.
The filter is clogged up with food
residues. Clean the filter (see CLEANING THE FILTER ASSEMBLY).
The dishwasher makes
excessive noise.
The dishes are rattling against
each. Arrange the crockery correctly (see LOADING THE RACKS).
An excessive amount of foam has
been produced.
The detergent has not been measured out correctly or it is not
suitable for use in dishwashers (see FILLING THE DETERGENT
DISPENSER). Reset the current cycle by switching OFF the
dishwasher, then switch it on again, select a new program, press
START/Pause and close the door within 4 seconds. Please do not
add any detergent.
The dishes are not clean.
The crockery has not been
arranged properly. Arrange the crockery correctly (see LOADING THE RACKS).
The spray arms cannot rotate freely,
being hindered by the dishes. Arrange the crockery correctly (see LOADING THE RACKS).
The wash cycle is too gentle
and/or detergent efficiency is lo . Select an appropriate wash cycle (see PROGRAMS TABLE).
An excessive amount of foam has
been produced.
The detergent has not been measured out correctly or it is not suitable
for use in dishwashers (see FILLING THE DETERGENT DISPENSER).
The cap on the rinse aid compart-
ment has not been shut correctly. Make sure the cap of the rinse aid dispenser is closed.
The filter is soiled or clogged Clean the filter assembly (see CARE AND MAINTENANCE).
There is no salt. Fill the salt reservoir (see FILLING THE SALT RESERVOIR).
The dishwasher does not fill
the water.
Display shows: H
6
and On/Off LED is blin-
king
rapidly
No water in the water supply or
the tap is closed. Make sure there is water in the water supply or the tap running.
The inlet hose is bent. Make sure the inlet hose is not bent (see INSTALLATION) repro-
gram the dishwasher and reboot.
The sieve in the water inlet hose
is clogged; it is necessary to
clean it.
After having carried out the verification and cleaning, turn o f and
turn on the dishwasher and restart a new program.
Rinse aid indicator is lit
Rinse aid dispenser is empty.
(After rell the rinse aid indicator
may remain lit for several wash
cycles).
Rell dispenser with rinse aid (for more information - see
page 8).
The dishwasher won’t start
or does not respond to
commands.
The appliance has not been
plugged in properly. Insert the plug into the socket.
Power outage. For safety reasons, dishwasher will not re-start automatically
when power returns. Open dishwasher door, press Start
button and close the door within 4 seconds.
The dishwasher door is not
closed.
Natural Dry pin is not pulled in.
Vigorously push the door until you hear the “click”.
It does not respond to
commands. Display shows: 9 or
12 and On/O LED is blinking
rapidly.
Switch o the appliance by pressing the ON/OFF button,
switch it back on after approximately one minute and restart
the program. If problem persists, unplug the appliance for 1
minute, then plug it back in.
The dishwasher won’t drain.
Display shows: 3 and
On/O LED is blinking
rapidly
The wash cycle has not nished
yet Wait until the wash cycle nishes
The drain hose is bent. Check that the drain hose is not bent (see INSTALLATION).
The sink drain pipe is blocked. Clean the sink drain pipe.
The lter is clogged up with food
residues. Clean the lter (see CLEANING THE FILTER ASSEMBLY).
The dishwasher makes
excessive noise.
The dishes are rattling against
each. Arrange the crockery correctly (see LOADING THE RACKS).
An excessive amount of foam
has been produced. The detergent has not been measured out correctly or it is not
suitable for use in dishwashers (see FILLING THE DETERGENT
DISPENSER). Restart the current cycle by switching OFF the
dishwasher, then switch it on again, select a new program,
press START/Pause and close the door within 4 seconds.
Please do not add any detergent.
The dishes are not clean.
The crockery has not been
arranged properly. Arrange the crockery correctly (see LOADING THE RACKS).
The spray arms cannot rotate
freely, being hindered by the
dishes.
Arrange the crockery correctly (see LOADING THE RACKS).
The wash cycle is too gentle
and/or detergent eciency is
low.
Select an appropriate wash cycle (see PROGRAMS TABLE).
An excessive amount of foam
has been produced. The detergent has not been measured out correctly or it is not
suitable
for use in dishwashers (see FILLING THE DETERGENT
DISPENSER).
The cap on the rinse aid
compartment has not been shut
correctly.
Make sure the cap of the rinse aid dispenser is closed.
The lter is soiled or clogged Clean the lter assembly (see CARE AND MAINTENANCE).
There is no salt. Fill the salt reservoir (see FILLING THE SALT RESERVOIR).
… 13 …

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Ikea-Rengora-404.755.72

Zoeken resetten

  • Deur springt na programma niet meer open. Ik kan hem met de hand slecht op een kleine kier openen, verder gaat hij niet. Er lijkt niets tussen te zitten. Hoe krijg ik de deur weer openen? Ik drink nu maar uit jampotjes ?? Gesteld op 24-8-2024 om 19:42

    Reageer op deze vraag Misbruik melden

  • Met het deuropeningssysteem NaturalDry steekt na het beeindigen van het programma een staafje uit. Deze kan ik nu niet meer terugduwen zodat de deur niet meer dicht kan. We hebben geprobeerd dit systeem uit te schakelen maar zonder resultaat.
    Kent iemand dit probleem? En hopelijk ook een oplossing hiervoor? Gesteld op 28-7-2024 om 20:00

    Reageer op deze vraag Misbruik melden

  • Code 11, Vaatwasser 404.755.72 IKEA:
    sinds er een stroomstoring is geweest in onze straat geeft onze vaatwasser foutmelding 11. Deze is niet terug te vinden in de handleiding.
    Het apparaat pompt eerst bij aanzetten en valt dan stil, ook na de stroom er enige minuten afgehaald te hebben om te resetten.
    Heeft iemand hier ervaring mee?

    Vrgr, TK Gesteld op 21-7-2023 om 14:20

    Reageer op deze vraag Misbruik melden

  • Onze vaatwasser als deze klaar is code 15 aan
    wat beteken dit Gesteld op 30-9-2022 om 11:31

    Reageer op deze vraag Misbruik melden

  • Bij ons is het verholpen
    Er is een nieuwe pomp in gegaan Geantwoord op 19-12-2023 om 08:43

    Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ikea Rengora 404.755.72 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ikea Rengora 404.755.72 in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 18,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Ikea Rengora 404.755.72

Ikea Rengora 404.755.72 Gebruiksaanwijzing - Nederlands, Português, Espanõl - 64 pagina's

Ikea Rengora 404.755.72 Aanvulling / aanpassing - Alle talen - 1 pagina's

Ikea Rengora 404.755.72 Installatiehandleiding - Alle talen - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info