ENGLISH 10
1. Check water connection
Check that the dishwasher is connected to the water supply
and that the tap is open.
2. Switch on the dishwasher
Open the door and press the ON/OFF button.
3. Load the racks (see L
4. Filling the detergent dispenser
(see PROGRAMS T
5. Choose the progr
Select the most appropriate pr
the type of crockery and its soiling le
DESCRIPTION) by pr
Select the desired options (see FUNCTIONS).
6. Start
Start the wash cycle by pr
is lit) and closing the door within 4 sec. When the progr
starts you hear a single beep. If the door was not closed
within 4sec., the alarm sound will be played. In this case,
open the door
again within 4 sec.
7. End of wash cycle
The end of the wash cycle is indicated by beeps and b
ashing of the wash cycle number on the display
door and switch o the appliance by pr
button.
Wait for a fe
avoid burns. Unload the racks, beginning with the lo
The machine will switch o automatically during certain
extended periods of inactivity
electricity consumption. If the crockery is only lightly soiled
or if it has been rinsed with water before being placed in the
dishwasher
accordingly
Modifying a running progr
If a wrong pr
pro
hold the ON/OFF button, the machine will switch o.
Switch the machine back on using the ON/OFF button and select
the new wash cycle and any desir
cycle by pr
within 4 sec.
Adding extr
Without switching o the machine, open the door (ST
Pause led starts blinking) (be ware of HO
crockery inside the dishwasher
and close the door within 4 sec., the cycle will resume fr
point at which it was interrupted.
Accidental interruptions
If the door is opened during the wash cycle, or if there is a
power cut, the cycle stops. Pr
close the door within 4 sec., the cycle will resume fr
at which it was interrupted.
Daily Use
EN
11
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL P ANEL) .
If an option is not compatible with the selected program see PROGRAMS T ABLE , the corresponding LED ashes rapidly 3 times
and beeps will sound. The option will not be enabled.
T ABLET (T ab)
This setting allows you to optimize the performance of
the program according to the type of detergent used.
Press the ST AR T/P AUSE button for 3 seconds (the
corresponding symbol will light up) if you use combined
detergents in tablet form (rinse aid, salt and detergent in
1 dose).
If you use powder or liquid detergent, this option
should be off.
NaturalDry
NaturalDry is a convection drying system which automatically
opens the door during/after drying phase to ensure exceptional
drying performance every day . Door opens at the temperature
that is safe to your kitchen furniture, thus door will not be opened
when the option of SHOR T TIME is on.
As additional steam protection, special designed protection foil is
added together with the dishwasher . T o see how to mount protec -
tion foil please refer to (INST ALLA TION GUIDE) .
NaturalDry functionality could be disabled by the user as follows:
1. Go to the Dishwasher software menu pressing and holding
button (6 sec).
2. Y ou are currently in Light Control Menu (please refer to
OPERA TION INDICA T OR description), if you don’t want to
change anything please press and hold button (until one of
the two letters appears on the display)
3. Y ou switched to NaturalDry Control Menu, you could change
status of NaturalDry functionality by pressing button:
E – enabled d – disabled
T o conrm the change and exit from the Control Menu please
press and hold button (3 sec).
DELA Y
The start time of the program may be delayed for a period
of time between 1 and 12 hours.
1. Press the DELA Y button: the corresponding «h» symbol
appears on the display; each time you press the button,
the time (1h, 2h, etc. up to max. 12h) from the start of
the selected wash cycle will be increased.
2. Select the wash program, press the ST AR T/P AUSE
button and within 4 seconds close the door: the timer
will begin counting down.
3. Once this time has elapsed, the indicator light «h»
switches of f and the wash cycle begins.
T o adjust the delay time and select a shorter period of time,
press the DELA Y button. T o cancel it, press the button
repeatedly until the selected delayed start indicator light
«h» switches of f.
The DELA Y function cannot be set once a wash cycle
has been started.
FLEXI W ASH
If there are not many dishes to be washed, a half loading
may be used in order to save water , electricity and
detergent.
Select the program and then press the FLEXI W ASH button:
the symbol of the chosen rack will appear on the display .
By default the appliance washes dishes in all racks.
T o wash only the specic rack, press this button repeatedly:
shown on the display (only lower rack)
shown on the display (only upper rack)
shown on the display (only cutlery rack)
shown on the display (option is OFF and the appliance will
wash dishes in all racks).
Remember to load the upper or lower rack only , and to
reduce the amount of detergent accordingly .
If upper rack is removed, please apply detergent
directly to tub instead of detergent dispenser .
SHORT TIME
This option can be used to reduce the duration of the main
programs while maintaining the same washing and drying
performance levels.
After selecting the program, press the SHOR T TIME button
and t he indicat or light will swit ch on. T o deselect t he opt ion,
press the same button again.
EXTRA DR Y
T o improve the drying of the dishes, after selecting the
program, press the EXTRA DR Y button and the indicator
light comes on.
A higher temperature during t he nal rinse and an extended
drying phase allow for improving drying. T o deselect the
option, press the same button again. The EXTRA DR Y
option results in the lengthening of the wash cycle.
OPERA TION INDICA T OR
A LED light projected on the oor indicates that the
dishwasher is work ing. O ne of t he f ollowing operat ing
modes can be selected:
a) Disabled function.
b) When the cycle starts the light goes on for few seconds,
stays of f during the cycle and ashes at the end of the
cycle.
c) The light stays on during the cycle and ashes at the
end of the cycle (default mode).
If the delayed start was set, the light goes on either for the
rst few seconds or the entire duration of the countdown,
based on whether mode b) or c) was set.
The light goes of f every time the door is opened. T o select
the mode you prefer , switch on the machine, hold down
but t on P unt il one of the t hree let t ers appears on t he display ,
press button P until you reach the desired letter (or mode),
hold down button P to conrm the selection.
Note : If NaturalDry is active and it opens the door , then
Operation Indicator will not ash at the end of cycle.
FLEXIBLE WASH
If there are not many dishes to be washed, a half
loading may be used in order to save water
and detergent.
Select the program and then press the FLEXIBLE
W
appear on the display
By default the appliance washes dishes in all racks.
T
repeatedly:
EN
11
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL P ANEL) .
If an option is not compatible with the selected program see PROGRAMS T ABLE , the corresponding LED ashes rapidly 3 times
and beeps will sound. The option will not be enabled.
T ABLET (T ab)
This setting allows you to optimize the performance of
the program according to the type of detergent used.
Press the ST AR T/P AUSE button for 3 seconds (the
corresponding symbol will light up) if you use combined
detergents in tablet form (rinse aid, salt and detergent in
1 dose).
If you use powder or liquid detergent, this option
should be off.
NaturalDry
NaturalDry is a convection drying system which automatically
opens the door during/after drying phase to ensure exceptional
drying performance every day . Door opens at the temperature
that is safe to your kitchen furniture, thus door will not be opened
when the option of SHOR T TIME is on.
As additional steam protection, special designed protection foil is
added together with the dishwasher . T o see how to mount protec -
tion foil please refer to (INST ALLA TION GUIDE) .
NaturalDry functionality could be disabled by the user as follows:
1. Go to the Dishwasher software menu pressing and holding
button (6 sec).
2. Y ou are currently in Light Control Menu (please refer to
OPERA TION INDICA T OR description), if you don’t want to
change anything please press and hold button (until one of
the two letters appears on the display)
3. Y ou switched to NaturalDry Control Menu, you could change
status of NaturalDry functionality by pressing button:
E – enabled d – disabled
T o conrm the change and exit from the Control Menu please
press and hold button (3 sec).
DELA Y
The start time of the program may be delayed for a period
of time between 1 and 12 hours.
1. Press the DELA Y button: the corresponding «h» symbol
appears on the display; each time you press the button,
the time (1h, 2h, etc. up to max. 12h) from the start of
the selected wash cycle will be increased.
2. Select the wash program, press the ST AR T/P AUSE
button and within 4 seconds close the door: the timer
will begin counting down.
3. Once this time has elapsed, the indicator light «h»
switches of f and the wash cycle begins.
T o adjust the delay time and select a shorter period of time,
press the DELA Y button. T o cancel it, press the button
repeatedly until the selected delayed start indicator light
«h» switches of f.
The DELA Y function cannot be set once a wash cycle
has been started.
FLEXI W ASH
If there are not many dishes to be washed, a half loading
may be used in order to save water , electricity and
detergent.
Select the program and then press the FLEXI W ASH button:
the symbol of the chosen rack will appear on the display .
By default the appliance washes dishes in all racks.
T o wash only the specic rack, press this button repeatedly:
shown on the display (only lower rack)
shown on the display (only upper rack)
shown on the display (only cutlery rack)
shown on the display (option is OFF and the appliance will
wash dishes in all racks).
Remember to load the upper or lower rack only , and to
reduce the amount of detergent accordingly .
If upper rack is removed, please apply detergent
directly to tub instead of detergent dispenser .
SHORT TIME
This option can be used to reduce the duration of the main
programs while maintaining the same washing and drying
performance levels.
After selecting the program, press the SHOR T TIME button
and t he indicat or light will swit ch on. T o deselect t he opt ion,
press the same button again.
EXTRA DR Y
T o improve the drying of the dishes, after selecting the
program, press the EXTRA DR Y button and the indicator
light comes on.
A higher temperature during t he nal rinse and an extended
drying phase allow for improving drying. T o deselect the
option, press the same button again. The EXTRA DR Y
option results in the lengthening of the wash cycle.
OPERA TION INDICA T OR
A LED light projected on the oor indicates that the
dishwasher is work ing. O ne of t he f ollowing operat ing
modes can be selected:
a) Disabled function.
b) When the cycle starts the light goes on for few seconds,
stays of f during the cycle and ashes at the end of the
cycle.
c) The light stays on during the cycle and ashes at the
end of the cycle (default mode).
If the delayed start was set, the light goes on either for the
rst few seconds or the entire duration of the countdown,
based on whether mode b) or c) was set.
The light goes of f every time the door is opened. T o select
the mode you prefer , switch on the machine, hold down
but t on P unt il one of the t hree let t ers appears on t he display ,
press button P until you reach the desired letter (or mode),
hold down button P to conrm the selection.
Note : If NaturalDry is active and it opens the door , then
Operation Indicator will not ash at the end of cycle.
shown on the display (only lo
shown on the display (only upper rack)
shown on the display (only cutlery rack)
shown on the display (option is OFF and the appliance
will wash dishes in all racks).
Remember to load the upper or lower r
the amount of detergent accordingly
please apply detergent directly to tub instead of deter
dispenser
9
ENGLISH
1. Press the DELA Y button: the corresponding «h» symbol
appears on the display; each time you press the button,
the time (1h, 2h, etc. up to max. 12h) from the start of
the selected wash cycle will be increased.
2. Select the wash program, press the ST AR T/P AUSE
button and within 4 seconds close the door: the timer
will begin counting down.
3. Once this time has elapsed, the indicator light «h»
switches of f and the wash cycle begins.
T o adjust the delay time and select a shorter period of time,
press the DELA Y button. T o cancel it, press the button
repeatedly until the selected delayed start indicator light
«h» switches of f.
The DELA Y function cannot be set once a wash cycle
has been started.
NaturalDry
Door opening system NaturalDry is a convection drying system
which automatically opens the door during/after drying phase to
ensure exceptional drying performance every day . Door opens at
the temperature that is safe to your kitchen furniture.
As additional steam protection, special designed protection foil is
added together with the dishwasher . T o see how to mount protec-
tion foil please refer to (INST ALLA TION GUIDE) .
NaturalDry functionality could be disabled by the user as follows:
1. Go to the Dishwasher software menu pressing and holding
button (6 sec).
2. Y ou switched to NaturalDry Control Menu, you could change
status of NaturalDry functionality by pressing button:
E – enabled d – disabled
T o conrm the change and exit from the Control Menu please
press and hold button (3 sec).
DELA Y
The start time of the program may be delayed for a period
of time between 1 and 12 hours.
Program
Drying
phase
Natural
Dry
A vailable
options *)
Duration of
wash pro-
gram
(h:min) **)
W ater
consumption
(litres/cycle)
Energy
consumption
(kWh/cycle)
50° 2:45 12.0 0.92
1 Eco
2 Conventional
wash and dry 55° 2:00 15.0 1.35
3 Intensive 65° - 2:30 15.0 1.50
4 Fast 50° - - 0:55 1 1.5 1.10
5 Sanitizing 65° - 1:40 1 1.5 1.30
6 Pre-W ash
-
- - 0:10 4.5 0.01
7 Self-Clean 65° - - 0:50 8.0 0.80
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Note for T est Laboratories: For information on comparative EN testing conditions, please send an email to the following
address: dw_test_support@whirlpool.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
load, load balancing, additional selected options and sensor calibration.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
PROGRAMS DESCRIPTION
DELAY
The start time of the progr
period of time between 1 and 12 hours.
1. Press the DELA
symbol appears on the display; each time you press
the button, the time (1h, 2h, etc. up to max. 12h) from
the start of the selected wash cycle will be increased.
2. Select the wash progr
button and within 4 seconds close the door: the timer
will begin counting down.
3. Once this time has elapsed, the indicator light «h»
switches o and the wash cycle begins.
T
of time, press the DELA
the button repeatedly until the selected delayed start
indicator light «h» switches o.
The DELA
cycle has been started.
EN
11
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL P ANEL) .
If an option is not compatible with the selected program see PROGRAMS T ABLE , the corresponding LED ashes rapidly 3 times
and beeps will sound. The option will not be enabled.
T ABLET (T ab)
This setting allows you to optimize the performance of
the program according to the type of detergent used.
Press the ST AR T/P AUSE button for 3 seconds (the
corresponding symbol will light up) if you use combined
detergents in tablet form (rinse aid, salt and detergent in
1 dose).
If you use powder or liquid detergent, this option
should be off.
NaturalDry
NaturalDry is a convection drying system which automatically
opens the door during/after drying phase to ensure exceptional
drying performance every day . Door opens at the temperature
that is safe to your kitchen furniture, thus door will not be opened
when the option of SHOR T TIME is on.
As additional steam protection, special designed protection foil is
added together with the dishwasher . T o see how to mount protec -
tion foil please refer to (INST ALLA TION GUIDE) .
NaturalDry functionality could be disabled by the user as follows:
1. Go to the Dishwasher software menu pressing and holding
button (6 sec).
2. Y ou are currently in Light Control Menu (please refer to
OPERA TION INDICA T OR description), if you don’t want to
change anything please press and hold button (until one of
the two letters appears on the display)
3. Y ou switched to NaturalDry Control Menu, you could change
status of NaturalDry functionality by pressing button:
E – enabled d – disabled
T o conrm the change and exit from the Control Menu please
press and hold button (3 sec).
DELA Y
The start time of the program may be delayed for a period
of time between 1 and 12 hours.
1. Press the DELA Y button: the corresponding «h» symbol
appears on the display; each time you press the button,
the time (1h, 2h, etc. up to max. 12h) from the start of
the selected wash cycle will be increased.
2. Select the wash program, press the ST AR T/P AUSE
button and within 4 seconds close the door: the timer
will begin counting down.
3. Once this time has elapsed, the indicator light «h»
switches of f and the wash cycle begins.
T o adjust the delay time and select a shorter period of time,
press the DELA Y button. T o cancel it, press the button
repeatedly until the selected delayed start indicator light
«h» switches of f.
The DELA Y function cannot be set once a wash cycle
has been started.
FLEXI W ASH
If there are not many dishes to be washed, a half loading
may be used in order to save water , electricity and
detergent.
Select the program and then press the FLEXI W ASH button:
the symbol of the chosen rack will appear on the display .
By default the appliance washes dishes in all racks.
T o wash only the specic rack, press this button repeatedly:
shown on the display (only lower rack)
shown on the display (only upper rack)
shown on the display (only cutlery rack)
shown on the display (option is OFF and the appliance will
wash dishes in all racks).
Remember to load the upper or lower rack only , and to
reduce the amount of detergent accordingly .
If upper rack is removed, please apply detergent
directly to tub instead of detergent dispenser .
SHORT TIME
This option can be used to reduce the duration of the main
programs while maintaining the same washing and drying
performance levels.
After selecting the program, press the SHOR T TIME button
and t he indicat or light will swit ch on. T o deselect t he opt ion,
press the same button again.
EXTRA DR Y
T o improve the drying of the dishes, after selecting the
program, press the EXTRA DR Y button and the indicator
light comes on.
A higher temperature during t he nal rinse and an extended
drying phase allow for improving drying. T o deselect the
option, press the same button again. The EXTRA DR Y
option results in the lengthening of the wash cycle.
OPERA TION INDICA T OR
A LED light projected on the oor indicates that the
dishwasher is work ing. O ne of t he f ollowing operat ing
modes can be selected:
a) Disabled function.
b) When the cycle starts the light goes on for few seconds,
stays of f during the cycle and ashes at the end of the
cycle.
c) The light stays on during the cycle and ashes at the
end of the cycle (default mode).
If the delayed start was set, the light goes on either for the
rst few seconds or the entire duration of the countdown,
based on whether mode b) or c) was set.
The light goes of f every time the door is opened. T o select
the mode you prefer , switch on the machine, hold down
but t on P unt il one of t he t hree let t ers appears on t he display ,
press button P until you reach the desired letter (or mode),
hold down button P to conrm the selection.
Note : If NaturalDry is active and it opens the door , then
Operation Indicator will not ash at the end of cycle.
This option can be used to reduce the dur
main progr
and drying performance levels. After selecting the
progr
indicator light will switch on. T
press the same button again.
EN
11
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL P ANEL) .
If an option is not compatible with the selected program see PROGRAMS T ABLE , the corresponding LED ashes rapidly 3 times
and beeps will sound. The option will not be enabled.
T ABLET (T ab)
This setting allows you to optimize the performance of
the program according to the type of detergent used.
Press the ST AR T/P AUSE button for 3 seconds (the
corresponding symbol will light up) if you use combined
detergents in tablet form (rinse aid, salt and detergent in
1 dose).
If you use powder or liquid detergent, this option
should be off.
NaturalDry
NaturalDry is a convection drying system which automatically
opens the door during/after drying phase to ensure exceptional
drying performance every day . Door opens at the temperature
that is safe to your kitchen furniture, thus door will not be opened
when the option of SHOR T TIME is on.
As additional steam protection, special designed protection foil is
added together with the dishwasher . T o see how to mount protec -
tion foil please refer to (INST ALLA TION GUIDE) .
NaturalDry functionality could be disabled by the user as follows:
1. Go to the Dishwasher software menu pressing and holding
button (6 sec).
2. Y ou are currently in Light Control Menu (please refer to
OPERA TION INDICA T OR description), if you don’t want to
change anything please press and hold button (until one of
the two letters appears on the display)
3. Y ou switched to NaturalDry Control Menu, you could change
status of NaturalDry functionality by pressing button:
E – enabled d – disabled
T o conrm the change and exit from the Control Menu please
press and hold button (3 sec).
DELA Y
The start time of the program may be delayed for a period
of time between 1 and 12 hours.
1. Press the DELA Y button: the corresponding «h» symbol
appears on the display; each time you press the button,
the time (1h, 2h, etc. up to max. 12h) from the start of
the selected wash cycle will be increased.
2. Select the wash program, press the ST AR T/P AUSE
button and within 4 seconds close the door: the timer
will begin counting down.
3. Once this time has elapsed, the indicator light «h»
switches of f and the wash cycle begins.
T o adjust the delay time and select a shorter period of time,
press the DELA Y button. T o cancel it, press the button
repeatedly until the selected delayed start indicator light
«h» switches of f.
The DELA Y function cannot be set once a wash cycle
has been started.
FLEXI W ASH
If there are not many dishes to be washed, a half loading
may be used in order to save water , electricity and
detergent.
Select the program and then press the FLEXI W ASH button:
the symbol of the chosen rack will appear on the display .
By default the appliance washes dishes in all racks.
T o wash only the specic rack, press this button repeatedly:
shown on the display (only lower rack)
shown on the display (only upper rack)
shown on the display (only cutlery rack)
shown on the display (option is OFF and the appliance will
wash dishes in all racks).
Remember to load the upper or lower rack only , and to
reduce the amount of detergent accordingly .
If upper rack is removed, please apply detergent
directly to tub instead of detergent dispenser .
SHORT TIME
This option can be used to reduce the duration of the main
programs while maintaining the same washing and drying
performance levels.
After selecting the program, press the SHOR T TIME button
and t he indicat or light will swit ch on. T o deselect t he opt ion,
press the same button again.
EXTRA DR Y
T o improve the drying of the dishes, after selecting the
program, press the EXTRA DR Y button and the indicator
light comes on.
A higher temperature during t he nal rinse and an extended
drying phase allow for improving drying. T o deselect the
option, press the same button again. The EXTRA DR Y
option results in the lengthening of the wash cycle.
OPERA TION INDICA T OR
A LED light projected on the oor indicates that the
dishwasher is work ing. O ne of t he f ollowing operat ing
modes can be selected:
a) Disabled function.
b) When the cycle starts the light goes on for few seconds,
stays of f during the cycle and ashes at the end of the
cycle.
c) The light stays on during the cycle and ashes at the
end of the cycle (default mode).
If the delayed start was set, the light goes on either for the
rst few seconds or the entire duration of the countdown,
based on whether mode b) or c) was set.
The light goes of f every time the door is opened. T o select
the mode you prefer , switch on the machine, hold down
but t on P unt il one of t he t hree let t ers appears on t he display ,
press button P until you reach the desired letter (or mode),
hold down button P to conrm the selection.
Note : If NaturalDry is active and it opens the door , then
Operation Indicator will not ash at the end of cycle.
T
the progr
indicator light comes on. A higher temperatur
during the nal rinse and an extended drying phase
allow for impr
press the same button again. The EXTRA DRY option
results in the lengthening of the wash cycle.
Check that the dishwasher is connected to the water supply
and that the tap is open.
Open the door and press the ON/OFF button.
(see LOADING THE RACKS)
(see PROGRAMS T ABLE).
Select the most appropriate program in accordance with the
type of crockery and its soiling level (see PROGRAMS
DESCRIPTION) by pressing the button.
Select the desired options (see OPTIONS AND FUNCTIONS) .
Start the wash cycle by pressing ST AR T/Pause button (led
is lit) and closing the door within 4 sec. When the program
starts you hear a single beep. If the door was not closed within
4sec., the alarm sound will be played. In this case, open the
door , press ST AR T/Pause button and close the door again
within 4 sec.
The end of the wash cycle is indicated by beeps and by the
ashing of the wash cycle number on the display . Open the
door and switch of f the appliance by pressing the ON/OFF
button.
W ait for a few minutes before removing the crockery - to avoid
burns. Unload the racks, beginning with the lower one.
If a wrong program was selected, it is possible to change it, pro -
vided that it has only just begun: open the door , press and hold
the button, the machine will switch of f.
Switch the machine back on using the button and select
the new wash cycle and any desired options; Start the wash cycl e
by pressing button and closing the door within 4 sec.
Without switching of f the machine, open the door (
led starts blinking) ( ) and place the
crockery inside the dishwasher . Press the button
and close the door within 4 sec., the cycle will resume from the
point at which it was interrupted.
If the door is opened during the wash cycle, or if there is a power
cut, the cycle stops. Press the button and close
the door within 4 sec., the cycle will resume from the point at
which it was interrupted.
DAILY USE
Functions
- Normally soiled crockery. Standard program, the most efficient in terms of its combined energy and water
consumption.
- Mixed soil. For normally soiled dishes with dried food residues.
- Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used
for delicate items).
- Use to refresh crockery planned to be washed later. No detergent to be used with this program.
- Normally soiled crockery. Everyday cycle, that ensures optimal cleaning performance in shorter time.
- Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform
maintenance of the dishwasher.
- Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance
using hot water.
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL P ANEL) .
see PROGRAMS T ABLE
If there are not many dishes to be washed, a half load
cycle may be used in order to save water , electricity and
detergent. Select the program and press the HALF LOAD
button: the indicator light will light up. P ress the HALF
LOAD button to deselect this option.
T o adjust the delay time and select a shorter period of time,
press the DELA Y button. T o cancel it, press the button
repeatedly until the selected delayed start indicator light
«h» switches of f.
This setting allows you to optimize the performance of
the program according to the type of detergent used.
Press the ST AR T/P AUSE button for 3 seconds (the
corresponding symbol will light up) if you use combined
detergents in tablet form (rinse aid, salt and detergent in
1 dose).
1. Go to the Dishwasher software menu pressing and holding
button (6 sec).
2. Y ou switched to NaturalDry Control Menu, you could change
status of NaturalDry functionality by pressing button:
– enabled – disabled
T o conrm the change and exit from the Control Menu please
press and hold button (3 sec).
This setting allo
of the progr
used. Press the ST
(the corresponding symbol will light up) if you use
combined detergents in tablet form (rinse aid, salt
and detergent in 1 dose).
If you use powder or liquid detergent, this option
should be o.
EN
11
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL P ANEL) .
If an option is not compatible with the selected program see PROGRAMS T ABLE , the corresponding LED ashes rapidly 3 times
and beeps will sound. The option will not be enabled.
T ABLET (T ab)
This setting allows you to optimize the performance of
the program according to the type of detergent used.
Press the ST AR T/P AUSE button for 3 seconds (the
corresponding symbol will light up) if you use combined
detergents in tablet form (rinse aid, salt and detergent in
1 dose).
If you use powder or liquid detergent, this option
should be off.
NaturalDry
NaturalDry is a convection drying system which automatically
opens the door during/after drying phase to ensure exceptional
drying performance every day . Door opens at the temperature
that is safe to your kitchen furniture, thus door will not be opened
when the option of SHOR T TIME is on.
As additional steam protection, special designed protection foil is
added together with the dishwasher . T o see how to mount protec -
tion foil please refer to (INST ALLA TION GUIDE) .
NaturalDry functionality could be disabled by the user as follows:
1. Go to the Dishwasher software menu pressing and holding
button (6 sec).
2. Y ou are currently in Light Control Menu (please refer to
OPERA TION INDICA T OR description), if you don’t want to
change anything please press and hold button (until one of
the two letters appears on the display)
3. Y ou switched to NaturalDry Control Menu, you could change
status of NaturalDry functionality by pressing button:
E – enabled d – disabled
T o conrm the change and exit from the Control Menu please
press and hold button (3 sec).
DELA Y
The start time of the program may be delayed for a period
of time between 1 and 12 hours.
1. Press the DELA Y button: the corresponding «h» symbol
appears on the display; each time you press the button,
the time (1h, 2h, etc. up to max. 12h) from the start of
the selected wash cycle will be increased.
2. Select the wash program, press the ST AR T/P AUSE
button and within 4 seconds close the door: the timer
will begin counting down.
3. Once this time has elapsed, the indicator light «h»
switches of f and the wash cycle begins.
T o adjust the delay time and select a shorter period of time,
press the DELA Y button. T o cancel it, press the button
repeatedly until the selected delayed start indicator light
«h» switches of f.
The DELA Y function cannot be set once a wash cycle
has been started.
FLEXI W ASH
If there are not many dishes to be washed, a half loading
may be used in order to save water , electricity and
detergent.
Select the program and then press the FLEXI W ASH button:
the symbol of the chosen rack will appear on the display .
By default the appliance washes dishes in all racks.
T o wash only the specic rack, press this button repeatedly:
shown on the display (only lower rack)
shown on the display (only upper rack)
shown on the display (only cutlery rack)
shown on the display (option is OFF and the appliance will
wash dishes in all racks).
Remember to load the upper or lower rack only , and to
reduce the amount of detergent accordingly .
If upper rack is removed, please apply detergent
directly to tub instead of detergent dispenser .
SHORT TIME
This option can be used to reduce the duration of the main
programs while maintaining the same washing and drying
performance levels.
After selecting the program, press the SHOR T TIME button
and t he indicat or light will swit ch on. T o deselect t he opt ion,
press the same button again.
EXTRA DR Y
T o improve the drying of the dishes, after selecting the
program, press the EXTRA DR Y button and the indicator
light comes on.
A higher temperature during t he nal rinse and an extended
drying phase allow for improving drying. T o deselect the
option, press the same button again. The EXTRA DR Y
option results in the lengthening of the wash cycle.
OPERA TION INDICA T OR
A LED light projected on the oor indicates that the
dishwasher is work ing. O ne of t he f ollowing operat ing
modes can be selected:
a) Disabled function.
b) When the cycle starts the light goes on for few seconds,
stays of f during the cycle and ashes at the end of the
cycle.
c) The light stays on during the cycle and ashes at the
end of the cycle (default mode).
If the delayed start was set, the light goes on either for the
rst few seconds or the entire duration of the countdown,
based on whether mode b) or c) was set.
The light goes of f every time the door is opened. T o select
the mode you prefer , switch on the machine, hold down
but t on P unt il one of the t hree let t ers appears on t he display ,
press button P until you reach the desired letter (or mode),
hold down button P to conrm the selection.
Note : If NaturalDry is active and it opens the door , then
Operation Indicator will not ash at the end of cycle.
OPERA
A LED light projected on the oor indicates that
the dishwasher is working. One of the following
operating modes can be selected:
a) Disabled function.
b) When the cycle starts the light goes on for a few
seconds, stays o during the cycle and ashes at the
end of the cycle.
c) The light stays on during the cycle and ashes at
the end of the cycle (default mode).
If the delayed start was set, the light goes on either
for the rst few seconds or the entir
countdown, based on whether mode b) or c) was set.
The light goes o every time the door is opened.
T
hold down button
ENGLISH
8
Rinse aid makes dish DR YING easier . The rinse aid dispenser
should be lled when the
in the control panel is lit.
1. Open the dispenser by pressing and pulling up the tab on
the lid.
2. Carefully introduce the rinse aid as far as the maximum
(1 10 ml) reference notch of the lling space - avoid spilling it.
If this happens, clean the spill immediately with a dry cloth.
3. Press the lid down until you hear a click to close it.
A
B
If you are not completely satised with the drying results, you can
adjust the quantity of rinse aid used.
• Switch the dishwasher on using the ON/OFF button.
• Switch it of f using the ON/OFF button.
• Press button three times - a beep will be hear d.
• Switch it on using the ON/OFF button.
•
•
The current selection level number and rinse aid indicator light ash.
Press button to select the level of rinse aid qu antity to be
supplied.
• Switch it of f using the ON/OFF button.
Setting is complete!
If the rinse aid level is set to ZERO (ECO), no rinse aid will be
supplied. The LOW RINSE AID indicator light will not be lit if you
run out of rinse aid. A maximum of 5 levels can be set according to
the dishwasher model. The factory setting is specic to the model,
please follow instruction above to check this for your machine.
• If you see bluish streaks on the dishes, set a low number (1-2).
• If there are drops of water or limescale marks on the dishes,
set a high number (3-4).
T o achieve the best washing and drying results, the combined
useof detergent, rinse aid liquid and rened salt is required.
W e recommend using detergents that do not contain phosphates
or chlorine, as these products are harmful to the environment.
Good washing results also depend on the correct amount of
detergent being used.
Exceeding the stated amount does not result in a more ef fective
wash and increases environmental pollution.
The amount can be adjusted to the soil level. In the case of
normally soiled items, use approximately either 35g (powder
detergent) or 35ml (liquid detergent) and additional tea spoon of
detergent directly inside the tub. If tablets are used, one tablet
will be enough.
If the crockery is only lightly soiled or if it has been rinsed with
water before being placed in the dishwasher , reduce the amount
of detergent used accordingly (minimum 25 g/ml) e.g. skip the
powder/gel putted inside the tub.
1.
2.
When measuring out the detergent refer to the mentioned ear -
lier information to add the proper quantity . Inside the dispenser
there are indications to help the detergent dosing.
Remove detergent residues from the edges of the dispenser
and close the cover until it clicks.
3. Close the lid of the detergent dispenser by pulling it up until
the closing device is secured in place.
until one of the three letters
Functions
