670434
34
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
5
OTHER FUNCTIONS
5-4
Noise Blanker (NB)
SSB, CW, FSK and AM modes
The Noise blanker eliminates pulse-type noise such
as the noise from car ignitions.
1. On the FUNCTION screen, touch [NB].
L
Each touch turns the Noise Blanker function ON or OFF.
2. To change the NB level, depth or width, touch
[NB] for 1 second.
Turns ON the Noise Blanker and opens the NB menu.
3. Touch the adjusting item. (Example: DEPTH)
4. Rotate to adjust the level.
NOTE: When using the Noise Blanker, received signals
may be distorted if they are excessively strong or the noise
is other than a pulse type. In that case, turn the OFF Noise
Blanker, or shallow the DEPTH on the NB menu.
See the description below for details.
LEVEL (Default: 50%)
Set the Noise Blanker activation level to between 0
and 100%.
DEPTH (Default: 8)
Adjust the noise attenuation level between 1 and 10.
WIDTH (Default: 50)
Adjust the blanking duration time between 1 and 100.
Noise Reduction
The Noise Reduction function digitally reduces
random noise components, and enhances desired
signals that are buried in noise.
L The function is effective in the SSB, AM and CW modes.
1. On the FUNCTION screen, touch [NR].
LEach touch turns the Noise Reduction function ON or OFF.
2. To change the Noise Reduction level, touch [NR]
for 1 second.
Turns ON the Noise Reduction and opens the NR menu.
3. Set the Noise Reduction level to between 0 and 15.
Adjust the Noise Reduction level to where noise is
reduced and the received signal is not distorted.
L Set to a higher level to increase the reduction level,
and a lower level to decrease it.
Noise Blanker OFF Noise Blanker ON
Pulse-type
noise
Receive
signal
Noise Blanker ON
(Not enough DEPTH)
Noise Blanker ON
(WIDTH set too wide)
NB WIDTH
Receive
signal
LEVEL
Receive
signal
Receive signal
Pulse-type
noise remains
Part of the receive signal
is eliminated along with
pulse-type noise
Pulse-type
noise eliminated
Duplex operation
You can receive a communication that uses different
frequencies for transmitting and receiving (Duplex), by
setting the offset frequency and shift direction.
1. On the FUNCTION screen, touch [DUP].
Each touch changes between [DUP–], [DUP+] and [OFF].
2. To change the frequency offset or shift direction,
touch [DUP] for 1 second.
3. Touch the numeric keys or rotate , to set
the frequency offset.
Settable range: 0.000 ~ 200.000 MHz (1 kHz step)
Touch to change the Shift direction
Receive frequency
(When the Monitor function is ON.)
Offset frequency
4. Hold down to turn ON the Monitor function.
The receive frequency shifts according to the set frequency
offset and direction, while holding down
.
[DUP–] or [DUP+] blinks when the shifted frequency is
out of receive frequency range.
The frequency offset and direction is stored in each
memory channel.
When the frequency offset is set to 0.000 MHz, the
receive frequency is not shifted.
34

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Icom IC-R8600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Icom IC-R8600 in de taal/talen: Engels als bijlage per email.

De handleiding is 22,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info