670434
32
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
5
OTHER FUNCTIONS
5-2
Using the Digital Twin PBT
SSB, CW, FSK and AM modes
The Digital Twin PBT (Passband Tuning) electronically
narrows the IF passband width by over wrapping the
passband frequency ranges of 2 PBT lters (PBT1
and PBT2), to reject interference. The IC-R8600 uses
DSP for the PBT function.
1. Push
.
2. Touch [PBT1] or [PBT2].
3. Rotate to adjust the passband width.
The current passband width (BW) and shift frequency
(SFT) is displayed.
L A dot is displayed right below the shift frequency
indicates that the passband frequency is shifted.
To narrow the IF passband width, rotate
to
shift the passband width in the opposite direction from
each other.
To shift the pass band frequency range, match both
the [PBT1] and [PBT2].
The PBT is adjustable in 50 Hz steps in the SSB, CW,
and FSK modes, and 200 Hz in the AM mode. In this
case, the center shift frequency changes in 25 Hz
steps in the SSB, CW, and FSK modes, and 100 Hz in
the AM mode.
Touch [PBT1] or [PBT2] for 1 second to clear the PBT
setting.
4. Push
EXIT
to close the setting menu.
NOTE: While adjusting, you may hear noise. This comes
from the DSP unit and does not indicate an equipment
malfunction.
IP Plus function
The IP Plus function improves the Intermodulation
Distortion (IMD) quality by optimizing the direct
sampling system performance.
This function optimizes the Analog/Digital Converter
(ADC) against the distortion when you receive a
strong input signals. It also improves the Third-order
Intercept Point (IP3) while minimizing the reduction of
the receive sensitivity.
LEach band memorizes the ON/OFF setting.
z Touch [IP+] on the FUNCTION screen.
L Each touch turns the IP Plus function ON or OFF.
L Select ON to prioritize the IP quality, and select OFF
to prioritize the receive sensitivity.
Notch Filter
The notch lter suppresses interference.
Auto Notch automatically attenuates beat tones,
tuning signals and so on.
The Manual Notch attenuates beat tones, tuning
signals and so on by adjusting the notching width and
frequency.
Auto Notch: Used in the SSB, AM and FM modes.
Manual Notch: Used in the SSB, CW, FSK and AM
modes.
z Touch [NOTCH] on the FUNCTION screen.
Each touch changes between “AN (Auto Notch),” “MN
(Manual Notch)” and OFF.
L In the CW or FSK mode, only Manual Notch (MN)
can be selected.
L In the FM or DIGITAL mode, only Auto Notch (AN)
can be selected.
D
Setting the notching width and frequency
1. Touch [NOTCH] for 1 second.
LThe Notch setting menu is displayed.
2. Slowly rotate to adjust the notching
frequency on the POSITION scale.
3. Touch [WIDTH] to select the Manual Notch filter
width from “WIDE,” “MID” or “NAR.
NOTE: While adjusting, noise may be heard.
This comes from the DSP unit and does not indicate
an equipment malfunction.
A dot is displayed
when the lter
frequency is shifted.
32

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Icom IC-R8600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Icom IC-R8600 in de taal/talen: Engels als bijlage per email.

De handleiding is 22,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info