509907
7
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
You write,
it types!
Quick Start Guide
for Windows®, Mac®, iPhone® and iPad®
J120305-1
English
Français
Nederlands
Deutsch
Español
Italiano
Português
Русский
I.R.I.S. Products & Technologies
I.R.I.S. - Louvain-la-Neuve (Belgium)
I.R.I.S. AG - Aachen (Germany)
I.R.I.S. Inc. - Delray Beach (United States)
I.R.I.S. HK Ltd - Hong Kong (China)
© Copyright 2012 I.R.I.S. s.a./n.v.
All rights reserved for all countries. I.R.I.S., I.R.I.S. product names, I.R.I.S. logos and
I.R.I.S. product logos are I.R.I.S. trademarks. All other products and names men-
tioned are trademarks or registered trademarks from their respective owners.
765010457770
www.irislink.com
IRISNotes1-Smartphones-cover QUG - INTL.indd 1 8/03/12 12:09
English English
This Quick User Guide provides general guidelines for installing and using IRISNotes
Executive. For detailed instructions on the IRISNotes
Executive’s full range of
functionalities, please refer to the help le provided with your software.
The descriptions in this guide are based on the Windows
®
7 and Mac OS
®
X Lion
operating systems. All information is subject to change without prior notice.
Table of Contents
1.Package Contents
2.Charging the Batteries
3.Writing Notes
4.Using IRISNotes
on a Windows PC or Mac OS computer
5.Using IRISNotes
on an iPad
®
, iPhone
®
or iPod
®
6.Reference Information
7.Tips for Writing Notes
1. Package Contents
IRISNotes
Executive installation CD-ROM.
Digital pen, receiver unit, retractable USB cable, 30-pin USB cable, three ink rells, pen
pocket
2. Charging the Batteries
BEFORE YOU BEGIN: charge the pen and receiver for at least 30 minutes.
1. Charge the pen battery:
Open the cover at the top of the pen.
Connect the pen to your computer with the provided USB cable.
2. Charge the receiver battery:
Connect the receiver to your computer with the provided USB cable.
Tip: make sure the computer is on. Otherwise the batteries won’t charge. It may take up to
3.5 hours to fully charge the batteries.
English English
3. Writing Notes
Step 1 Clip the receiver unit to a sheet of paper.
IRISNotes
supports pages up to A4 size.
Tip: always place the unit at the top center of a page.
Step 2 Press the power button for 5 seconds to turn on the receiver.
Step 3 Start writing a note.
Important notes:
Disconnect the receiver from your computer.
While you write you should see the pen icon on the display.
Tips:
Hold the pen rmly and write normally. Try to avoid line skew.
Do not write directly below the receiver, but leave at least a 1.5 cm
margin.
Do not put your ngers between the pen tip and the receiver. This will
block the signal.
See the section Tips for Writing Notes at the end of this guide
for some more pointers.
Step 4 Press the power button to end and save the current note.
Pressing the button is required to save your notes to the receiver. The
number on the display increases by 1 each time you press the power
button after writing a note. The number shows how many notes are
saved to the receiver.
You can write up to 100 notes of A4 size.
English English
4.Using IRISNotes
on a Windows PC or Mac OS computer
In order to use IRISNotes
, you must rst install the IRISNotes
Executive software.
4.1 Installing the software
1. Insert the IRISNotes
cd-rom into the cd-rom drive of your computer.
PC Mac
Go to Computer, locate your cd-rom
drive and double-click it.
Double-click the cd-rom icon on the Desktop
Double-click IRISNotesExecutive-
Setup.exe to start the Installation Wizard.
Double-click IRISNotes-installer.zip.
Open the folder IRISNotes-Installer and
run the IRISNotes.mpkg le.
2. Follow the on-screen instructions to install the software.
Important note (PC): make sure to install the correct languages in which you
write your notes.
Once the installation is complete, you have the following applications on your computer:
MyScript Ink Retriever: with this application you download notes from the receiver
to your computer.
MyScript Trainer: this application helps you train IRISNotes
to recognize your
handwriting better.
IRISNotes
Executive: with this application you manage and edit notes, convert them
into typed text and export them to text-processing applications or via e-mail.
English English
4.2 Downloading Notes with MyScript Ink Retriever
1. Connect the receiver unit to your computer with the provided USB cable. MyScript Ink
Retriever starts automatically.
2. Type in a prex for your notes. The prex is
added to each note name.
3. Indicate where you placed the receiver. Note
that Center is recommended.
4. Click Download ink to download the notes
from the receiver.
The notes are stored in the default location.
Click the tab Retrieval Settings to see to which
folder your notes are downloaded.
Tip: to delete notes from the receiver after downloading them, click the Retrieval
settings tab > Select Advanced Settings > Select the option Clear les from device after
downloading.
4.3 Activating the IRISNotes
Executive software
Before using IRISNotes
you are recommended to activate it. Unactivated versions are only
available for 30 days.
1. Start IRISNotes
Executive.
2. You are asked to activate the software. Click Activate to do so.
3. Enter the activation code you nd on the cd-rom sleeve, and
click Activate again.
Note that an internet connection is required to activate.
English English
4.4 Editing Notes in IRISNotes
Executive
As soon as you downloaded the notes with MyScript InkRtriever, they are available in the
IRISNotes
Executive software.
In case you want to download notes manually:
Click the open icon.
The default notes location opens. Go to notes > Ink Devices, and then select the notes
you want to load.
4.4.1 Converting Notes
1. In the Conversion menu, click Conversion Settings.
2. Click OK to save the settings.
3. Double-click the note to convert, and then click the Convert button.
The converted note is displayed as editable text in the right-hand panel.
Select Text as Content type.
Select the Language
in which the notes are written.
Select the right Handwriting
style.
English English
4.4.2 Editing Notes
You can freely edit both your original notes, and their corresponding converted text:
4.4.3 Exporting Notes
To export notes, click the Export button. You can export both your original notes, and their
corresponding converted text:
*Word is not available in the Mac version.
4.5 Using IRISNotes
as mouse
You can also use the IRISNotes
pen as mouse. To switch to mouse mode:
Use the editing toolbar to edit your
ink notes: select zones, erase parts,
add new text, rotate, add space, etc.
Use the Text editing toolbar to edit
the converted text: change color,
change font, add text, align, justify,
add bullets, etc.
Original export Text export
The originals can be exported as
image les via e-mail, pasted into
*Word and saved as image.
The converted text can be pasted into
an e-mail, in *Word and in a text editor.
PC
Connect the receiver to your PC.
Hold the pen right in front of the
receiver, then press the power
button once.
Mac
Connect the receiver to your
Mac.
IRISNotes
switches
automatically to mouse mode.
English English
Tap the pen on a piece of paper. The cursor is now being controlled by the pen.
Hover the pen above a page to move the cursor.
To click an object, point with the cursor to the object, then tap with the pen to click it.
To right-click an object, point to it, then tap and hold the pen for an instant.
Note: in Windows Vista
®
and Windows 7, you can also use the IRISNotes
pen to write
directly in Microsoft Ofce 2007 applications and higher. This also works on Mac OS
10.5 in iWork
®
’08 applications and higher.
See www.irislink.com/support/userguides for more information.
5.Using IRISNotes
on an iPad, iPhone or iPod
IRISNotes
is compatible with Apple
®
portable devices running on iOS
®
3.0 and above.
With IRISNotes
you can upload your handwritten notes to your Apple device, make draw-
ings or write text directly on your device, annotate existing pictures, and so on.
Note that you cannot convert your notes into editable, typed text however.
5.1 Downloading the IRISNotes
app
1. Power on the IRISNotes
receiver and connect it
to your Apple device with the provided 30-pin USB cable.
2. You are asked to download the corresponding IRISNotes
app from the Mac App store:
Note: for iPAD, select IRISNotes
HD.
Note: for iPhone/iPOD, select IRISNotes
.
3. Download the app following the on-screen instructions.
An I.R.I.S. icon will be created on the home screen.
5.2 Uploading Notes to Your Apple Device
1. Open the IRISNotes
app.
2. Power on the receiver unit and connect it to your Apple device.
3. Tap the lightbulb icon, then tap Upload pictures.
The notes are uploaded to the Camera Roll.
English English
5.3 Editing, Writing and Drawing Notes in IRISNotes
Once your notes have been uploaded, you can edit them in IRISNotes
, make annotations,
send them via e-mail and so on. With IRISNotes
you can also make drawings from scratch
and annotate existing image les.
1.In IRISNotes
, tap the pencil icon, then select Open a Picture >
Camera Roll to open one of your notes.
2. To edit notes, power on the receiver and clip it to the top center
of a page. Now use the pen to write text on the page. The text will
appear directly on your note.
Tip: don’t write too close to the edges of the page. Otherwise your
notes will not t on the screen of your Apple device.
Tip: to edit the writing style, use the icons on the right side of the
screen.
3.When you are done:
Tap the pencil, then select Save Picture to save it, or;
Tap the send icon, then select Send by e-mail (as PDF).
6.Reference information
6.1 Overview of the receiver unit
a. Mini USB port – connect to computer through the USB
cable.
b. LCD display
c. ON/OFF button – Press and hold for about 5 seconds to
turn on the receiver. Press once to create a new note.
d. Reset button – Reset the device when then the unit does
not respond.
e. Paper Clip – Clip the unit to a page or paperboard.
a
b
c
d
e
English English
6.2 Overview of the display
The LCD screen displays the following status indications:
Receiver unit connected to computer
Memory FULL
(upload your les to your computer and delete them from memory)
Pen low battery
Receiver unit low battery
Note mode
Mouse mode
Number of saved notes in memory
6.3 Relling the IRISNotes
pen
The ink rell is standard and off-the-shelf, you can purchase it in a stationery store.
To rell the pen:
1. Press the pen button downward.
2. Pull the used rell out.
3. Insert a new rell and press the pen button upward to lock the rell.
Note: do not try to dismantle the pen. This may damage it.
7. Tips for Writing Notes
Use cursive or printed letters. Avoid stylistic writing.
Write as consistently as possible. Try to use the same size and shape each time you write a
letter or character. Also, write capital letters larger than lowercase letters.
Leave some space between words. Try not to overlap letters or characters.
Don’t hyphenate words at the end of a line. Instead, write the entire word on the next line
if you don’t have enough space.
Use lined paper, so you avoid line skew.
Use MyScript Trainer to train the software on your handwriting. For more information
on how to use MyScript Trainer go to www.irislink.com/support/userguides.
English English
Should you experience issues when using your IRISNotes
, consult the Frequently Asked
Question on our website www.irislink.com/support/faq or contact Technical Support at
www.irislink.com/support.
Français Français
Ce guide de démarrage rapide contient des instructions générales pour l'installation
et l'utilisation d'IRISNotes
Executive. Pour une explication détaillée de toutes les
fonctionnalités d'IRISNotes
Executive, veuillez consulter le chier d'aide fourni avec le
logiciel.
Les descriptions données dans ce guide sont basées sur les systèmes d'exploitation
Windows
®
7 et Mac OS
®
X Lion
. Toutes les informations du présent guide peuvent être
modiées sans préavis.
Table des matières
1. Contenu de la boîte
2. Charge des batteries
3. Rédaction de notes
4. Utilisation d'IRISNotes
sur un ordinateur Windows ou Mac OS
5. Utilisation d'IRISNotes
sur un iPad
®
, iPhone
®
ou iPod
®
6. Informations de référence
7. Conseils pour la rédaction de notes
1. Contenu de la boîte
CD-ROM d'installation d'IRISNotes
Executive
Stylo numérique, récepteur, câble USB rétractable, câble USB 30 broches, trois cartouches
d'encre et étui pour le stylo
2. Charge des batteries
AVANT DE COMMENCER : chargez le stylo et le récepteur pendant au moins 30
minutes.
1. Chargez la batterie du stylo :
Ouvrez le couvercle au-dessus du stylo.
Connectez le stylo à votre ordinateur à l'aide du câble USB
fourni.
2. Chargez la batterie du récepteur :
Connectez le récepteur à votre ordinateur à l'aide du câble USB
fourni.
Conseil : vériez que l'ordinateur est sous tension. Dans le cas contraire, les batteries ne chargeront
pas. Il faut environ 3 heures et demi pour charger entièrement les batteries.
Français Français
Tapez la pointe du stylo sur une feuille de papier. Le stylo contrôle désormais le curseur.
Faites passer le stylo au-dessus d'une page pour déplacer le curseur.
Pour cliquer sur un objet, pointez sur l'objet avec le curseur puis tapez avec le stylo pour
le sélectionner.
Pour effectuer un clic droit sur un objet, pointez sur celui-ci, tapez et maintenez le stylo
pendant un instant.
Remarque : dans Windows Vista
®
et Windows 7, vous pouvez également utiliser le stylo
IRISNotes
pour écrire directement dans les applications Microsoft Ofce 2007 et ulté-
rieures. Il est également possible de l'utiliser avec le système d'exploitation Mac OS 10.5
dans les applications iWork
®
’08 et ultérieures.
Pour plus d'informations, consultez la page www.irislink.com/support/userguides.
5. Utilisation d'IRISNotes
sur un iPad, iPhone ou iPod
IRISNotes
est compatible avec les terminaux Apple
®
exécutant iOS
®
3.0 et versions
ultérieures.
Avec IRISNotes
, vous pouvez télécharger les notes manuscrites vers les terminaux Apple,
créer des dessins ou écrire directement du texte sur votre terminal, annoter des images
existantes, etc.
En revanche, vous ne pouvez pas convertir vos notes en texte
numérique modiable.
5.1 Téléchargement de l'application IRISNotes
1. Mettez le récepteur IRISNotes
sous tension et connectez-le à votre termi-
nal Apple à l'aide du câble USB 30 broches fourni.
2. Vous êtes invité à télécharger l'application IRISNotes
correspondante depuis le site Mac
App Store :
Remarque : pour un iPad, sélectionnez IRISNotes
HD.
Remarque : pour un iPhone ou un iPod, sélectionnez IRISNotes
.
3. Téléchargez l'application en suivant les instructions qui s'afchent à l'écran.
Une icône I.R.I.S. sera créée dans l'écran d'accueil.
5.2 Téléchargement de notes sur votre terminal Apple
1. Ouvrez l'application IRISNotes
.
2. Mettez le récepteur sous tension et connectez-le au terminal Apple.
3. Tapez sur l'icône de l'ampoule puis sur Upload pictures (Charger
les notes).
Les notes sont chargées dans le dossier Camera Roll.
Français Français
5.3 Edition, rédaction de notes et dessins dans IRISNotes
Après avoir chargé vos notes, vous pouvez les modier dans IRISNotes
, faire des
annotations,les envoyer par e-mail, etc. Avec IRISNotes
, vous pouvez également faire des
dessins et annoter des chiers images existants.
1. Dans IRISNotes
, tapez sur l'icône du crayon, puis sélectionnez
Open a Picture (Ouvrir une image) > Camera Roll pour ouvrir l'une
de vos notes.
2. Pour modier des notes, mettez le récepteur sous tension puis atta-
chez-le au centre du bord supérieur de la page. Vous pouvez maintenant utiliser
votre stylo pour écrire du texte sur la page. Le texte apparaîtra directement
sur la note.
Conseil : n'écrivez pas trop près des bords de la page sans quoi les notes
seront trop grandes pour l'écran du terminal Apple.
Conseil : pour modier le style d'écriture, utilisez les icônes dans la partie droite de
l'écran.
3. Ensuite :
Tapez sur le crayon, puis sélectionnez Save Picture (Sauvegarder l'image) pour l'enregistrer.
Tapez sur l'icône d'envoi puis sélectionnez Send by e-mail (as PDF) (Envoyer par e-mail (au
format PDF)).
6. Informations de référence
6.1 Présentation du récepteur
a. Mini port USB – connectez-le à l'ordinateur à l'aide du
câble USB.
b. Ecran LCD
c. Bouton de marche/arrêt –Appuyez et maintenant le bou-
ton enfoncé pendant 5 secondes pour activer le récepteur.
Appuyez une seule fois pour créer une nouvelle note.
d. Bouton de réinitialisation – Permet de réinitialiser le
dispositif lorsque le récepteur ne répond pas.
e. Attache Attachez le récepteur à une page ou à un carton.
a
b
c
d
e
Français Français
6.2 Présentation de l'afchage
L'écran LCD afche les messages de statut suivants :
Récepteur connecté à l'ordinateur
Mémoire saturée
(téléchargez vos chiers sur l'ordinateur et effacez-les de la
mémoire)
Pile faible (stylo)
Pile faible (récepteur)
Mode note
Mode souris
Nombre de notes enregistrées en mémoire
6.3 Remplacement des cartouches du stylo the IRISNotes
Les cartouches sont standard et disponibles dans le commerce.
Pour remplacer la cartouche :
1. Enfoncez le bouton du stylo.
2. Retirez la cartouche vide.
3. Insérez une nouvelle cartouche et relâchez le bouton du stylo pour
maintenir la cartouche en place.
Remarque : n'essayez pas de démonter le stylo. Cela risquerait
de l’endommager.
7. Conseils pour la rédaction de notes
Ecrivez en lettres et caractères cursifs ou imprimés. Evitez les écritures stylisées.
Efforcez-vous d'avoir une écriture régulière. Essayez d'utiliser les mêmes taille et forme de
lettre ou de caractère. Les majuscules doivent être plus grandes que les minuscules.
Laissez un espace entre chaque mot. Faites en sorte que les lettres ou les caractères ne se
chevauchent pas.
Ne coupez pas les mots en n de ligne. Il est préférable d'écrire un mot entier sur la ligne
suivante si vous manquez d'espace.
Utilisez du papier ligné pour garder des lignes droites.
Utilisez MyScript Trainer pour apprendre au logiciel à reconnaître votre écriture. Pour
en savoir plus sur l'utilisation de MyScript Trainer, consultez la page www.irislink.com/
support/userguides.
Français Français
En cas de problèmes liés à l'utilisation d'IRISNotes
, consultez la page des questions
fréquentes (FAQ) sur le site www.irislink.com/support/faq ou contactez le support technique
via la page www.irislink.com/support.
Nederlands Nederlands
Deze Snelstartgids biedt algemene richtlijnen voor de installatie en het gebruik van
IRISNotes
Executive. Gedetailleerde instructies over het complete functiebereik van
IRISNotes
Executive, vindt u in het Help-bestand die bij uw software is geleverd.
De beschrijvingen in deze handleiding zijn gebaseerd op Windows
®
7 en Mac OS
®
X Lion
besturingssystemen. Alle informatie kan wijzigen zonder voorafgaande kennisgeving.
Inhoudsopgave
1.Inhoud verpakking
2.De batterijen opladen
3.Notities maken
4.IRISNotes
gebruiken op een Windows PC of Mac OS computer
5.IRISNotes
gebruiken op een iPad
®
, iPhone
®
of iPod
®
6.Referentie-informatie
7.Tips voor het maken van notities
1. Inhoud verpakking
Installatie-cd-rom IRISNotes
Executive.
Digitale pen, ontvangereenheid, intrekbare USB-kabel, 30-pin USB-kabel, drie
inktpatronen, tasje voor pen
2. De batterijen opladen
VOOR U START: laad de pen en de ontvanger gedurende minstens 30 minuten op.
1. Laad de batterij van de pen op:
Open het dekseltje bovenaan op de pen.
Sluit de pen aan op de computer via de meegeleverde USB-kabel.
2. Laad de batterij van de ontvanger op:
• SluitdeontvangeraanopdecomputerviademeegeleverdeUSB-kabel.
Tip: zorg ervoor dat uw computer ingeschakeld is. Anders zullen de batterijen niet opladen. Het
duurt ongeveer 3,5 uur tot de batterijen volledig opgeladen zijn.
Nederlands Nederlands
3. Notities maken
Stap 1 Maak de ontvanger op een blad papier vast.
IRISNotes
ondersteunt pagina's tot A4-formaat.
Tip: plaats de eenheid altijd in het midden bovenaan van een pagina.
Stap 2 Druk de aan-/uit-schakelaar gedurende 5 seconden in om de
ontvanger in te schakelen.
Stap 3 Maak een notitie.
Belangrijke opmerkingen:
Koppel de ontvanger los van uw computer.
Tijdens het schrijven moet u het pen-pictogram op de
display zien verschijnen.
Tips:
Houd de pen stevig vast en schrijf normaal. Probeer schuine lijnen
te vermijden.
Schrijf niet direct onder de ontvanger, maar bewaar minstens 1.5 cm
afstand.
Plaats uw vingers niet tussen de penpunt en de ontvanger. Dit
blokkeert het signaal.
Zie de paragraaf Tips voor het maken van notities aan het einde
van deze gids voor meer aanwijzers.
Stap 4 Druk de aan-/uit-schakelaar in om de huidige notitie te beëindigen en op te
slaan.
U moet de knop indrukken om de notitie in de ontvanger op te slaan.
Het getal op de display verhoogt telkens met 1 wanneer u de aan-/
uit-knop indrukt na het maken van een notitie. Het aantal geeft weer
hoeveel notities er in de ontvanger zijn opgeslagen.
U kunt tot 100 notities van A4-formaat maken.
Nederlands Nederlands
4.IRISNotes
gebruiken op een Windows PC of Mac OS computer
Om IRISNotes
te kunnen gebruiken, moet u eerst de IRISNotes
Executive software
installeren.
4.1 De software installeren
1. Plaats de IRISNotes
cd-rom in de cd-rom drive van uw computer.
PC Mac
Ga naar Computer, zoek uw cd-rom drive
en dubbelklik erop.
Dubbelklik op het cd-rompictogram op het
Bureaublad.
Dubbelklik op IRISNotesExecutive-
Setup.exe om de installatiewizard te
starten.
Dubbelklik op IRISNotes-installer.zip.
Open de map IRISNotes-Installer en dub-
belklik op het bestand IRISNotes.mpkg.
2. Volg de instructies op het scherm om de software te installeren.
Belangrijke opmerking (PC): zorg ervoor dat u de juiste taal installeert
waarin u de notities maakt.
Zodra de installatie voltooid is, beschikt u op uw computer over de volgende toepassingen:
MyScript Ink Retriever: hiermee kunt u notities van de ontvanger naar uw computer
overbrengen.
MyScript Trainer: hiermee kunt u IRISNotes
trainen om uw handschrift beter te
herkennen.
IRISNotes
Executive: met deze applicatie beheert en bewerkt u notities, converteert
u ze in getypte tekst en exporteert u ze naar een tekstverwerker of e-mailprogramma.
Nederlands Nederlands
4.2 Notities downloaden met MyScript Ink Retriever
1. Sluit de ontvanger aan op de computer via de meegeleverde USB-kabel. MyScript Ink
Retriever start automatisch.
2. Tik een voorvoegsel voor uw notities in.
Het voorvoegsel wordt aan elke notitienaam
toegevoegd.
3. Geef aan waar de ontvanger is geplaatst.
Midden is aanbevolen.
4. Klik op Inkt downloaden om de notities uit
de ontvanger te downloaden.
De notities worden op de standaard instelling
opgeslagen. Klik op de tab Instellingen voor
Ophalen naar welke map de notities worden
gedownload.
Tip: om notities van de ontvanger te wissen nadat ze ontvangen zijn, klik op de tab
Instellingen voor Ophalen > Selecteer Geavanceerde Instellingen > Selecteer de optie
Bestanden wissen van het apparaat na downloaden.
4.3 De IRISNotes
Executive software activeren
Het is aanbevolen IRISNotes
te activeren alvorens de software te gebruiken. Niet geacti-
veerde versies zijn slecht 30 dagen beschikbaar.
1. Start IRISNotes
Executive.
2. U wordt gevraagd om de software te activeren. Klik op
Activeren om dit te doen.
3. Voer de activatiecode in die u terugvindt op de hoes van de cd-
rom en klik opnieuw op Activeren.
Er is een internetverbinding nodig om te kunnen activeren.
Nederlands Nederlands
4.4 Notities bewerken in IRISNotes
Executive
Zodra de notities gedownload zijn met MyScript InkRtriever, zijn ze beschikbaar in de
IRISNotes
Executive software.
Ingeval u de notities handmatig wilt downloaden:
•Klik op het pictogram Openen.
De map met de standaard locatie opent zich. Ga naar notes > Ink Devices, en selecteer
dan de notities die u wilt laden.
4.4.1 Notities converteren
1. Klik in het menu Conversie op Conversie-instellingen.
2. Klik op OK om de instellingen te bewaren.
3.
Dubbelklik op de notities die u wilt converteren, en klik dan op de knop Converteren.
De geconverteerde notities wordt als bewerkbare tekst in het paneel rechts weergegeven.
Selecteer tekst als Inhouds-
type.
Selecteer de Taal
waarin de notities
geschreven zijn.
Selecteer de juiste
Handschriftstijl.
Nederlands Nederlands
4.4.2 Notities bewerken
U kunt zowel uw originele notities als hun overeenkomende geconverteerde tekst vrij
bewerken.
4.4.3 Notities exporteren
Exporteer alle notities door op de knop Exporteren te klikken. U kunt zowel uw originele
notities als hun overeenkomende geconverteerde tekst exporteren.
*Word is niet beschikbaar in de Mac-versie.
4.5 IRISNotes
pen als muis gebruiken
U kunt de IRISNotes
pen ook als muis gebruiken. Schakelen naar de
muismodus:
Gebruik de toolbar Bewerken om
uw inktnotities te bewerken: zones
selecteren, delen wissen, nieuwe tekst
toevoegen, ruimte toevoegen, enz.
Gebruik de toolbar Tekst bewerken
om de geconverteerde tekst te
bewerken: kleur wijzigen, lettertype,
tekst toevoegen, uitlijnen, uitvullen,
opsommingstekens toevoegen, enz.
Origineel exporteren Tekst exporteren
De originelen kunnen worden
geëxporteerd als afbeeldingsbestan-
den via e-mail, in *Word geplakt en
opgeslagen als afbeelding.
De geconverteerde tekst kan in een
e-mail worden geplakt, in *Word en in
een tekstverwerker.
PC
Sluit de ontvanger op uw PC aan.
Houd de pen recht voor de ontvan-
ger, druk dan een keer op de aan/
uit-knop.
Mac
•SluitdeontvangeropuwMacaan.
•IRISNotes
schakelt automatisch
over naar muismodus.
Deutsch Deutsch
5.3 Bearbeiten, Schreiben und Zeichnen von Notizen in IRISNotes
Nachdem Sie Ihre Notizen hochgeladen haben, können Sie sie in IRISNotes™ bearbeiten,
Anmerkungen hinzufügen, sie per E-Mail versenden usw. Mit IRISNotes™ können Sie auch
ganz neue Zeichnungen anfertigen und vorhandene Bilddateien beschriften.
1. Tippen Sie in IRISNotes
auf das Stiftsymbol und wählen Sie Open
a Picture (ein Bild öffnen) > Camera Roll (Album), um eine Ihrer
Notizen zu öffnen.
2. Wenn Sie Notizen bearbeiten möchten, schalten Sie den Empfänger ein und
klemmen ihn oben in der Mitte des Blattes an. Schreiben Sie jetzt Ihren Text
mit dem Stift auf das Blatt. Der Text wird direkt auf Ihrer Notiz angezeigt.
Tipp: Schreiben Sie nicht zu dicht an den Rändern des Blattes.
Andernfalls passen Ihre Notizen nicht auf den Bildschirm Ihres
Apple-Geräts.
Tipp: Wenn Sie den Schreibstil bearbeiten möchten, verwenden Sie die
Symbole auf der rechten Seite des Bildschirms.
3. Wenn Sie fertig sind:
Tippen Sie mit dem Stift und wählen Sie Save Picture
(Bild speichern), um es zu speichern.
Oder
Tippen Sie auf das Sendesymbol und wählen Sie dann Send by e-mail (as PDF) (als PDF
per E-Mail versenden).
6. Bedienelemente und Anzeigen
6.1 Übersicht über den Empfänger
a.
Mini-USB-Anschluss: Zum Anschluss an einen Computer über
USB-Kabel.
b. LCD-Display
c. Ein-/Austaste: Zum Einschalten des Empfänger ca. 5 Sekunden
drücken. Zum Erstellen einer neuen Notiz einmal kurz drücken.
d. Reset-Taste: Zum Zurücksetzen des Geräts, wenn der
Empfänger nicht reagiert.
e. Klemme – Zum Anklemmen des Empfängers an ein Blatt Papier.
a
b
c
d
e
Deutsch Deutsch
6.2 Übersicht über das Display
Der LCD-Bildschirm zeigt die folgenden Statusinformationen an:
Empfänger mit PC verbunden
Speicher VOLL
(Laden Sie die Dateien auf den Computer und löschen Sie sie aus
dem Speicher.)
Akku im Stift schwach
Akku des Empfängers schwach
Notizmodus
Mausmodus
Anzahl an gespeicherten Notizen
6.3 Einlegen einer neuen Mine in den IRISNotes
-Stift
Die Ersatzmine ist eine reguläre Kugelschreibermine, wie sie beispielsweise in einem
Schreibwarengeschäft erhältlich ist.
So legen Sie eine neue Mine ein:
1. Schieben Sie die Taste am Stift nach unten.
2. Ziehen Sie die alte Mine heraus.
3.
Legen Sie eine neue Mine ein und schieben Sie die Taste am Stift zum Arretieren der
Mine wieder nach oben.
Hinweis: Versuchen Sie nicht, den Stift auseinanderzunehmen.
Dies kann zu Beschädigungen führen.
7. Tipps zum Schreiben von Notizen
Verwenden Sie Kursiv- oder Druckbuchstaben. Vermeiden Sie stilistisches Schreiben.
Schreiben Sie so gleichmäßig wie möglich. Versuchen Sie Buchstaben möglichst immer
in der gleichen Größe und Form zu schreiben. Schreiben Sie Großbuchstaben größer als
Kleinbuchstaben.
Lassen Sie zwischen Wörtern einen Abstand. Versuchen Sie, Buchstaben und Zeichen nicht zu
überschneiden.
Trennen Sie Wörter nicht am Ende einer Zeile. Schreiben Sie stattdessen das ganze Wort in die
nächste Zeile, wenn in der aktuellen nicht mehr ausreichend Platz ist.
Verwenden Sie liniertes Papier, um schräge Zeilen zu vermeiden.
Verwenden Sie MyScript Trainer, um die Software mit Ihrer Handschrift zu trainieren. Weitere
Informationen zur Verwendung von MyScript Trainer nden Sie unter www.irislink.com/support/
userguides.
Deutsch Deutsch
Sollten bei der Verwendung von IRISNotes
Probleme auftreten, sehen Sie sich die häug
gestellten Fragen auf unserer Website unterwww.irislink.com/support/faq an oder wenden
Sie sich an den technischen Support unter www.irislink.com/support.
Español Español
Esta Guía rápida del usuario proporciona instrucciones generales para instalar y utilizar
IRISNotes
Executive. Encontrará instrucciones detalladas sobre todas las funcionalidades
de IRISNotes
Executive en el archivo de ayuda
entregado con el software.
Las descripciones que contiene esta guía se basan en los sistemas operativos Windows
®
7 y
Mac OS
®
X Lion
. Toda la información contenida en esta guía puede modicarse sin previo
aviso.
Índice
1. Contenido de la caja
2. Cargar las baterías
3. Tomar notas
4. Utilizar IRISNotes
en un PC con Windows PC o un ordenador con
Mac OS
5. Utilizar IRISNotes
en un iPad
®
, iPhone
®
o iPod
®
6. Información de referencia
7. Consejos a la hora de tomar notas
1. Contenido de la caja
El CD-ROM de instalación de IRISNotes
Executive
Un bolígrafo digital, una unidad receptora, un cable USB retráctil, un cable USB de 30
clavijas, tres recargas de tinta y una funda para el bolígrafo
2. Cargar las baterías
ANTES DE EMPEZAR: cargue el bolígrafo y el receptor durante un
mínimo de 30 minutos.
1. Cargue la batería del bolígrafo:
Abra la tapa de la parte superior del bolígrafo.
Conecte el bolígrafo a su ordenador mediante el cable USB
incluido en la caja.
2. Cargue la batería del receptor:
Conecte el receptor a su ordenador mediante el cable USB incluido en la caja.
Consejo: asegúrese de que el ordenador esté encendido. De lo contrario, las baterías no se cargarán.
Las baterías pueden tardar unas 3 horas y media en cargarse del todo.
Español Español
3. Tomar notas
Primer paso: je la unidad receptora a una hoja de papel.
IRISNotes
es compatible con hojas de tamaño A4 o más pequeñas.
Consejo: coloque siempre la unidad receptora en el centro de la parte superior de la hoja.
Segundo paso: pulse el botón de encendido durante 5 segundos para
encender el receptor.
Tercer paso: empiece a tomar notas.
Avisos importantes:
Desconecte el receptor del ordenador.
Al escribir, debería ver el icono del bolígrafo en la pantalla.
Consejos:
Sujete el bolígrafo con rmeza y escriba como lo haría normalmente.
Intente evitar que las líneas queden inclinadas.
No escriba directamente por debajo del receptor: deje un margen
de 1,5 cm como mínimo.
No ponga los dedos entre la punta del bolígrafo y el receptor.
De hacerlo, bloquearía la señal.
Encontrará más consejos en el apartado Consejos a la hora de tomar
notas que hay al nal de esta guía.
Cuarto paso: pulse el botón de encendido para dar por terminada la nota actual y
guardarla.
Es necesario que pulse el botón para que las notas queden guardadas
en el receptor. El número de la pantalla indicadora aumentará en una
unidad cada vez que pulse el botón de encendido tras escribir una
nota. Este número indica la cantidad de notas que hay guardadas en el
receptor.
Podrá almacenar hasta 100 notas (u hojas) de tamaño A4.
Español Español
4.
Utilizar IRISNotes
en un PC con Windows PC o un ordenador con Mac OS
Para poder utilizar IRISNotes
, primero deberá instalar el software IRISNotes
Executive.
4.1 Instalar el software
1. Introduzca el CD-ROM de IRISNotes
en el lector de CD de su ordenador.
PC Mac
Vaya a Equipo, busque el lector de CD y haga
doble clic en él.
Haga doble clic en el icono del CD-ROM del
escritorio.
Haga doble clic en el archivo
IRISNotesExecutive-Setup.exe para iniciar el
Asistente de instalación.
Haga doble clic en IRISNotes-installer.zip.
Abra la carpeta IRISNotes-Installer y ejecute el
archivo IRISNotes.mpkg.
2. Siga las instrucciones en pantalla para instalar el software.
Aviso importante (PC): asegúrese de instalar correctamente los idiomas en
los que va a escribir sus notas.
Una vez haya terminado la instalación, tendrá las siguientes aplicaciones en el ordenador:
MyScript Ink Retriever: esta aplicación permite descargar notas del receptor al
ordenador.
MyScript Trainer: esta aplicación le ayudará a entrenar a IRISNotes
para que
reconozca mejor su escritura.
IRISNotes
Executive: la aplicación para administrar y editar las notas, convertirlas
en texto impreso y exportarlas a aplicaciones de procesamiento de textos o enviarlas
por correo electrónico.
Español Español
4.2 Descargar notas con MyScript Ink Retriever
1. Conecte la unidad receptora a su ordenador mediante el cable USB incluido en la caja.
MyScript Ink Retriever se ejecutará automáticamente.
2. Introduzca un prejo para las notas. Este
prejo se añadirá al nombre de cada una de las
notas.
3. Indique el lugar de la hoja en la que colocó
el receptor. Recuerde que recomendamos la
posición Centro.
4. Haga clic en Descargar tinta para descargar
las notas del receptor.
Las notas se guardarán en la ubicación por
defecto. Haga clic en la cha Ajustes de recu-
peración para indicar la carpeta a la que desea
que se descarguen las notas.
Consejo: para eliminar notas del receptor tras descargarlas, haga clic en la cha Ajustes de
recuperación, vaya a Ajustes avanzados y, a continuación, seleccione la opción Borrar
archivos del dispositivo después de descargarlos.
4.3 Activar el software IRISNotes
Executive
Le recomendamos que active su copia de IRISNotes
antes de utilizarla. Las copias sin
activar solo se pueden utilizar durante 30 días.
1. Ejecute IRISNotes
Executive.
2. Se le pedirá que active el software. Haga clic en Activar para
hacerlo.
3. Introduzca el código de activación que encontrará en la funda
del CD-ROM y vuelva a hacer clic en Activar.
Tenga en cuenta que necesitará una conexión a Internet para
realizar la activación.
Español Español
4.4 Editar notas en IRISNotes
Executive
Nada más descargar las notas con MyScript Ink Retriever, ya podrá editarlas con el soft-
ware IRISNotes
Executive.
En caso de que preera descargar las notas manualmente:
Haga clic en el icono de abrir.
Se abrirá la ubicación por defecto de las notas. Vaya a notes > Ink Devices y seleccione
las notas que desee cargar.
4.4.1 Convertir notas
1. En el menú Conversión, haga clic en Ajustes de conversión.
2. Haga clic en Aceptar para guardar la conguración.
3. Haga doble clic en una nota que desee convertir y, a continuación, haga clic en el botón
Convertir.
La nota convertida se mostrará en forma de texto editable en el panel derecho.
Seleccione Texto como Tipo
de contenido.
Seleccione el Idioma
en el que se han tomado
las notas.
Seleccione el Estilo
de escritura manual
correspondiente.
Español Español
4.4.2 Editar notas
Podrá editar libremente tanto las notas originales como el texto convertido correspondiente:
4.4.3 Exportar notas
Para exportar notas, haga clic en el botón Exportar. Podrá exportar tanto las notas origina-
les como el texto convertido correspondiente:
*La opción de pegar en Word no se encuentra disponible en la versión para Mac.
4.5 Utilizar IRISNotes
como ratón
También puede utilizar el bolígrafo de IRISNotes
como ratón. Para activar el
modo de ratón:
Utilice la barra de herramientas de
edición para editar las notas origina-
les: seleccionar zonas, borrar partes,
añadir texto nuevo, girar el texto,
añadir espacio, etc.
Utilice la barra de herramientas de
edición de texto para editar el texto
convertido: cambiar el color y/o la
fuente, añadir texto, alinear o justi-
car el texto, añadir viñetas, etc.
Exportación de original Exportación de texto
Los originales se pueden enviar por
correo electrónico como archivos de
imagen, pegarse a *Word y guardarse
como imágenes.
El texto convertido se puede pegar
en un mensaje de correo electrónico,
en *Word o en cualquier otro editor
de texto.
PC
Conecte el receptor al PC.
Sujete el bolígrafo justo
por delante del receptor y, a
continuación, pulse el botón de
encendido una vez.
Mac
Conecte el receptor al Mac.
El modo de ratón de
IRISNotes
se activará
automáticamente.
Italiano Italiano
Questa Guida rapida per l'uso fornisce linee guida generali per l'installazione e l'uso di
IRISNotes
Executive. Per istruzioni dettagliate sulle funzionalità complete di IRISNotes
Executive consultare la guida in linea inclusa nel software.
Le descrizioni riportate in questa guida si basano sui sistemi operativi Windows
®
7 e Mac
OS
®
X Lion
. Tutte le informazioni possono essere soggette a modiche senza preavviso.
Indice
1.Contenuto della confezione
2.Carica delle batterie
3.Scrittura di note
4.Utilizzo di IRISNotes
su un computer Windows PC o Mac OS
5.Utilizzo di IRISNotes
su iPad
®
, iPhone
®
o iPod
®
6.Informazioni di riferimento
7.Suggerimenti sulla scrittura delle note
1. Contenuto della confezione
CD-ROM di installazione di IRISNotes
Executive.
Penna digitale, unità ricevitore, cavo USB avvolgibile, cavo USB a 30 pin, tre ricariche di
inchiostro, custodia penna.
2. Carica della batterie
PRIMA DI INIZIARE: caricare la penna e il ricevitore per almeno 30 minuti.
1. Per caricare la batteria della penna:
Aprire il coperchio sulla parte superiore della penna.
Collegare la penna al computer utilizzando il cavo USB fornito.
2. Per caricare la batteria del ricevitore:
Collegare il ricevitore al computer utilizzando il cavo USB fornito.
Suggerimento: accertarsi che il computer sia acceso. A computer spento, le batterie non si
caricheranno. Per caricare le batterie completamente sono necessarie circa 3,5 ore.
Italiano Italiano
3. Scrittura di note
Fase 1 Fissare l'unità ricevitore a un foglio di carta.
IRISNotes
supporta fogli no al formato A4.
Suggerimento: posizionare sempre l'unità in alto, al centro della pagina.
Fase 2 Tenere premuto il pulsante di accensione per 5 secondi per
accendere il ricevitore.
Fase 3 Iniziare a scrivere una nota.
Note importanti:
Scollegare il ricevitore dal computer.
Mentre si scrive, sarà possibile vedere l'icona della penna
sul display.
Suggerimenti:
Tenere saldamente la penna e scrivere normalmente.
Cercare di evitare di scrivere in direzione obliqua.
Non scrivere direttamente sotto il ricevitore, ma lasciare almeno
un margine di 1,5 cm.
Non mettere le dita tra la punta della penna e l'unità ricevitore.
Questo provoca il blocco del segnale.
Per ulteriori indicazioni, consultare la sezione
Suggerimenti per la scrittura delle note alla ne di questa guida.
Fase 4 Premere il pulsante di accensione per chiudere e salvare la nota corrente.
Per salvare le note nel ricevitore è necessario premere il pulsante. Il
numero sul display aumenta di 1 ogni volta che viene premuto il
pulsante di accensione dopo la scrittura di una nota. Il numero indica
quante note sono salvate sul ricevitore.
È possibile scrivere no a 100 note in formato A4.
Italiano Italiano
Premere la penna su un foglio di carta. Il cursore viene ora controllato dalla penna.
Muovere la penna sulla pagina per spostare il cursore.
Per cliccare un oggetto, posizionare il cursore su di esso, poi premere con la penna
sull'oggetto stesso.
Per fare clic col pulsante destro su un oggetto, posizionarsi su di esso e tenere premuta la
penna per un istante.
Nota: in Windows Vista
®
e Windows 7, è possibile utilizzare la penna IRISNotes
anche
per scrivere direttamente nelle applicazioni di Microsoft Ofce 2007 e superiori. Questo
vale anche per le applicazioni iWork
®
’08 o superiori per Mac OS 10.5.
Visitare www.irislink.com/support/userguides per ulteriori informazioni.
5.Utilizzo di IRISNotes
su iPad, iPhone o iPod
IRISNotes
è compatibile con i dispositivi portatili Apple
®
basati su iOS
®
3.0 e superiore.
Con IRISNotes
è possibile caricare le note manoscritte nei dispositivi Apple, fare disegni
o scrivere testo direttamente sul dispositivo, inserire commenti sulle foto scattate e molto
altro ancora.
Non è tuttavia possibile convertire le note in testo elettronico e modicabile.
5.1 Download di app IRISNotes
1. Accendere il ricevitore IRISNotes
e collegarlo
al dispositivo Apple utilizzando il cavo USB fornito a 30 pin.
2. Verrà richiesto di scaricare l'app IRISNotes
corrispondente dal Mac App store:
Nota: per iPAD, selezionare IRISNotes
HD.
Nota: per iPhone/iPOD, selezionare IRISNotes
.
3. Scaricare l'app seguendo le istruzioni a video.
Nella schermata principale verrà creata un'icona I.R.I.S..
5.2 Upload delle note nel dispositivo Apple
1. Aprire l'applicazione IRISNotes
.
2. Accendere l'unità ricevitore e collegarla al dispositivo Apple.
3. Premere l'icona lampadina e fare clic su Carica immagini.
Le note vengono salvate in Pellicola.
Italiano Italiano
5.3 Modica e scrittura di note e disegni in IRISNotes
Dopo aver caricato le note, è possibile modicarle con IRISNotes
, inserendo commenti,
inviandole via mail e molto altro ancora. Con IRISNotes
è inoltre possibile inserire disegni
ex novo e commenti sui le di immagine esistenti.
1. In IRISNotes
, premere l'icona matita, poi selezionare Apri un'im-
magine > Pellicola per aprire una delle note.
2.
Per modicare le note, accendere il ricevitore e ssarlo in alto, al
centro della pagina. Ora utilizzare la penna per scrivere testo sulla pagina. Il
testo apparirà direttamente sulla nota.
Suggerimento: non scrivere troppo vicino ai bordi della pagina. In caso
contrario, le note non si adatteranno allo schermo del
vostro dispositivo Apple.
Suggerimento: per modicare lo stile di scrittura, utilizzare le icone sul
lato destro dello schermo.
3.Terminata questa operazione:
Premere l'icona matita, poi selezionare Salva immagine
per procedere al salvataggio, oppure;
Premere l'icona invia, poi selezionare Invia per e-mail (come PDF).
6.Informazioni di riferimento
6.1 Unità ricevitore
a. Porta USB mini– collegare al computer attraverso il cavo
USB.
b. Display LCD
c. Pulsante ON/OFF– Tenere premuto per circa 5 secondi
per accendere il ricevitore. Premere una volta per creare
una nuova nota.
d. Pulsante reset – Resetta il dispositivo quando l'unità non
risponde.
e. Graffetta– Fissa l'unità a una pagina o una cartellina.
a
b
c
d
e
Italiano Italiano
6.2 Display
Il display LCD mostra le seguenti indicazioni di stato:
Unità ricevitore collegata al computer
Memoria PIENA
(caricare i le nel computer e cancellarli dalla memoria)
Batteria penna scarica
Batteria unità ricevitore scarica
Modalità penna
Modalità mouse
Numero di note salvate in memoria
6.3 Ricarica della penna IRISNotes
La ricarica di inchiostro è standard, disponibile in commercio e può essere acquistata in
cartoleria.
Per ricaricare la penna:
1. Premere il pulsante sulla penna verso il basso.
2. Estrarre la ricarica esaurita.
3. Inserire una ricarica nuova e spingere il pulsante sulla penna verso l'alto per
bloccarla.
Nota: non cercare di smontare la penna. Potrebbe danneggiarsi.
7. Suggerimenti per la scrittura delle note
Scrivere in corsivo o stampato. Evitare stili di scrittura particolari.
Scrivere nel modo più uniforme possibile. Cercare di utilizzare la stessa dimensione e
forma ogni volta che si scrive una lettera o un carattere. Utilizzare inoltre una dimensione
più grande per differenziare le lettere maiuscole dalle minuscole.
Lasciare spazio fra le parole. Evitare di sovrapporre lettere o caratteri.
Non andare a capo con il trattino alla ne di una riga. Scrivere la parola intera nella riga
successiva se non si ha lo spazio necessario.
Utilizzare fogli a righe, per evitare di scrivere in direzione obliqua.
Utilizzare MyScript Trainer per potenziare il riconoscimento della vostra calligraa da
parte del software. Per maggiori informazioni su come utilizzare MyScript Trainer, visitare
il sito www.irislink.com/support/userguides.
Italiano Italiano
In caso di problemi nell'utilizzo di IRISNotes
, consultare la sezione FAQ sul nostro sito
web www.irislink.com/support/faq o contattare l'Assistenza Tecnica all'indirizzo
www.irislink.com/support.
Português Português
Este Guia de utilizador rápido fornece directrizes gerais para instalar e utilizar o IRISNotes
Executive. Para mais informações sobre a gama completa de funcionalidades do IRISNotes
Executive, consulte o cheiro de ajuda fornecido com o software.
As descrições neste guia baseiam-se nos sistemas operativos Windows
®
7 e Mac OS
®
X
Lion
. Todas as informações estão sujeitas a alterações sem aviso prévio.
Índice
1.Conteúdos da embalagem
2.Carregar as baterias
3.Escrever notas
4.Utilizar o IRISNotes
num computador Windows ou Mac OS
5.Utilizar o IRISNotes
num iPad
®
, iPhone
®
ou iPod
®
6.Informações de referência
7.Sugestões para escrever notas
1. Conteúdos da embalagem
CD-ROM de instalação do IRISNotes
Executive.
Caneta digital, receptor, cabo USB retráctil, cabo USB de 30 pinos, três recargas de tinta,
bolsa para caneta
2. Carregar as baterias
ANTES DE COMEÇAR: carregue a caneta e o receptor durante, no mínimo, 30 minutos.
1. Carregue a bateria da caneta:
Abra a tampa na parte superior da caneta.
Ligue a caneta ao computador com o cabo USB fornecido.
2. Carregue a bateria do receptor:
Ligue o receptor ao computador com o cabo USB fornecido.
Sugestão: certique-se de que o computador está ligado. Caso contrário, as baterias não irão carre-
gar. Pode demorar até 3,5 horas para carregar totalmente as baterias.
Português Português
3. Escrever notas
Passo 1 Encaixe o receptor numa folha de papel.
O IRISNotes
suporta páginas até ao tamanho A4.
Sugestão: coloque sempre o receptor na parte superior central de uma página.
Passo 2
Prima o botão de alimentação durante 5 segundos para ligar
o receptor.
Passo 3 Comece a escrever uma nota.
Notas importantes:
Desligue o receptor a partir do seu computador.
Enquanto escreve, deve ver o ícone da caneta no ecrã.
Sugestões:
Segure bem a caneta e escreva normalmente. Tente evitar
inclinação da linha.
Não escreva directamente abaixo do receptor, mas deixe, no mínimo,
uma margem de 1,5 cm.
Não coloque os seus dedos entre a ponta da caneta e o receptor. Isto
irá bloquear o sinal.
Consulte a secção Sugestões para escrever notas no nal deste guia
para mais indicações.
Passo 4 Prima o botão de alimentação para concluir e guardar a actual nota.
É necessário premir o botão para guardar as notas no receptor.
O número no ecrã diminui por 1 sempre que prime o botão de
alimentação após escrever uma nota. O número mostra quantas notas
são guardadas no receptor.
Pode escrever até 100 notas de tamanho A4.
Português Português
4.Utilizar o IRISNotes
num computador Windows ou Mac OS
De modo a utilizar o IRISNotes
, tem primeiro de instalar o software IRISNotes
Executive.
4.1 Instalar o software
1. Introduzir o CD-ROM IRISNotes
na unidade de CD-ROM do computador.
PC Mac
Vá a Computador, situe a unidade de
CD-ROM e clique duas vezes.
Clique duas vezes no ícone do CD-ROM no
ambiente de trabalho
Clique duas vezes em IRISNotesExecu-
tive-Setup.exe para iniciar o assistente de
instalação.
Clique duas vezes em IRISNotes-installer.
zip.
Abra a pasta IRISNotes-Installer e execute
o cheiro IRISNotes.mpkg.
2. Siga as instruções no ecrã para instalar o software.
Nota importante (PC): certique-se de que instala os idiomas correctos nos
quais escreve as notas.
Assim que a instalação estiver concluída, dispõe das aplicações seguintes no seu
computador.:
MyScript Ink Retriever: com esta aplicação, descarrega notas do receptor para o
computador.
MyScript Trainer: esta aplicação ajuda a treinar o IRISNotes
a reconhecer melhor a
sua escrita.
IRISNotes
Executive: com esta aplicação, gere e edita notas, converte-as para texto
digitado e exporta-as para aplicações de processamento de texto ou através de e-mail.
Português Português
4.2 Descarregar notas com MyScript Ink Retriever
1. Ligue o receptor ao computador com o cabo USB fornecido. MyScript Ink Retriever
inicia automaticamente.
2. Introduza um prexo para as suas notas. O
prexo é adicionado a cada nome de nota.
3. Indique onde colocou o receptor. Lembre-se,
recomenda-se no Centro.
4. Clique em Descarregar tinta para descarre-
gar as notas do receptor.
As notas são armazenadas na localização prede-
nida. Clique no separador Congurações de
recuperação para a pasta em que as suas notas
são descarregadas.
Sugestão: para eliminar notas do receptor após descarregá-las, clique no separador
Congurações de recuperação > Seleccione Congurações avançadas > Seleccione a
opção Remover arquivos do dispositivo após descarregamento.
4.3 Activar o software IRISNotes
Executive
Antes de utilizar o IRISNotes
, é aconselhável activá-lo. As versões não activadas só estão
disponíveis durante 30 dias.
1. Inicie o IRISNotes
Executive.
2. É-lhe solicitado que active o software. Clique em Activar para o
fazer.
3. Introduza o código de activação incluído no envelope do CD-
-ROM e clique novamente em Activar.
Lembre-se, é necessária uma ligação à Internet para activar.
Português Português
4.4 Editar notas no IRISNotes
Executive
Uma vez que descarregou as notas com o MyScript InkRtriever, estas estão disponíveis no
software IRISNotes
Executive.
Caso pretenda descarregar as notas manualmente:
Clique no ícone Abrir.
A localização predenida das notas abre. Aceda a notes > Ink Devices e, de seguida,
seleccione as notas que pretende carregar.
4.4.1 Converter notas
1. No menu Conversão, clique em Congurações de conversão.
2. Clique em OK para guardar as congurações.
3. Clique duas vezes na nota a converter e, de seguida, clique no botão Converter.
A nota convertida é apresentada como texto editável no painel do lado direito.
Seleccione Texto como Tipo
de conteúdo.
Seleccione o Idioma
no qual as notas são escritas.
Seleccione o Estilo de escrita
adequado.
Русский Русский
4.2 Загрузка заметок с помощью MyScript Ink Retriever
1. Подключите приемник к компьютеру с помощью USB-кабеля, входящего в ком-
плект. Приложение MyScript Ink Retriever запустится автоматически.
2. Введите префикс для своих заметок.
Префикс будет добавлен к имени каждый
заметки.
3. Укажите расположение приемника.
Обратите внимание, что рекомендуется рас-
положение По центру.
4. Нажмите кнопку Загрузить рукописный
текст чтобы загрузить заметки с приемника.
Заметки будут храниться в папке по умолча-
нию. Перейдите на вкладку Параметры из-
влечения, чтобы указать папку для загрузки
заметок.
Совет. Чтобы удалить заметки с приемника после загрузки, перейдите на вкладку
Параметры извлечения > выберите Дополнительные параметры > выберите
параметр Удалять файлы с устройства после загрузки.
4.3 Активация ПО IRISNotes
Executive
Перед использованием приложения IRISNotes
рекомендуется активировать его. Не-
активированные версии будут работать только 30 дней.
1. Запустите IRISNotes
Executive.
2. Программа предложит выполнить активацию. Выберите
Активировать, чтобы сделать это.
3. Введите код активации, который находится на конверте с
компакт-диском, и нажмите кнопку Активировать еще раз.
Обратите внимание, что для активации потребуется
подключение к Интернету.
Русский Русский
4.4 Редактирование заметок в IRISNotes
Executive
После загрузки заметок с помощью MyScript InkRtriever их можно отредактировать в
IRISNotes
Executive.
Чтобы загрузить заметки вручную:
Щелкните значок открытия.
Откроется папка заметок по умолчанию. Перейдите в раздел Заметки > Устрой-
ства и выберите заметки, которые необходимо загрузить.
4.4.1 Преобразование заметок
1. В меню Преобразование выберите Параметры преобразования.
2. Для сохранения параметров нажмите кнопку OK.
3. Дважды щелкните заметку для преобразования и нажмите кнопку
Преобразовать.
Преобразованная заметка будет отображаться как редактируемый текст на панели
справа.
Выберите текст в качестве
типа содержимого.
Выберите язык,
на котором написаны
заметки.
Выберите Стиль письма.
Русский Русский
4.4.2 Редактирование заметок
Вы можете свободно редактировать исходные заметки и соответствующий преоб-
разованный текст:
4.4.3 Экспорт заметок
Для экспорта заметок нажмите кнопку Export (Экспорт). Вы можете экспортировать
исходные заметки и соответствующий преобразованный текст:
*Приложение Word недоступно в версии для Mac.
4.5 Использование IRISNotes
в качестве мыши
Ручку IRISNotes
также можно использовать в качестве мыши. Чтобы
перейти в режим мыши:
Используйте панель инструментов
редактирования для изменения
заметок: выбора зон, удаления
частей, добавления текста, добавле-
ния пробелов и др.
Используйте панель инструмен-
тов редактирования текста для
изменения преобразованного
текста: изменения цвета и шрифта,
добавления текста, выравнивания,
добавления маркеров и др.
Экспорт исходной заметки Экспорт текста
Исходные заметки можно экспортиро-
вать в файлы изображений для отправ-
ки по электронной почте, вставить в
*Word и сохранить как изображение.
Преобразованный текст можно в ста-
вить в сообщение эл. почты, *Word и
текстовый редактор.
PC
Подключите приемник к ком-
пьютеру.
Поместите ручку над приемни-
ком и нажмите кнопку питания
один раз.
Mac
Подключите приемник к
компьютеру Mac.
IRISNotes
автоматически
переключится в режим
мыши.
Русский Русский
Надавите ручкой на лист бумаги. Указатель мыши управляется ручкой.
Двигайте ручкой по странице для перемещения указателя.
Чтобы щелкнуть объект, наведите указатель на этот объект и нажмите ручку, чтобы
щелкнуть его.
Чтобы щелкнуть объект правой кнопкой мыши, наведите указатель на этот объект, а
затем нажмите и удерживайте ручку.
Примечание. В Windows Vista
®
и Windows 7 ручку IRISNotes
также можно ис-
пользовать, чтобы писать непосредственно в приложениях пакета Microsoft Ofce
2007 и более поздних версий. Эта функция также будет работать на Mac OS 10.5 в
приложениях пакета iWork
®
’08 и более поздних версий.
См. дополнительные сведения на странице www.irislink.com/support/userguides.
5. Использование IRISNotes
на iPad®, iPhone® или iPod®
Система IRISNotes
совместима с портативными устройствами Apple
®
под
управлением iOS
®
3.0 и более поздних версий.
IRISNotes
позволяет отправлять рукописные заметки на устройство Apple, делать ри-
сунки или писать прямо на устройстве, аннотировать существующие изображения и др.
Обратите внимание, что преобразование заметок в редактируемый текст
не поддерживается.
5.1 Загрузка приложения IRISNotes
1. Включите приемник IRISNotes
и подключите его к устройству Apple
с помощью 30-контактного USB-кабеля, входящего в комплект.
2. Система предложит загрузить соответствующее приложение
IRISNotes
из Mac App Store:
Примечание. Для iPAD выберите IRISNotes
HD.
Примечание. Для iPhone/iPOD выберите IRISNotes
.
3. Загрузите приложение, следуя инструкциям на экране.
На главном экране появится значок I.R.I.S.
5.2 Отправка заметок на устройство Apple
1. Откройте приложение IRISNotes™.
2. Включите приемник и подключите его к устройству Apple.
3. Нажмите значок лампочки и выберите Upload pictures (От-
править изображения).
Заметки будут переданы в Camera Roll (Фотоальбом).
Русский Русский
5.3 Редактирование, написание и рисование заметок в IRISNotes
После отправки заметок их можно отредактировать в IRISNotes
, аннотировать, от-
правлять по электронной почте и т. д. IRISNotes
также позволяет создавать рисунки с
нуля и аннотировать существующие файлы изображений.
1. В IRISNotes
нажмите значок карандаша и выберите Open a
Picture (Открыть изображение) > Camera Roll (Фотоальбом),
чтобы открыть заметку.
2. Чтобы отредактировать заметки, включите приемник и закрепите его
посередине на верхней стороне страницы. Теперь можно написать текст на
странице с помощью цифровой ручки. Текст сразу появится в вашей заметке.
Совет. Не пишите слишком близко к краям страницы. В противном
случае заметки не поместятся на экран устройства Apple.
Совет. Чтобы изменить стиль письма, воспользуйтесь значками в правой части
экрана.
3. Когда заметка будет готова
Нажмите значок карандаша и выберите Save Picture
(Сохранить изображение), чтобы сохранить его или
нажмите значок отправки и выберите Send by e-mail
(as PDF) (Отправить по электронной почте (как PDF)).
6. Справочная информация
6.1 Краткий обзор приемника
a. Порт Mini USB — подключение к компьютеру с по-
мощью USB-кабеля.
б. ЖК-экран
в. Кнопка ВКЛ/ВЫКЛ — нажмите и удерживайте при-
мерно 5 секунд, чтобы включить приемник. Нажмите
один раз, чтобы создать заметку.
г. Кнопка сброса — сброс устройства в ситуации, когда
оно перестает отвечать на команды.
д. Клипса — используется для крепления устройства к
странице.
а
в
б
д
г
Русский Русский
6.2 Обзор экрана
На ЖК-экране отображаются следующие индикаторы состояния:
Приемник подключен к компьютеру
Память ПЕРЕПОЛНЕНА
(загрузите файлы на компьютер и удалите их из памяти)
Низкий уровень заряда аккумулятора ручки
Низкий уровень заряда аккумулятора приемника
Режим записи
Режим мыши
Количество заметок в памяти
6.3 Вставка сменных стержней IRISNotes
Для ручки используются стандартные стержни, которые можно купить в канцеляр-
ском магазине.
Чтобы вставить стержень:
1. Нажмите кнопку ручки вниз.
2. Вытащите использованный стержень.
3. Вставьте новый стержень и нажмите кнопку ручки вверх, чтобы
зафиксировать его.
Примечание. Не пытайтесь разобрать ручку. Это может
привести к ее повреждению.
7. Советы по написанию заметок
Используйте курсив или печатные буквы. Избегайте стилизованного письма.
Используйте максимально единообразный почерк. Старайтесь использовать буквы
и символы одинакового размера и начертания. Кроме того, заглавные буквы должны
быть больше строчных.
Оставляйте место между словами. Избегайте наложения букв и символов.
Не переносите слова в конце строки. Если в строке недостаточно места, пишите все
слово на следующей строке.
Используйте расчерченную бумагу, чтобы избежать наклона.
Используйте MyScript Trainer, чтобы обучить ПО вашему почерку. См. дополни-
тельные сведения об использовании MyScript Trainer по адресу www.irislink.com/
support/userguides.
Русский Русский
Если у вас возникнут проблемы при использовании IRISNotes
, ознакомьтесь с до-
кументом «Вопросы и ответы» на сайте www.irislink.com/support/faq или обратитесь в
службу технической поддержки по адресу www.irislink.com/support.
أ
ب
ج
د
ـه
You write,
it types!
Quick Start Guide
for Windows®, Mac®, iPhone® and iPad®
J120305-1
English
Français
Nederlands
Deutsch
Español
Italiano
Português
Русский
I.R.I.S. Products & Technologies
I.R.I.S. - Louvain-la-Neuve (Belgium)
I.R.I.S. AG - Aachen (Germany)
I.R.I.S. Inc. - Delray Beach (United States)
I.R.I.S. HK Ltd - Hong Kong (China)
© Copyright 2012 I.R.I.S. s.a./n.v.
All rights reserved for all countries. I.R.I.S., I.R.I.S. product names, I.R.I.S. logos and
I.R.I.S. product logos are I.R.I.S. trademarks. All other products and names men-
tioned are trademarks or registered trademarks from their respective owners.
765010457770
www.irislink.com
IRISNotes1-Smartphones-cover QUG - INTL.indd 1 8/03/12 12:09
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw IRIS IRISNotes Executive 2.0 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van IRIS IRISNotes Executive 2.0 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 9,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info