Safety system of your vehicle
303
1. Route the child restraint seat strap
over the seatback.
For vehicles with adjustable headrest,
route the tether strap under the head-
rest and between the headrest posts,
otherwise route the tether strap over
the top of the seatback.
2. Connect the attaching clip to the
appropriate child restraint hook holder
and tighten to secure the seat.
The anchor fitting package consists of:
• Bolt: 5/16 inch - 18 unc
18 mm thread length
• Spring washer : 1.5 mm thickness
• Set washer: 1 mm thickness
• Anchor fitting: Comforms to ADR 34/01
WARNING - Tether strap
Never mount more than one child
restraint to a single tether or to a
single lower anchorage point. The
increased load caused by multiple
seats may cause the tethers or
anchorage points to break, causing
serious injury or death.
WARNING
A child can be seriously injured or
killed in a collision if the child
restraint is not properly anchored
to the car and the child is not prop-
erly restrained in the child restraint.
Always follow the child seat manu-
facturer’s instructions for installa-
tion and use.
B230B01FD
Bolt (5/16"-18 mm)
Spring washer
Child restraint hook
holder
Set washer
B230B02FD
Bolt (5/16"-18 mm)
Spring washer
Child restraint hook
holder
Set washer
2GHA3300
Type A
Type B
