329
Safety system of your vehicle
2. Fasten the lap/shoulder belt latch into
the buckle. Listen for the distinct “click”
sound.
Position the release button so that it is
easy to access in case of an emergency.
3. Buckle the seat belt and allow the seat
belt to take up any slack. After installa-
tion of the child restraint system, try to
move it in all directions to be sure the
child restraint system is securely
installed.
If you need to tighten the belt, pull more
webbing toward the retractor. When you
unbuckle the seat belt and allow it to
retract, the retractor will automatically
revert back to its normal seated passen-
ger emergency locking usage condition.
If the child seat moves, readjust the
length of the seat belt. In Australia/NZ the
child restraint manufacturer's instructions
must be followed when fitting the unit to
the vehicle.
C030103AFD-EA
Securing a child restraint seat with
“Anchorage Fitting Packages” sys-
tem (if equipped)
Child restraint anchorage fitting pack-
ages are located on the floor behind the
rear seats.
OEN036104
OEN036101
OFD037015R
OFD037050R
Type A
Type B
