3.10.5.1 To start to use Automower® Direct
1. Download the Automower® Connect app on
your mobile device.
2. Select Automower® Direct on the start
screen of the Automower® Connect app.
3. Start Bluetooth® on your mobile device and
on the product, refer to
To start the product
for the first time on page 26
.
4. Go to the
Settings
symbol in the display and
activate Bluetooth®.
5. Select the product to pair with in the
Automower® Connect app.
6. Enter the PIN code for the product.
Note: You have access to the menus and
functions as long as you are in Bluetooth® short-
range.
3.10.6 User interface overview
The user interface overview below shows examples of Automower® Connect.
Automower® Connect
3.11 To start the product for the first
time
When the product is switched on for the first time,
there are some basic settings to do before the
product can start to operate.
1. Push the ON/OFF button for 3 seconds to
switch on the product.
Note: The Bluetooth® pairing mode is on for
3 minutes and the LED light is flashing blue.
If the product does not pair with Bluetooth®
in 3 minutes, switch off the product. Wait
until the LED status indicator is not lit, and
then switch on the product again.
2. Enter the factory PIN code.
3. Log on to your Husqvarna account in the
Automower® Connect app to pair your
product with Automower® Connect.
Note: It is recommended to pair your product
with Automower® Connect to get access to
all functions in the product. If it is not
necessary to pair your product with
Automower® Connect, push the
arrow
symbol to continue to the menu.
4. Start Bluetooth® on your mobile device.
5. Select
My mowers
in the Automower®
Connect app, and then select the plus sign
(+).
6. Select model. The Automower® Connect
app searches for available products within
short-range (Bluetooth®).
26 - Installation 1427 - 002 - 20.12.2019