634397
27
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
23
FXC110 Fluxgate Compass
When the autopilot is in STANDBY mode, the large display shows the reading of the electronic
compass. Verify that there is no interference and the value indicated by the main compass of the
vessel is almost the same.
In case of a significant difference, try to change the position of the compass (if interfered) or turn
it on its axle until the difference is cancelled.
Automatic Compensation of the FXC110 Fluxgate Compass
The compass placing is always a challenge because of the magnetic interferences you may find
aboard.
This autopilot allows the automatic compensation without the help of a technician. In fact, you
only need to go out at calm sea with the vessel avoiding crowded areas and to carry out the
following operations:
Switch on the autopilot in STANDBY mode and make the vessel turning slowly on circle. In order
to obtain a good compensation, the maximum angular speed should not exceed 4 degrees per
second (corresponding to a complete revolution taking 1.5 minutes at least).
Enter the INSTALLATION mode and press AUTO/TRACK key for at least 2 seconds and wait until
the display visualizes “COMPASS AUTOMATIC COMPENSATION - WAIT.” At this stage, release the
AUTO/TRACK key. Wait until the vessel has carried out a complete revolution checking always
that the angular speed is steady and under the maximum limit. If the vessel, during this turn
should rock significantly (for instance a big wave, the passage of another vessel), repeat again the
procedure.
Keep on turning in circle until the autopilot will display the maximum amount of the interference
and the result of the compensation: “SUCCESS” if succeeded, “FAILED” if failed.
At this stage, the procedure is completed and you only need to press the STANDBY key in order
to return to the normal functioning.
If the AutoCompensation failed, it means that the chosen location for the installation of the
compass is too interfered and therefore the location should be changed.
The AutoCompensation procedure can be interrupted in any moment by pressing STANDBY key
or by removing the power supply to the autopilot.
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Humminbird SCP110 Course Computer bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Humminbird SCP110 Course Computer in de taal/talen: Engels als bijlage per email.

De handleiding is 1,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info