594430
11
Verklein
Vergroot
Pagina terug
1/30
Pagina verder
11
Actual model may vary from images shown.
PICKING UP SPILLS
Your HOOVER
®
carpet cleaner may also be used to
pick up small liquid spills (one gallon or less,
never to exceed 1/8” in depth). Do not submerge
unit in liquid.
Place the floor nozzle with the SpinScrub
®
mode
selector to SPILL PICK-UP in front of the spill, pull
the nozzle very slowly over the spill.
CAUTION
! !
To reduce the risk of injury from moving parts,
unplug cleaner.
To prevent possible leaking, remove clean water tank
(Fig. 2.8) and Dirty Water Tank (Fig. 2.13). Set tanks
aside (do not set tank on furniture).
With handle in upright position, tilt cleaner back so
that handle rests on the floor.
3.4 Position the squeegee, larger lip facing up, on
bottom of nozzle until it snaps securely into place.
Make sure the outside edges are pushed up tight
against the nozzle.
Remove squeegee to return to cleaning carpets.
Read “Before you begin cleaning” instructions on
page 9.
CLEANING HARD FLOORS
How to Attach Squeegee for Hard Floor
Cleaning (Available on select models only)
Do not use the carpet cleaner on unsealed
hardwood floors.
To prevent damage to wood floors, follow
the flooring manufacturer’s cleaning
recommendations.
If using cleaner on sealed wood floors, inspect
floor surface for worn finish, bare wood or
separated joints. It is not recommended to use
the cleaner on wood floors if any of these
conditions exist.
3.4
1. Fill clean water tank according to instructions for
Fig. 2.9.
2. Fill detergent container with HOOVER
®
Hard Floor
Cleaner according to instructions for Fig. 2.10.
3. Slide SpinScrub selector to GENTLE SCRUB.
4. Dry hands and plug cleaner into a properly
grounded outlet.
5. Step on handle release pedal and lower handle to
operating position.
6. Set Wash/Rinse Setting switch to WASH (Wash/
Auto-Rinse™ when available). Turn cleaner on.
7. To release solution, press trigger. Slowly move
cleaner forward and backward over area to be
cleaned. Water and detergent will be released on the
forward stroke. For models with Auto-Rinse feature,
a water-only rinse will automatically be released on
the reverse stroke.
8. To pick up dirty solution, release trigger and slowly
move cleaner over area where solution has just been
dispensed. Use both forward and reverse strokes.
9. If rinsing the floor is desired, set Wash/Rinse
Setting switch to RINSE. Repeat steps 7 & 8. This
setting provides a water-only rinse in both the
forward and reverse strokes.
Rinsing is not necessary, but will help remove
detergent residue from the floor.
10. Empty recovery tank when the motor sound
becomes higher pitched and there is a loss in suction
(see “Automatic shut-off”, Fig. 2.19).
Continue>>
CAUTION
! !
CLEAN SURGE
®
BUTTON
(Available on select models only)
CAUTION
! !
Do not use the carpet cleaner to pick up
flammable or combustible liquids or chemicals.
CAUTION
! !
DO NOT USE THIS EXTRACTOR ON HARD
FLOORS UNLESS YOU HAVE THE PROPER
HARD FLOOR ATTACHMENT. USING THIS
MACHINE ON HARD FLOORS WITHOUT
PROPER ATTACHMENT MAY SCRATCH OR
DAMAGE YOUR FLOOR.
When finished picking up spills, follow “After
Cleaning” instructions.
The Clean Surge
®
button can be used to dispense
extra solution when cleaning particularly soiled areas
of carpet or spots.
To use, press Clean Surge
®
button while squeezing
solution trigger. For normal solution spray, release
button and continue to squeeze solution trigger.
11
La shampouineuse HOOVER
MD
peut également
servir à ramasser de petits dégâts liquides (un
gallon ou moins; ne jamais ramasser les dégâts de
plus de 1/8 po de profondeur) sur une moquette. Ne
pas plonger l’appareil dans un liquide.
Régler le sélecteur de mode SpinScrub
MD
en
position SPILL PICK-UP (ramassage de liquides
renversés), puis placer la buse pour plancher
devant le liquide renversé. Passer la buse très
NETTOYAGE DES PLANCHERS DURS
Pour prévenir les fuites, retirer le réservoir d’eau (fig.
2.8) et le réservoir de récupération (fig. 2.13). Mettre
les réservoirs de côté (ne pas les mettre sur un
meuble).
Mettre le manche en position verticale, puis
incliner l’aspirateur de façon à ce que le manche
repose au sol.
Lire les instructions de la section « Avant de
commencer le nettoyage » à la page 9.
Pour réduire les risques de blessures causées
par des pièces en mouvement, débrancher
l’appareil avant d’en effectuer l’entretien.
MISE EN GARDE
!
!
(Seulement sur certains)
MISE EN GARDE
!
!
Ne pas utiliser l’aspirateur sur les parquets
en bois dur non imprégné.
Pour éviter d’endommager les planchers en
bois, suivre les recommandations du fabri-
cant en matière de nettoyage.
Si vous utilisez l’aspirateur sur des planchers
en bois imprégné, en inspecter la surface pour
s’assurer qu’il ne présente pas un fini usé, des
parties non vernies ou des joints séparés. Il
n’est pas recommandé d’utiliser l’aspirateur
sur un plancher en bois présentant l’une de
ces conditions.
Continue>>
Installation du racloir pour le nettoyage
des planchers durs
3.4
3.4 Positionner le racloir, le grand rebord vers le haut,
au bas du suceur de manière à l’enclencher en
place. S’assurer que les côtés extérieurs sont
fermement appliqués contre le suceur.
Retirer le racloir pour reprendre le nettoyage de
moquettes.
BOUTON CLEAN SURGE
MC
(sur certains modèles)
Le bouton Clean Surge
MC
peut servir à appliquer une
quantité supplémentaire de solution pour le
nettoyage de taches tenaces ou de zones
particulièrement sales sur la moquette.
Pour utiliser cette fonction, appuyer sur le bouton
Clean Surge
MC
tout en serrant la gâchette pour
Le modèle d’aspirateur peut varier de
celui illustré.
Ne pas utiliser l’aspirateur Carpet
MC
pour
ramasser des liquides inflammables ou
combustibles ou des produits chimiques.
MISE EN GARDE
!
!
NE PAS UTILISER CET ASPIRATEUR
EXTRACTEUR SUR LES PLANCHERS À
SURFACE DURE À MOINS DE DISPOSER DE
L’ACCESSOIRE APPROPRIÉ. L’UTILISATION
DE CET APPAREIL SUR DES PLANCHERS À
SURFACE DURE SANS L’ACCESSOIRE
APPROPRIÉ PEUT ÉGRATIGNER OU
ENDOMMAGER LE PLANCHER.
MISE EN GARDE
!
!
l’application de solution. Pour la vaporisation normale
de la solution, relâcher le bouton et maintenir
enfoncée la gâchette pour l’application de solution.
RAMASSAGE DE LIQUIDES RENVERSÉS
lentement au-dessus du dégât liquide en ne faisant
qu’aspirer pour commencer.
Une fois terminé, suivre les instructions de la
section « Après le nettoyage ».
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hoover Max Extract 77 SpinScrub bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hoover Max Extract 77 SpinScrub in de taal/talen: Engels, Frans, Spaans als bijlage per email.

De handleiding is 2,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info